It is not a BS scam, Forrest.
Basil
>In Ray's application it is getting close in my opinion, maybe, but not quite.
I'll try to keep this short.
The main advantages to a radial ply tire is less "heat buildup" and lower "rolling resistance". Dry nitrogen helps keep that temperture buildup lower allowing one to run a higher pressure to gain full advantage of the lower "rolling resistance" of the radial tire properties. It also protects the inner tire structure (carcass) from deterioration allowing the tire to be used over a longer time period. I will admit that for passenger cars I don't see a big need or advantage in the use of nitrogen under normal conditions and time periods. But then the tire manufacturer knows more about "his" tires and their proper use and maintance than I do.
"Rolling resistance" is measured like going up a hill, the more 'rolling resistance' the steeper the hill (and more heat). And 'heat buildup' can be extremely dangerous in load bearing tires that are found on trucks and heavy equipment where speed and max-load is critical to profits. In large mining trucks (especially of the 350 ton class, appox. 700 ton total wt.) with $30,000 to $40,000 thousand dollar per tire cost and fuel rates of 1,000 gallons and up per 8 hour shift, it becomes extremely important to run dry nitrogen.....all the time. Worn out but otherwise good tire carcusses can be recapped and used over and over again in these applications. Recapping doesn't happen to passenger tires anymore mainly because now the "recapper" is required to assume the liability for tire safety thereby relieving the original manufacturer of that liability. Lawsuits aren't a big problem for those "large" tire recappers but would be for smaller tires.
Now, if anyone wants to run nitrogen in your tires, here's what you can do. Go by a good Scuba diving shop, tell'em what you want to do, have then rig you up a regulator and 'air' hose to fit a nitrogen tank. You can get a nitrogen tank at just about any welding supply house or good locally owned auto parts store. .......and have at it.
Funny story....at least to me. The tires on my equipment weren't that large, 6' to 8' in diameter, 30" to 36" wide and cost $3 to $4 thou. each. They usually had no more than 60 psi each. I was told that at 60 psi they each had the explosive equivalent of 6 sticks of dynamite. For 30 years I worried about the one under the drivers seat blowing out and hurting someone. I put new tires under the driver or at least kept the best tire on the machine under the driver. I had 4 blowouts in 30 years, 3 under the drivers seat and I was sitting on every D*mn one of'em when they went out.....got a sore butt, jammed spine and the dangest headaches everytime......LOL Seems that little black cloud has always been with me.....LOL
Basil



