Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

I need a foot switch

Posts

I need a foot switch

#1

I need a foot switch

Bill Tindall, E.TN

>I would like to add a foot operated on/off switch to my router/router table. Years ago I bought one for the drill press and find it indispensable but I can't remember where I got it. Anyone know a source?

Re: I need a foot switch

#2

Here's one ...

Mike Farinella

>http://woodworker.com/cgi-bin/FULLPRES.exe?PARTNUM=908-190&gclid=CPP9nbae2JICFRwbagodl2Jo_w

Re: I need a foot switch

#3

Dale Lenz

Re: Find an X-ray Tech.

Dale Lenz

>My brother, Tom, works on X-ray machines in hospitals and got me an used foot switch, used on X-ray tables(?). Tom fixed me one up some 15 years ago, had to take the switch apart about a year ago to clean out off the wood dust. If you can get one, they are probably better made than the 15-20 dollar foot switches you will find. Just need to figure out how to wire them into an outlet box, Tom did that for me also. Good brothers are worth their weight in gold.

Re: I need a foot switch

#4

Re: I need a foot switch *LINK*

albertabob

>This is the type I have been using for about 25 years.

The plug into you electricalbox and you just plug the tool into the back of the plug.

Be careful to make a resting spot off the floor for it when not in use so you don't get any surprises.

Bob


img

FOOT SWITCH

Re: I need a foot switch

#5

I like LectricAir for safety. *LINK*

David Barnett - SW Florida

>I prefer pneumatic foot switches. I use one at my router table, grinders, stationary sanders, bandsaw, lathe, and so on. Safe around spills, wet floors, and water-cooled gem saws. I do so much freehand shaping and two-handed positioning & fixturing I'd have a hard time without them.

There are other air switches but they often cost much more. Woodcraft no longer carries them, but...


LectricAir sells direct.

Re: I need a foot switch

#7

Re: I need a foot switch

Chicago Bob

>Bill,

Harbor Freight has them for ~$15.00 each in their Johnson City store, currently on sale. I normally don't recommend Harbor but I bought one 10 plus years ago for my drill press and it still works fine. When I was back home last week visiting my family in Tennessee, I stopped by with my brother and purchased one - I wish now that I had picked up a couple more at that price.

I disassembled it when I got back home and the wire guage was correct and it was soldered at all connections rather than crimped. It is rated 110v, 15 A.

RegaRDS

Bob Haines

Re: I need a foot switch

#8

Re: I need a foot switch

Larry in NW Ohio

>Bill I just went to Harbor Freight and they have two of them. One is $13 and the other is $15, so you might want to check that out first. Larry in Ohio