Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

More Frank Miller Lumber Tour Stuff *LINK*

Posts

More Frank Miller Lumber Tour Stuff *LINK*

#1

More Frank Miller Lumber Tour Stuff *LINK*

Jennifer@Indy.USA

>Hi all. Well today about 22 of us ventured into eastern Indiana to pay a visit to Frank Miller Lumber Company. I took my camera along to catch a bit of the day for all of you who couldn�t make it. As usual there are tons of pictures I wish I would have taken, but didn�t. For starters a group shot of everyone. The day started off very foggy and driving to the eastern part of Indiana on I-70 was a bit nerve wracking but it had burned off by about 9 O�clock. I had my trusty GPS locked in on Frank Miller Lumber in Union City, IN and was looking forward to the drive. I love getting out of Indy and driving into rural parts of Indiana. There�s something really special about small towns in the Midwest and I guess until you visit some of them you don�t quite understand it. Parts of them seem to have stood still while time just swept on by. No matter how new your car is or what GPS you have suctioned to your windshield, modernization just doesn�t come easy to some small towns and I love that I feel almost like I�m from another place and time when I visit them. Union City is a little town just north of Richmond, IN. One of my favorite things about the drive there is little State Road 227 where you get off of I-70. It is one of those long, straight, two lane roads that you would swear was built by a roller coaster designer. The short, steep rolling hills are the ones that make your stomach tickle so bad that you can�t help but giggle as you drive over them. If you have kids in the car you�ll have full blown laughter and probably a �go faster!" from the back seat! Anyway, just another bonus for making the drive today. I don�t advise �going faster� on the way home with a load of lumber. I shouldn't do what my son says sometimes.

We had a really great group today from all over. Jamie Donaldson gets the prize for coming the farthest (Lexington, KY) and also for being the latest. Sorry Jamie, I couldn�t resist. He had a good excuse, fog and a bad tangle on the bridge coming over the river. As usual Daren and Josh from FML gave our two groups a great tour of the mill. I tried to capture most of the goings on that we saw today with my camera. We were not allowed to take pictures up on top of the milling portion of the mill where most of the action was happening. That is their policy and we respected that. They have a very specialized head saw that was designed in house just for the purpose of quarter sawing and getting the most out of every log. The sawyer has a huge job of watching how the log is placed on the rack and watching the laser that guides the giant �bandsaw�, and then he flips the log and runs it through again. It�s an amazing process to watch. They have a metal detector that each log is sent through and from what we were told it can detect a metal tack in the middle of a 4ft diameter log. When it does detect metal it kicks the log out and moves on to the next. The engineering that went into the plant and the way the logs are moved so efficiently and flipped and flopped on the proper side for quarter sawing is just amazing to watch. Huge logs are tossed like toothpicks. One of the things that FML is so proud of is the fact that they use 100% of the log. All through the plant you can see conveyors where sawdust and cut offs and bark and debris is jiggled on down the line to either be used as fuel for the plant, or to burn in the boiler for the kilns or some other resource to be sold as mulch, or to paper mills or packaging mills in the area.

You get a real sense of pride from the people who work there while visiting. Daren pointed out several things to us that confirmed that as well. The way the lumber is stacked and stickered is clean and perfectly lined up with the stickers all in perfect rows up each stack. They are still hand stacked. The ends of their boards are painted with a tan paint not for any other reason but to look clean and crisp when they are shipped. One of the rooms we visited was a grading room where they were also straight line edge ripping and planning boards to be shipped. Daren pointed out that the guy who was feeding boards into the machine was none other than Mr. Miller himself. It was pretty cool to see the third generation owner of the company there getting his hands in it. I�d guess he was late 60�s early 70�s. Certainly didn�t need to be there, but must love every minute of it.

Afterwards we enjoyed a really nice lunch at a local place that I�d never been to so I as glad it turned out a good choice. It is a chocolate maker�s shop and eatery. We all had a nice lunch and I don�t think anybody left without indulging in some sort of sweet yum-yum! Thanks to all who came and made it yet another really fun WoodCentral gathering. This is what makes this forum the best there is in woodworking. The people, the camaraderie and the common denominator of woodworking. Thanks to Ellis too for allowing us to play in his sandbox! We would not have had this fun day without your hard work and bringing us all together via Woodcentral. By the way...while we were trying to decide how to pay for lunch somebody suggested to bill it to WoodCentral. For the record I�ll have you know that I was the first to vote that down :)

Here�s a link to some photos of the mill and a few of the surrounding area on my drive. Wish you all could have been there! It really was a fun day.

Jennifer


Frank Miller Lumber Tour Pictures

Re: More Frank Miller Lumber Tour Stuff *LINK*

#2

Re: More Frank Miller Lumber Tour Stuff

Roy Anderson

>And Jennifer deserves a big round of applause for organizing this event.

Re: More Frank Miller Lumber Tour Stuff *LINK*

#3

Re: More Frank Miller Lumber Tour Stuff

Jim Shaver Oakville, Ont.

>Hi Jen,

What a super slide show of the day. I have been to FML a few times and I know what you mean by thier sense of pride, it's wonderful.

You did a great job organizing the day for so many to share, your sense of pride also shows in how much you love the countryside and peace of a lovely state. Kudo's to you too, only wish I could have been there myself.

My GPS says Union City is 7 1/2 hours away...sweet eh!

Take care,

Jim

Re: More Frank Miller Lumber Tour Stuff *LINK*

#4

Re: More Frank Miller Lumber Tour Stuff

John Weber

>Jen,

Sorry I missed it, we had a 2 hour delay that messed up the morning.

Glad you guys had a great time.

John

Re: More Frank Miller Lumber Tour Stuff *LINK*

#5

A bit of correction

Larry in NW Ohio

>I was the one who suggested to send the bill to Ellis, but I didn`t see Jen say anything about voteing it down. But I surely seen her laughing and clapping the loudest:-)) Jen I`m very glad you set this up, for one thing I have enough wood to finish the baby bed now, and a piece of Bubinga that nneds a place to go sometime. Thanks again Jen. And a special Thanks to Darren, who I followed all the way to Cinn. on al kind of back roads of very pretty rolling hills and blooming trees and flowers. He took me all the way to the VA hospital, if not I surely would have got all mixed up with my sense of direction. Larry in Ohio

Re: More Frank Miller Lumber Tour Stuff *LINK*

#6

Re: A bit of correction

Jennifer@Indy.USA

>Larry it was lovely to have met you :)

I was a great day for a drive wasn't it.

Re: More Frank Miller Lumber Tour Stuff *LINK*

#7

Re: A bit of correction

Larry in NW Ohio

>It was great finally meeting you and of course everyone else, but I need to apologize now because I will not remember but a couple of people. I hope we can meet again very soon. If anyone is around the northwest Ohio area, your more than wecolme to stop and visit my dungon. Larry in Ohio

Re: More Frank Miller Lumber Tour Stuff *LINK*

#8

Re: More Frank Miller Lumber Tour Stuff

Jim(IN)

>Jen

I also want to thank you for organizing the tour thru FML. Although I only live 30 min away, I had never been thru the tour of the sawmill(been to the outlet store more times than the wife knows about though). It was very interesting and informative. I wish I could have stuck around for lunch. Maybe next time.

P.S. Called Jet Monday and they sent me a new inverter for the lathe. Got it today and maybe turning on it tomorrow evening. Can't wait.

Thanks again

Jim Swift

Re: More Frank Miller Lumber Tour Stuff *LINK*

#9

You are so amazing!

Joanne Adler in Pt. Pleasant, PA

>First you organize such a great day. Then you find a cool place for lunch with CHOCOLATE. Then you manage to take really cool pictures. Finally, you write up a story that is so engaging, it's like watching a movie (even without looking at the slideshow). Hey, where's the popcorn?! It's about 9:30 and I just got home after a really long day and almost went right to bed. So glad I stopped by here first. And then I almost stopped the slideshow and might have missed the coolest pix at the end of the neat roadtrip you got to take to get to FML. Kind of looks like here a little. Thanks for sharing all that and you.

Joanne, who's really glad Jen now has a GPS unit in her car. ;-)

Re: More Frank Miller Lumber Tour Stuff *LINK*

#10

Re: You are so amazing!

Jennifer@Indy.USA

>Joanne, I was wishing I could put music to the slide show but all they have is funky stuff with lyrics that don't make much sense with lumber mill pics. I was thinking...some of Joanne's picking would go just fine with these pictures. Since I can't load music onto Photobucket, I just opted for silence :)

Hope your peeps are doing good and you can see like a hawk. Hope your Daddy is doing okay too. I've been thinking about you.

Jen

Re: More Frank Miller Lumber Tour Stuff *LINK*

#11

Ellis Walentine

Thanks to you, too, Jen

Ellis Walentine

>I don't know how you manage to organize things so well, but your efforts are much appreciated by everyone around you, including me. You should have sent me the lunch bill. I would have had a good chuckle. :-)

Wish I could have joined you all at FML, but all the great pics and stories you and Mike have posted have really brought the event to life for the rest of us stay-at-homers. Thank you so much!

Ellis