Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

woodworking in Albany, NY

Posts

woodworking in Albany, NY

#1

woodworking in Albany, NY

les winter

>I have some business in the Albany/Troy area of New York. Anything woodworking-related I should try to see? A few sticks of cherry would be nice to bring home.

thanks

Les

Re: woodworking in Albany, NY

#2

Re: woodworking in Albany, NY *LINK*

Don Orr

>The biggest and best wood store in the area is a little north of Albany/Troy in Ballston Spa. Curtis Lumber is a nice place to drool over all kinds of cool wood. They have a website at www.curiouswoods.com to give you an idea. In Rensselaer county where Troy is there are some sawmills out in the country. Henkels comes to mind.

When are you going to be in the area ? I live about 20 miles west of Albany and work there every day.


Curtis Lumber

Re: woodworking in Albany, NY

#3

Re: woodworking in Albany, NY

Ralph Ambrosio

>Les,

I am not sure they give tours but if you show up at the boat yard I think you might see some real woodworking going on.

http://www.scaranoboat.com/sail.html

Let us know how you made out.

Ralph

Re: woodworking in Albany, NY

#4

Re: woodworking in Albany, NY

les winter

>I'm leaving this afternoon for two days. I'm hoping to stop in at the lumber yard tomorrow if I finish my labors early enough.

thanks for the tip.

Re: woodworking in Albany, NY

#5

Re: woodworking in Albany, NY

Gene Gauss

>I second the recommendation of Curtis Lumber. To get there, go North on Rt. I87 about 15 miles and get off at Exit 12. At that exit, turn left onto Rt. 67 westbound and you'll see Curtis Lumber on your left. Their hardwood display building is well worth the stop.

Re: woodworking in Albany, NY

#6

Re: woodworking in Albany, NY

Rob Sandow

>I went to college in Troy. As I recall, the walls of The Ruck, a bar on 3rd st downtown, are made of wood.

Rob

Re: woodworking in Albany, NY

#7

Charles Hot Dogs and Teds Fish Frys

Dustmaker Mike

>Yup there was some sort of wood in the buildings.

Re: woodworking in Albany, NY

#8

Curtis Hardwoods

les winter

>Well I'm back from Albany and I did find time to stop in at Curtis Lumber/Curious Hardwoods. Very nice place. Good selection of exotics, decent selection of american hardwoods. Prices about average, very friendly folks. Definately worth the trip. I bought an 8/4 and a 4/4 walnut board, both of which are pretty decent. It appears that what they have on hand varies quite a bit from week to week, so call first if you need something in particular.

Thanks all for your suggestions.

regards

Les

Re: woodworking in Albany, NY

#9

Re: Curtis Hardwoods

Don Orr

>Glad to hear you had a nice time. The folks at Curtis are usually very helpful. You're right about the prices and their stock, but they're the only ones in the area that stock anything really interesting. Our turning club meets in their office/education building.

If you're ever back in this area, let me know and maybe we can toss back a couple of cold ones and swap woodworking stories.

Re: woodworking in Albany, NY

#10

Re: Curtis Hardwoods

les winter

>Excellent idea!

regards

Les