Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Need a small piece of walnut

Posts

Need a small piece of walnut

#1

Need a small piece of walnut

Joe in a Cleveland suburb

>Hi folks.

I'm going to make a small end table for my 16 y.o. daughter.

I need a smallish chunk of walnut to make some tapered table legs. I'm looking for some 6-8/4 material. Enough that will yield 4 legs that are about 1-1/8" square by about 27" long and will be bastard grain once milled.

If I can't find the walnut for the legs, I have cherry I could use for the table base and legs. Then I'll use walnut for the top - but I don't like that idea. Plus she would like me to use walnut.

Anyway, this is a long way of asking if anybody could recommend a mail order place that will bother with such a small order.

Thanks!

Joe

Re: Need a small piece of walnut

#2

Re: Need a small piece of walnut

John McGaw

>Surely Cleveland has at least one seller of wood. Have you looked in the Yellow Pages? Checked online references? Asked local woodworkers? It is just too big a city not to have at least one source.

Re: Need a small piece of walnut

#3

JL

Re: Need a small piece of walnut *LINK*

JL

>Atlanta Wood Products may help - they've shipped me some small pieces.


Atlanta Wood Products

Re: Need a small piece of walnut

#4

Re: Need a small piece of walnut *LINK*

Stew Pharis

>Joe,

Woodcraft in Bedford had some nice walnut when I was in there last Thursday. I believe some of it was 8/4. It's worth a call to see what they have.

It's a bit of a drive from the west side, but you might also want to think about going to Doll Lumber to see what they have.


Doll Lumber

Re: Need a small piece of walnut

#5

Re: Need a small piece of walnut

Tom O'Connor

>Rockler or Woodcraft stores usually have small pieces of walnut I just picked up a 2' piece at a local cabinet shop.

Re: Need a small piece of walnut

#6

Try Matt Burak @ tablelegs.com

Art Silva

>

Re: Need a small piece of walnut

#7

Re: Need a small piece of walnut

Larry in NW Ohio

>You might try www.gobywalnut.com they have all kind of size of walnut. I bought some from them a couple years ago. They seem to be nice to work with. Larry in Ohio

Re: Need a small piece of walnut

#8

Re: try www.garresonlumber.com

Joanne near Dansville, NY

>I buy lumber from them locally, but I know they do a lot of mail order business too. They have good quality wood @ good prices.

Joanne

Re: Need a small piece of walnut

#9

Re: Need a small piece of walnut

John K Jordan

>Gary Evans here in TN has (or at least had) some great pieces of very dry walnut. I got a few for turning. These were about 4"x4" by however long you need. If he doesn't see this, you can find Gary here or on the Turning forum and send him a message. I think Gary will ship a toothpick or a beam anywhere.

Do you by chance have a need to drive to TN anytime soon? I've got walnut logs and a sawmill and I'm not afraid to use it! I could fix you up with some green walnut complements of the kind neighbors who keep giving me trees.

JKJ

Re: Need a small piece of walnut

#11

Re: Need a small piece of walnut

Howard Norman

>I would check with Woodworkers Source. You can contact them from WoodCentral. They should have it in stock. They are located in Phoenix so I stop by one of their stores as needed but I know they do a fair amount of mail order business.

Great people to deal with from my experience.

h

Re: Need a small piece of walnut

#12

Jim DeLaney, Austintown, Ohio

Re: walnut - Doll Lumber

Jim DeLaney, Austintown, Ohio

>You could drive down to Doll Lumber in Newton Falls. They should have what you want - and a lot of other great stuff, too!

Newton Falls is less than an hour South of Cleveland, on Route 534. Doll Lumber is several miles North of town, so actually closer to Cleveland. On the way down, you could stop for lunch at Mary Yoders Amish Restaurant in Middlefield, and make a nice little trip out of it.

Jim D.

Re: Need a small piece of walnut

#13

Alright Jim

Dustmaker Mike

>do you just travel by the resturants(-; I know I do when I find good ones I will go aways out my way.

Re: Need a small piece of walnut

#14

Now if you needed some Alder

Dustmaker Mike

>I got it. Or some Big Leaf Maple I have it but no Walnut or Cherry. I guess I have to hit a lumber yard around here to catch up on the local hardwoods.

Re: Need a small piece of walnut

#15

Re: Need a small piece of walnut

Gary Evans Tallassee, TN

>Hi Joe,

I haven't read any of the other responses, but I have some 4"x5"x96" walnut that has been drying for more than 20 years in a barn. This stuff is nice. I'll give you the WoodCentral discount.

Send me an email.

Gary

Re: Need a small piece of walnut

#16

Jim DeLaney, Austintown, Ohio

Re: Alright Jim

Jim DeLaney, Austintown, Ohio

>Sometimes it just works out that way, Mike. I hit Yoder's whenever I'm near Middlefield, and go to the Pie Factory just about every time I go to Hartville (Like last Friday).

I also go to Chalet in the Valley in Charm whenever I go to Berlin/Millersburg, and visit Keim Lumber/Hardware (last Tuesday).

So...what's a good place in Kent?

Jim D.

Re: Need a small piece of walnut

#17

Not sure anything round here

Dustmaker Mike

>can compare to the names you just mentioned. I don't eat out much when I am home I do enough when I travel that Home Cooked or BBQ are the way I go when I am home.

Re: Need a small piece of walnut

#18

email me if you don't find some

Bill Tindall, E.TN

>I still have a few hundred feet in inventory and wouldn't mind doing a fellow WC person a favor. I once sent a pound of sheep fat to someone on the hand tool side.

Re: Need a small piece of walnut

#19

sheep fat

John K Jordan

>Bill,

hijack - Speaking of fat sheep, I'm bottle-feeding a lamb now in addition to the goat. He's pushing 4 weeks old, growing like crazy, and thinks he's a goat. Started nibbling at solid food this week.

Do you know where I could find used (cheap) shears? I assume hand shears will be sufficient for one animal.

JKJ

Re: Need a small piece of walnut

#20

Jim DeLaney, Austintown, Ohio

Re: Now if you needed some Alder

Jim DeLaney, Austintown, Ohio

>Mike,

If you want kiln dried, rough lumber try Trumbull Dry Kiln. They've got pretty much everything in local woods, and the prices are very hard to beat.

It's owned by the same guy that started Doll Lumber. He sold Doll a few years back and started the kilns as a hobby. Now he's got five warehouses and the kilns.

Trumbull Dry Kilns

Jim D.

Re: Need a small piece of walnut

#21

Re: Need a small piece of walnut

Barry Irby

>What is Bastard Grain?

I have some I could send you if nothing else works for you, but I'm not sure it is bastard.

Re: Need a small piece of walnut

#22

bastard grain

John K Jordan

>"Bastard grain typically refers to growth rings orientated between 30 degrees and 60 degrees to the surface" (Understanding Wood, Hoadley, pg 14), i.e., a loose description of grain orientation somewhere between side/slash/flatsawn and rift/edge/quartersawn.

JKJ

Re: Need a small piece of walnut

#23

Thanks for the help and suggestions all!

Joe in a Cleveland Suburb

>

Re: Need a small piece of walnut

#24

Re: Need a small piece of walnut

James Clair

>Have you found your black walnut? I have plenty of 8/4 black walnut. Some very interaesting grain patterens to it. It is more red in color then you would expect. But it finishes very good.

Re: Need a small piece of walnut

#25

Re: bastard grain

Barry Irby

>Thanks John.

I made a side board or hunt table recently and cut all the heart pine so that it was quartersawn. Except that I cut the legs that are abut 2 x 2 so the grain ran through them at as nearly a forty five as I could. That way the grain is stripey or quartersawn flooring on all four sides. I thought they were Rift Sawn. Guess its two different terms for the same thing or maybe I was wrong. Either way, the legs look good.