Re: Dovetail jig ? *LINK*
charlie belden
>Woodchuck29 wrote:
> Personally I'd rather use a dovetail jig. I don't
> get some of the hype of hand cut dovetails.
> Nowdays I feel speed is just as important as
> quality. I can cut them faster and get a
> tighter fit, meaning a better glue joint with a
> jig.
Depends on how many you've got to cut,
how uniform your stock prep is and how
familiar you are with your dovetail jig.
I don't care what the brochures and ads
say, NO router based dovetail jig on the
market that I'm aware of, "requires NO
test cuts". If the "depth of cut" isn't
REALLY close to your stock thickness
the joint won't fit right. And getting
that just right IS a trial and error tuning
process - no matter what THEY say -
and I have, and use, probably the simplest
to set up and use dovetail jig out there
- the AKEDA. (and if you want to know why
I say that - see the attached link - and be
forewarned - there are SEVERAL pages of
WHY)
Now if it's speed and efficiency you want
why use dovetails at all - a Lok-Miter router
bit makes pretty strong corner joints
a LOT faster than cutting dovetails - even
with a router and a decent dovetail jig - along
with some experience with both.
I guess it comes down to whether wood-
working is a journey, or a means to an end.
If you want to get there FAST - take a plane.
If you want a possible adventure, which might
include meeting some interesting people
along the way, and seeing some interesting
things you didn't even know existed - drive
and stop if there might be some roses
to smell, if it's over a mile or so, walk if it
isn't.
And re: the original message - I totally
agree with adding, and using dovetails
when they'll do the job - even if not
"perfect" - great joint.
charlie belden
AKEDA Dovetail Jig



