Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Is this a good Idea?

Posts

Is this a good Idea?

#1

Is this a good Idea?

Larry in NW Ohio

>After some searching I fianlly found some "Slip Plate" and I can say that it was a good find, I think. It seems to be what they say. For the people that have used it for awhile, what do you think of it, and what do you think of putting it on a Table saw blade and how about a bandsaw blade? I put it on a TS blade and I`m very surprized at how well it sticks to the blade. I wonder if it would be any good on a lunch box planer table? Maybe I`m getting carried away a little. Have a good week Larry in Ohio

Re: Is this a good Idea?

#2

Only if...

Clint Searl, at the base of Haycock Mtn

>you want any wood that it touches to get indelible black schmears.

Clint

Re: Is this a good Idea?

#3

JL

Re: Is this a good Idea?

JL

>Hmmm - I wax my lunch box planer, jointer, table saw and band saw with wax and it helps things slide. So I wouldn't see anything wrong with using Slip Plate on a lunch box planer table - it can't be that different from most waxes.

I'd never heard of putting it on table saw blades though. I guess it would keep the pitch and sap down. I'm not sure about band saw blades as the compound would get on the tires. Let us know how it works with the table saw please.

Re: Is this a good Idea?

#4

Re: Only if...

Larry in NW Ohio

>Clint It doesn`t seem to do that, a lest I haven`t seen any. If you let it dry the way it should, it seems to stay on the blade pretty good. Larry in Ohio

Re: Is this a good Idea?

#5

I wouldn't think so!

Lee Schierer - McKean, PA

>I've never used or seen Slip-it, so the following comments may or may not be accurate with regard to that particular product.

While you might want things not to stick to a TS blade, a BS blade is different. The TS blade is clamped between steel flanges. The BS blade is driven by the friction between the tires and the band. Eliminating that friction with a slippery material would most likely lead to the blade slipping during tough cuts. Once your tires are contaminated witht eh slippery sub=stance, it might require replacement of the tires and the blade to get the traction back.

Lee