Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Looking for a 3" Carbide SawBlade

Posts

Looking for a 3" Carbide SawBlade

#1

Looking for a 3" Carbide SawBlade

WarrenC

>Looking for a 3" Carbide Saw Blade. I can find a 4" and a 2" (for biscuit joiners). any idea where I can look.

thanks

Warren

Re: Looking for a 3" Carbide SawBlade

#2

Re: Looking for a 3" Carbide SawBlade

Chuck in ND

>A little more information might help. Like what type of tool it's going on, the arbor size, etc. I can only imagine what the tech support people go through every day, and THEY GET PAID FOR IT !

Re: Looking for a 3" Carbide SawBlade

#3

Re: Looking for a 3" Carbide SawBlade

Warren Chernoff

>I'm building a saw to hollow out the cup portion of a ladle. Arbor size is not important as I can build to fit. Just need to find a source for the blade. A minature table saw blade

Re: Looking for a 3" Carbide SawBlade

#4

Re: Looking for a 3" Carbide SawBlade

Chuck in ND

>Makita makes a couple 3 3/8" blades, but I didn't see any that are carbide tiped.

Re: Looking for a 3" Carbide SawBlade

#5

Re: Looking for a 3" Carbide SawBlade

Chuck in ND

>Warren, I did some more searching and found some 3 3/8" carbide blades. Go to this link and scroll down to the accessories. I hope this helps. http://www.amazon.com/Makita-5090DW-8-Inch-Cordless-Circular/dp/B00004YODY

Re: Looking for a 3" Carbide SawBlade

#6

Re: Looking for a 3" Carbide SawBlade

Warren Chernoff

>Chuck,

thank you

Re: Looking for a 3" Carbide SawBlade

#7

Re: Looking for a 3" Carbide SawBlade

Chuck in ND

>Your welcome Warren. Let us all know how it works out for you.

Re: Looking for a 3" Carbide SawBlade

#8

JL

Re: Core box router bit? Or box router bit?

JL

>Would those work?

Re: Looking for a 3" Carbide SawBlade

#9

Re: Looking for a 3" Carbide SawBlade

Curly Smith

>These might be a bit pricey but:

Solid Carbide Slotting Saws

http://cmitools.com/product/carbide/cbslotting.htm

Solid Carbide Slitting Saws

http://cmitools.com/product/carbide/cbslitting.htm

Then again, these aren't exactly cheap...

The Proxxon mini-saw uses a 3 1/8" blade, replacement blades here:

http://www.mhcrafters.com/servlet/the-1942/Proxxon-36-Teeth-Carbide/Detail?sfs=36768721

3 1/16" plate joiner

http://www.toolstoday.com/searchtt.aspx

Re: Looking for a 3" Carbide SawBlade

#10

Found them

Larry in NW Ohio

>Warren I think I found just what your looking for I found them at SEARS. They are a 3" Carbide saw blade with a .394 arbor and 20 theeth #9 61272, they also had one that was a diamond wheel, I hope this helps. Larry in Ohio

Re: Looking for a 3" Carbide SawBlade

#11

Re: Found them

Warren Chernoff

>Thanks Larry,

Sears, who would have thought?

Re: Looking for a 3" Carbide SawBlade

#12

Re: Found them

Warren Chernoff

>can't get the Sears blades in Canada, bummer