Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Sheds: Build, Buy, Plastic, etc...

Posts

Sheds: Build, Buy, Plastic, etc...

#1

Sheds: Build, Buy, Plastic, etc...

John Weber

>I need a shed. I like the idea of building one, but my Uncle took forever to build a 12x16 barn from a set of plans. It's looks good, nice design (includes a loft), and well built but cost him around $4000 to complete. I can buy a Lifetime 11x16 plastic shed (maintenance free) for around $2500. While I love the idea of low maintenance especially for a shed, I think it might be a cop out for a woodworking to have a plastic shed. The local DIY stores have kits, prebuilt frames, etc..., for around $1500, but I'm sure extras would add to the cost.

Any ideas? I would like a quality shed that doesn't break the budget or take forever to build. There are also some area builder that will come and build on site, but again cost gets out of my budget for the size I like. The 11x16 is ideal, I can go to 12 if necessary, space is just a hair tighter.

Thanks

Re: Sheds: Build, Buy, Plastic, etc...

#2

Re: Sheds: Build, Buy, Plastic, etc...

Nat Robison

>Check out the May issue of Fine Homebuilding. There's an article in there that profiles a guy who specializes in shed construction.

Re: Sheds: Build, Buy, Plastic, etc...

#3

Even numbers is cheaper

Dustmaker Mike

>use even numbers that way all the material can be used. Like a 12X 16 is 3 sheets of ply by 4 sheets. It just works easier that way. As for building I like useing 2x4 on 16" centers and T111 for sideing with OSB or 1/2" ply which ever is cheaper for the roof. Now flooring can cost the most. Do you want concrete or wood or? A building that size I would put a foundation under it. I have also used rail road ties to place it on. Just make sure it is level when you start it will make your life easier. Snow load may be a factor so at least a 5/12 pitch. I have built a lot of sheds most take a little over a weekend to build but last a long time. I like concrete floors but I have used 3/4" ply on 16" or 12" centers depending on what it will be used for. Have building it

Re: Sheds: Build, Buy, Plastic, etc...

#4

Re: Even numbers is cheaper

John Weber

>Thanks, I like concrete too, but cost to pump is to high, and I'm not going to wheel barrow that much concrete. 12' is doable, but that puts me 2' to the dog run fence, enough room to work, but tight. I'm not sure about a floor, some of the local builders use t&g 2x6 floors, but I'm thinking 3/4". Right now I'm planning half to sit on an existing concrete pad, with the other half on piers.

It took me weeks to build the kids playset, and that was only suppose to take a weekend. I guess I'm slow.

Re: Sheds: Build, Buy, Plastic, etc...

#5

Re: Sheds: Build, Buy, Plastic, etc...

Ron Hildreth

>John,

If you live in town, check your local codes first. The small Burg I live in makes us build out of wood only. High winds have created too much damage to neighbors property because the metal or plastic shed (and it's contents) blew away.

BTW- Iowa is now number 1 in wind power. Imagine that!

Ron in Iowa

Re: Sheds: Build, Buy, Plastic, etc...

#6

Re: Sheds: Build, Buy, Plastic, etc...

Brint in Richmond, VA

>I built an 8x12 last year and found Taunton's Building a Shed to be extremely helpful. Detailed instructions, great tips, and several different styles to choose from.

PS -- it took more than a weekend... ;-)

Re: Sheds: Build, Buy, Plastic, etc...

#7

Re: Sheds: Build, Buy, Plastic, etc...

Glenn Madsen, SF Bay Area

>The notion that plastic is forever is offset by the fact that after a few years, it only looks like it's been there forever. And I wouldn't want to get rid of that much faded junk.

I built an 8'x12' shed six years ago, or so. That's the largest I could do, without a building permit. It's sort of a garden folly, really. Spent maybe $2500 on it, including paying the labor for one of the guys to side and roof it when I got really busy at work, and October was pressing in.

It's been just fine. It has windows and electricity, and all the yard tools and machines. There's really not enough room for a full sized shop on our lot here in the suburbs. That's what the garage is for, anyway.

Re: Sheds: Build, Buy, Plastic, etc...

#8

Around here...

Gary Camp, Bend, Oregon

>11 by 16 would require a permit, 120 sq. feet, "temporary" ie: not on a poured foundation and no electricity are what you can legally build without a permit.

glc

Re: Sheds: Build, Buy, Plastic, etc...

#9

cop out

David Yoho

>John, definitely check your local codes for minimum sizes before permits are required.

Personally, I went the turn-key route. I didn't have the time when I knew I needed a shed, so DIY kits were out. I also didn't see anything I liked on the local pre-made market. There was a national company here (Heartland - may still be for all I know) at the time that pre-manufactured the shed of your choice in their warehouse and shipped it to your site unassembled on a trailer along with a guy that assembles it. It took him one day and all I had to do was paint it to match my house.

If you can locate an outfit like that in the area, that would be my recommendation.

David

Re: Sheds: Build, Buy, Plastic, etc...

#10

Heartland *LINK*

David Yoho

>Heartland is now Backyard Buildings and More. Check the link below -


Backyard Buildings and More

Re: Sheds: Build, Buy, Plastic, etc...

#11

Re: Sheds: Build, Buy, Plastic, etc...

Carol - now in NC Nebraska

>I had to do this 2 years ago to store household stuff when I went off to school.

I looked at the pre-fab stuff and found the price to be double the cost of materials plus delivery. And the materials were undersized - 2x3's instead of 2x4's, 3/8" ply instead of 1/2", 5/8" floor ply, instead of 3/4" or better 1". Also did not include foundation or paint. And 7' wall height instead of 8'.

Just so you can compare apples to apples.

I got my brother to help me and we finished in 5 days. It is up on deck pylons. 10x16. Has only one door and a skylight for now. That was for security. Next year I will move it to a more permanent locate and it will house my stationary tools. It will also get some windows, insulation, wiring, etc. Not too bad for two old folks who no longer work fast.

I am CAD literate so I drew the plans and ordered material accordingly. That process is not included in the five days. The five days began with getting the material on day one and finishing the roofing on day 5. Paint came later. Cost was around $1600. I am sure today it would be 50% more!

My two cents.

Re: Sheds: Build, Buy, Plastic, etc...

#12

Borrow a nail gun if you can

Jim in VA

>I've built two substantial sheds and a fancy children's playhouse. I found that I could build much cheaper than I could buy, but it does involve time. You have to decide whether it is worth it or not.

All of my small buildings were on piers or on RR ties that sat on gravel. Floors were 3/4 inch t&g plywood on 2x6 or 2x8 joists. Build the floor first and you can use that as a platform to assemble the walls. A shed is small enough that you can build each wall flat, attach the T1-11 siding and then move it out of the way (with the help of a friend) until everything is ready to go up. I also fabricate my own "trusses" from 2x4s. I do the layout on the shed floor and than use that as a pattern for all. Then the fun part starts. Once you have all the pieces done it goes really, really fast. Raise each wall, make sure it's plumb, brace and nail in place. Set the trusses. Now all you have to do is the attach the plywood for the roof and shingle. (And paint. But with a roller it goes really fast.)

If you can borrow, rent, or buy a nail gun or two (pretty cheap now a days), you can speed things up considerably.

Re: Sheds: Build, Buy, Plastic, etc...

#13

Chet Kloss

Here's what I did... *LINK*

Chet Kloss

>I got some help from my wife, my kids and a niece & a nephew.

It was a great family thing. Check out the build video.

,,,,,,,,,,,,Chet


Family Shed Build

Re: Sheds: Build, Buy, Plastic, etc...

#14

Check out ready-made...

John E in SC

>My Dad, before he passed away, used to sell pre-fabbed metal buildings (Robin and Clarke brands, but there are lots of others.) They were wood-framed, and had aluminum siding. They were made in a warehouse, and trucked to us or delivered directly to the customer. With delivery and setup included, they were ususally cheaper than you could buy materials and build yourself. As a matter of fact, we sold several to a local contractor, who said he couldn't pay his employees to build one for the price of the building. These things held up remarkably well also. We had 2 in our backyard that my Dad used to store "good junk" in, which we recently sold after cleaning them up. One of them was probably 15 years old, and looked almost like new. Just a thought. I would NOT look for something like this at Lowe's or HD. Most are sold by individual dealers, sometimes in addition to truck caps, etc.

Good luck.

John

Re: Sheds: Build, Buy, Plastic, etc...

#15

Texas leads in wind power by a big margin

Curly Smith

>A just-released annual report from the American Wind Energy Association says California had 2,439 megawatts of wind-power generation capacity in 2007, second only to Texas' 4,446 megawatts. (http://www.mercurynews.com/healthandscience/ci_8821207)

Iowa is 4th...

Texas led the nation with 4,446 megawatts of installed capacity, followed by California, Minnesota and Iowa, the association's report said. (http://seattletimes.nwsource.com/html/businesstechnology/2004323863_bizbriefs03.html)

Re: Sheds: Build, Buy, Plastic, etc...

#16

Steven Antonucci

Money isn't the best reason to decide which way -

steve antonucci

>to go!

I built a shed from a kit because 1.) it was marginally cheaper than having one delivered & 2) because it couldn't be delivered where I wanted it and had to be built. (so why not me?)

If you want an honest answer, for the size you are discussing and the fact that you mention the odd measurement (11x16), you might be better off contracting. As others have mentioned, it may require a permit (100sf in my town) and based upon the "loft", I'm guessing it's also pretty tall. Anyone can build a shed with a friend or two if they have a moderate amount of hammer and saw skills, but it's certainly not worth the couple of $$$ you save vs. delivery.

My neighbor helped me and we spent two days putting the kit together. When he ordered his, it was done it 15 minutes, since it slid of the truck in place. Price difference was maybe $200 for the same size. I couldn't get a truck to my spot, but I would have built it anyway because I like building things- but otherwise it makes no sense at all.

Steven

Re: Sheds: Build, Buy, Plastic, etc...

#17

A.J. Hamler

Shed tips

A.J. Hamler

>As several have suggested, check your local codes before doing ANYTHING.

Also, if you have any kind of neighborhood association, check with them, too. Some associations simply don't permit sheds.

Unless the design of the shed is radically different from that of your house, do your best to make it match the house. At the very least, get the same kind/color of shingles and paint the exterior walls to match your house's paint as closely as you can. If you have siding on your home, consider getting the same siding for the shed. Same thing for windows and doors, if possible. The point here is to make the house and shed look like they are a set, and not to make the shed look like just an "add-on" to the yard. This will not only help resale value, but it just plain looks better. Your neighbors will like it better, too.

Speaking of neighbors, keep in mind that some people hate sheds. If your neighbor is one of those people, be prepared. Even neighbors who don't intriniscally hate sheds might not like yours if it's placed in such a way that it blocks a favorite view, blocks sunlight that they enjoy, or in any way impacts their yard/home aesthetically.

Some people use the outside of shed for storage as much as the inside. I've seen ladders, wheelbarrows and trashcans stored up against the outside walls of a number of sheds around town. This can look cluttered and ugly in a hurry. (Some people place these items on the "back side" of the shed where they can't see them, but give their neighbors a fabulous look at all their junk. That won't win any friends.)

A.J.

Re: Sheds: Build, Buy, Plastic, etc...

#18

Jesper, Denmark

Are you sure?......

Jesper, Denmark

>Hot air don't count.....

Former card carrying member of the Texas Bulshippers association.

Re: Sheds: Build, Buy, Plastic, etc...

#19

Re: Sheds - Codes and my $2.00 worth

Ray Carson, Lawrenceville, NJ

>Since I'm currently enrolled in Building Code classes I can't stress the importance of checking the local building codes. In Jerzee, it's 100 sq.ft. max. floor area without a foundation. Stick built.

There are certain requirements for sheet metal and plastic sheds now also so check this out with your local code Dept. Plastic sheds around this way have to have a restraining device of some sort tied to a anchoring in the ground....that is a certain depth.

In my opinion, I'd stay clear of plastic sheds, the appeal is nice, but they expand and contract like nobodys business. They will over time become faded...and some will become brittle or the fasteners holes will become weakened from the expansion and contraction. This makes for a weak joint. Now I'm sure someone will disagree and argue that these types are fine and I'm okay with that. I'm no expert on plastics sheds or plastics. I'm speaking from experience and the advice from friends and neighbors. To me, it makes sense.

I've built a few sheds and I'm in the process of finishing the plans for another at my current residence.

I'm also ACAD proficient and drew the plans myself so that was a big help. I could lay out all the sizes, roof angles, bill of materials, etc. It makes shopping for the materials a WHOLE lot easier. Even if your not CAD literate, I recommend creating a bill of materials.

You'll save a lot of time running back and forth from your Home Depot, Lowes, home center, lumber yard......and possibly all of the above.

In my experience, building a stick frame shed is more economical than buying a kit, or having a pre-built delivered to the site. Of the half a dozen sheds I've built, biggest being 12 x 20, a shed that is 8 x 12 usually takes about 3-5 days. This of course depends on some of the items I've thought of below.

Some things to factor in:

Knowledge of tools

Access / ownership of tools

Assistance from friends and family (raising walls, carrying sheet goods, etc.)

Access to the building site for materials

Delivery time for materials (if delivered)

Pick up and load time of materials (if purchasing) Getting the material to your residence can be an issue. I usually rent or borrow a truck because I own a SUV. Home Depot and Lowes rent theirs for a reasonable price. You do not want to running back and forth too often to the suppply place with todays gas prices.

Rent or borrow nail guns. (somebody already mentioned this)

Consider the weather. If you buy the materials and can't get to the project until it's decent out, then you need to protect the materials from the elements.

Have a plan, write things down as they pop into your head, stay organized, plan 2 or 3 steps ahead so that you don't forget something or make mistakes. Mistakes cost money and time.

If you have help, let everyone know what your thinking. Communicate.

I can't tell how helpful it is to have someone cutting while your assembling but they have to know what the plan is.

Sounds like you have put some thought into your project already and I've said enough.

In the end, you have to do what fits your time and budget. I hope I didn't offend you. I'm no expert, I've just done this too many times and have learned from my mistakes.

Oh yeah, if you do decide to build your own, take pictures. It's great to have PICS of friends helping out with projects like this. Let us know how you made out Carol and share your picks here at WC.

My $2.00 worth of advice (inflation)

Sincerely,

Ray

Re: Sheds: Build, Buy, Plastic, etc...

#20

Re: Shed tips - these are good ones

Ray Carson, Lawrenceville, NJ

>I had a neighbor once who liked to keep all his snow tires behind his shed. There was a chain link fence separating the shed and my yard. In the fall, the wind would blow all the leaves behind the shed and around the tires. Guess what happened....

Mice and rats took up residence in this mess. Mosquitos came in the summer. I hated my neighbor for it.

So...I put up a 6 foot stockade fence in place of the chain link. During the removal and installation of the fence my neighbor just looked at me, standing there wondering what he did to deserve my WALL.

I had no choice but to move his crap from behind his shed onto his pristeen lawn so that I could install the fence. He was really ticked off. We didn't speak at all until the day he moved out to a retirement village.

People are a strange animal. I myself is one. :-)

Ray

Re: Sheds: Build, Buy, Plastic, etc...

#21

Re: Sheds: Build, Buy, Plastic, etc...

John Weber

>Thanks guys! Great Advice.

I think I steer away from Plastic

I've check codes, I can go up to 200 sq ft without a permit, oversets are 3' so should be good to go. The way our lot is laid out, they said I code basically build a pole barn in my back yard (with a permit of course).

I'm on a corner, and both my direct neighbors have sheds, so sort of a shed neighborhood. Our home is 108 years old, and the detached garage (that is stucco and T-111 sided) should be match nicely. The shed will sit in the back corner of the lot, so more or less out of the way. Location would be difficult to deliver a fully assembled shed, but walls, roof could be brought in easy enough.

I like the idea of building it myself, but time is tough, so I'm going to see if i can fine a quality assembled on site contactor and see what they can do.

Thanks again, and keep the ideas coming.

John

Re: Sheds: Build, Buy, Plastic, etc...

#22

Don't rule out ready-made...

John E in SC

>just because your site is tight. If you can get a pickup truck anywhere close, you could get a building delivered. We used to deliver anything up to 12' wide on a trailer attached to a pickup, and you can even slide the buildings a fair way. We delivered buildings to some VERY tight spaces in the past. Still might be worth checking into.

John

Re: Sheds: Build, Buy, Plastic, etc...

#23

Thanks Curly,

Parisian, VL

>I think I saw those numbers in ENR a while back. I recently spent several weeks on a project at the Port of Houston, and you should see the piles of pylons, generators and propellers/wings (or whatever they are called) stacked waiting for transit to West Texas. There were regular convoys of special permit load trucks heading out of The Port several times a week. Not bad to be around out on the open Interstate, but you didn't want to be on the road with them in the congestion of Houston.

The sight of the wind farms out North and West of San Antonio is really something. The first ones I saw were all along ridges very visible from I-10. Last year we saw lots more up around Big Spring (North West of San Angelo). There is a real construction boom going on with them out there.

Regards

Victor in Houston

Re: Sheds: Build, Buy, Plastic, etc...

#24

Re: IOWA leads in wind power by a big margin

Al Stokka - Cambridge, Iowa

>Curly,

Two points, 1) You should probably read the report itself, rather than a newspaper synopsis of the report, and 2) State ranking depends on the parameter.

Iowa does indeed lead the United States in electric energy produced from wind power as a percentage of total electric production (a better indication of a State's commitment to wind energy than megawatt capacity), followed by Minnesota, New Mexico, Oregon, South Dakota. Texas isn't in the top five.

Al

Re: Sheds: Build, Buy, Plastic, etc...

#25

Sorry John, I called you by the wrong name

Ray Carson, Lawrenceville, NJ

>In one of my responses I called you Carol. Sorry.

Good luck with your shed.

Ray