Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

OT Lawn mowers *LINK*

Posts

OT Lawn mowers *LINK*

#1

OT Lawn mowers *LINK*

Virgil Johnson, Versailles KY

>My faithful dumpster derived Lawnboy refused to start today. I'm tired of F'in (fooling) with the thing. Who has purchased a new push mower lately that they would recommend? I have a 1/2 acre lawn that I will use this to trim with and mow the front lawn. I spotted this one at the local big box. Anyone own one? For all of you who hate OT messages but read them anyway.....To keep this woodworking related I'll mention that if I can get a mower that will start I'll have more shop time.


http://products.howstuffworks.com/troy-bilt-55-hp-

Re: OT Lawn mowers *LINK*

#2

Re: OT Lawn mowers

John Weber

>Virgil,

I just bought a new mower about 2 weeks ago. I hit a stump last year with my trusty Toro and that spelled a slow death. It would still run, but the slightly bent crank did it's damage over the course of the year. I borrowed my Dad's Troy-Bilt to finish out the season and hated it, but it was an older model.

I had a hard time matching the quality of my old Toro in a new mower. Many of the mowers just don't seem like they would last. My Toro was almost $500, 12 years ago, mowers today seem a lot cheaper in both price and quality.

Anyway, I ended up with a Honda. The design seems about the best going, they are quite, and Honda engines have a great history. I think they start a little more then the mower you linked to, but not that bad.

John

Re: OT Lawn mowers *LINK*

#3

Re: OT Lawn mowers

Nat Robison

>My old mower quit about 2 years ago when the deck rusted out and one of the wheels came off. I didn't have a lot of time to research mowers and went with a Troy-Bilt similar to yours that I bought from Lowe's for about $270.

If yours has a Honda engine, that's a plus. I believe mine has a Briggs & Stratton that promises to start by the second pull. I have to say that it has started by the second pull every time, even on the first start-up of the year.

So far it's been fine. I can't think of any annoying down-sides to my Troy-Bilt. My lot is also about .5 acres.

Re: OT Lawn mowers *LINK*

#4

Re: OT Lawn mowers

Ken Oakley-Sunny St. Cloud, Fla

>I have a Honda I use rarely because my son in law does my meager lawn on his riding mower. I have had the mower at least 10 years and no matter how long it sits it will still start on the first pull.

Of course I turn the valve in the gas line off and let the mower stop when the gas supply stops. Keeps carburetor from gumming up. Also put stabilizer in tank to keep gas fresh.

Re: OT Lawn mowers *LINK*

#5

Re: OT Lawn mowers

Ron Hildreth

>Virgil,

I think a good mower is really relevant to a good engine and how well it's maintained. I own both Brigg & Stratton and Honda powered eguipment, and I think both are dependable and run great. I do, however, take great pains in servicing them frequently, and storing them properly in the fall by thoroughly cleaning and lubricating moving parts, adding fuel stabilizer to the gas, cleaning the air filter and changing the oil. Although I haven't tried the Honda powered pressure washer yet, the B & S lawn mower started first pull this year, and it was new over five years ago.

Surprising how many people just push their mower into the garage in the fall, do nothing to store it, and cuss at it come spring when it won't start. My neighbor supplies me with about two hours of humor each year, watching him trying to get his started! My BIL makes a fair living off people like this, including my neighbor!

Ron in Iowa

Re: OT Lawn mowers *LINK*

#6

Re: OT Lawn mowers

Ken Garlock, Collin County Texas

>Hi Virgil. We are on our 2nd Snapper in 20 years. The first one had a POS Briggs&Straton "vacu-jet" carb that just would not behave. I replaced that engine with A Kohler and it lasted until 2 years ago. The mower deck and the engine both wore out.

Our new one is a 21" Snapper with another B&S engine because LOML wanted an electric start. IF it were a matter of engines only, I would have settled for the pull-rope Yamaha model.

We like the continuously variable speed control.

We strongly dislike the OSHA imposed shutdown bar on the handle. We use a piece of elastic wrapped around the bar and handle to keep the mower running.

Yes, I would buy the Snapper again.

Good Luck on your search,

Ken

Re: OT Lawn mowers *LINK*

#7

Re: OT Lawn mowers

Glenn Madsen, SF Bay Area

>I was in the retailer where I bought my last Honda mower, and figured out that it has been 20 years I've had that tool. One of the best I've ever owned.

Of course, today, the lawn is less than 200 square feet, so it isn't like the Honda ever really warms up. There's more space in the vegetable gardens...

Re: OT Lawn mowers *LINK*

#8

This one's easy on gas

Lee Schierer - McKean, PA

>You can't go wrong with one of these. It mows the grass and fertilizes at the same time....


img

Re: OT Lawn mowers *LINK*

#9

but this one's not afraid of dogs

John K Jordan

>And it doesn't need shots and vet bills. Or shearing.

JKJ


img

Re: OT Lawn mowers *LINK*

#10

Re: OT Lawn mowers

Stuart Hough

>Virgil, I got a similar model made by murray, hi-wheel and all, with the Honda 5.5 hp engine 4 years ago from Sam's club for about $169.00. Have had zero problems, started on the first pull all but one time (I forgot to turn petcock back on..my fault), and I can find the maintenance item at Lowes and HD, since they sell a lot of units with Honda engines. I would give them a 3-thumbs-up, if I had that helpful third hand!

Re: OT Lawn mowers *LINK*

#11

Re: OT Lawn mowers

David

>I too second a Toro. When I had about 1/2 and acre to mow my wife insisted that an el cheapo special was all we needed. The next season we held a somber funeral service for cheapo (the lawn mower, not my wife :) ) and bought the 6.5 hp Toro I wanted in the first place.

I grew up with a Toro, my father still uses it 40 plus years later. The damn thing won't die. Mine is now 10+ years old and it still starts on the first pull. Never been in for service. All I do is check the oil and change it, when I remember! Most of the time I use it for edging but when the tractor won't start it faithfully plows through 3 acres of lawn and I occasionally use it to know down trails when the ground is too soft for a tractor.

Re: OT Lawn mowers *LINK*

#12

Re: OT Lawn mowers

Jennifer@Indy.USA

>Virgil, I've had a relatively low line Craftsman for nearly 15 years that year after year starts on pull one or two. I do little to no maintenance on it other than blow out the filter, change the plug every year or two and add fuel stabilizer in the winter to whatever is left in the tank. I think I'll replace the blade this year. It's got to be shot.

I don't normally advocate buying Craftsman stuff, but this one has served me well.

There's always a goat? But they are a drag to train.

:)

Re: OT Lawn mowers *LINK*

#13

Re: OT Lawn mowers

Ray, SW Ohio

>I have had a Lawnboy now for 5 yrs, usually starts on the second pull, its been throught a flood, change the gas/oil mixture and it started right up. I beleive they are made by the same people that make Toro. My 2�. I had a Toro that lasted 17 yrs before giving up the ghost.

Re: OT Lawn mowers *LINK*

#14

Re: OT Lawn mowers

Brian Aust - Nevada, IA

>I have a Troy-bilt riding mower and will never buy another one. It is 5 years old and I've had to repair something on it every year I've had it. Troy-bilt is made by MTD who also makes Cub Cadet, Yard-Man, Yard Machines, Bolens, McCulloch and White Outdoor. I've heard Cub Cadet is a good mower so I wonder if it is a higher grade than Troy-bilt. Once my mower dies I'm getting a John Deere from the dealer, the JD's from Lowes aren't real JD's.

Re: OT Lawn mowers *LINK*

#15

Re: OT Lawn mowers

Brint in Richmond, VA

>When I went looking for one 2 years ago, I found that our local Sears (not the Sears outlet, although that might be a good place to look, too) had slightly used models that it was selling at a good discount. They offered the service plan on these, and I ended up getting a used Briggs & Stratton model plus 2 years of warranty service for what it would have cost me to buy the same B&S model new without the service contract. As others have said, however, I have yet to need any service on it -- it starts every time I try it, almost always on first pull (and I don't take near as good care of it as others on this post do...)

Good luck --