Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Did dealer sell me a USED jointer?!?

Posts

Re: Did dealer sell me a USED jointer?!?

#26

low life

John K Jordan

>>...they have a lot of tools that people buy and use

>for the job at hand and then return it for a full refund.

Sad but true. I'm sure these people are in the minority, but it sure seems at times that morals are in short supply.

I bought a sprayer once from HD to apply sealer to a deck. Opened it at home to find the nozzle clogged and the tank discolored from deck stain. Someone returned it after his job was done. HD must be the cheapest rental store around for some of these low-lifes.

There was a discussion on a photography forum once about using a bank fairly expensive fluorescent bulbs for studio photography. The person asking the question had an important photo shoot coming up. The advice was to buy the lights then return them when the shoot was over. One said he does it often, buying from a different store each time.

I believe these people will eventually have to answer for their actions.

JKJ

Re: Did dealer sell me a USED jointer?!?

#27

Re: Another Perspective on "used"

Jim Shaver Oakville, Ontario

>Hi Bob,

I wasn't aware that you were in the woodworking retail business, do you have a web site?

Thanks,

Jim

Re: Did dealer sell me a USED jointer?!?

#28

One would hope, John.

Gary Evans Tallassee, TN

>

Re: Did dealer sell me a USED jointer?!?

#29

In a past life I worked for Radio Shack

Dustmaker Mike

>and we had folks all the time buying CBs and Radar detectors from one store move across country and return them. When we sold one we all took bets as to what state it would be returned in. It has been happening for years.

Re: Did dealer sell me a USED jointer?!?

#30

Re: Another Perspective on "used"

albertabob

>Hello Jim:

I did not make the connection vs woodworking machinery and tools until you brought it up.

I thought I was adressing the difficulties at the consumer level with validating the machinery offered for sale both before it goes to the customer and after it has been returned as not suitable etc.

The same guy that orders and returns a tablesaw as not according to order will also return a coffee pot for the same reason. If packing and or other parts are missing the product becomes unsaleable and goes off to refurbishing or in the dumpster depending on the cost of transportation and labor.

That ends up on the selling prices of all conusmer products.

My comment spoke to the problem and gave a reason why boxes are opened and tools run up in my business before shipping them out to our customers.

Regards

Bob

Re: Did dealer sell me a USED jointer?!?

#31

Re: Another Perspective on "used"

Jim Shaver Oakville, Ontario

>I guess I READ your words and assumed you were speaking of woodworking machines, I was focused on the topic and thought that your comments were the same, I did not realize your business is non woodworking.....

Jim

Re: Did dealer sell me a USED jointer?!?

#32

Re: Did dealer sell me a USED jointer?!?

Alex

>What is meant by the expression "used"?

Does it mean; the machine has been out of the box?

Or does it mean; the machine has been out of the box and has been used where it was mede for?

As a seller of tools we often take machines out of the box to show them/standing in the window/at an exhibition.

We never use the machine even when it is out of the box.

So the question is not- like it is described in the question- has the package been changed, but did I notice prove of usage by dull blades, dust in specific parts of the machine, wear out traces of use on the surface. A good question would have answered the problem on itself. (excuse my bad English)

Re: Did dealer sell me a USED jointer?!?

#33

Ellis Walentine

Definitions vs importance

Ellis Walentine

>Machinery is built to be used and used and used -- for decades, often with hardly any maintenance at all. Jointers are among the simplest and most bulletproof machines you can get. So, I'm not sure where you're heading with your question. I wouldn't be concerned that the machine has depreciated in value because a few boards were jointed on it. This might have been a sign of the dealer's thoroughness -- that he tests each machine before it leaves his warehouse. As long as there is no evidence of damage or serious wear, I wouldn't worry; but I'd definitely ask for an explanation of the evidence of usage, in a nice way. If the dealer is on the level, he should be happy to discuss the situation candidly. I'd also make sure the new-product warranty is still in force.

I hope I caught your drift correctly.

Cheers, and congrats on your new (or slightly-used :) machine,

Ellis Walentine, Host

Re: Did dealer sell me a USED jointer?!?

#34

Re: Did dealer sell me a USED jointer?!?

RDS

>I am curious as to what the dealer said when you returned the jointer. It is appalling that they would try to cover up the fact it is used, but then I guess they must be following the lead of our leaders in DC.

Re: Did dealer sell me a USED jointer?!?

#35

Re: Definitions vs importance

Rob Stokes in North Vancouver

>My absolute favourite woodworking store made a point of taking each and every piece of WW machinery out of the box, assembling it, setting it up, testing it and only then did it go up for sale (still assembled).

I'd imagine if they sold product that needed to be shipped (they didn't), that product, after testing, would be taken apart, re-packed and sent to the buyer. And when the buyer opened the package - there would be wood chips and sawdust included.

You *may* have a case for a new set of knives, or at least a coupon to have yours sharpened. But other than that, enjoy your new machine.

Rob

Re: Did dealer sell me a USED jointer?!?

#36

Re: Did dealer sell me a USED jointer?!?

Dave Maciel

>Woodcraft does a lot of demostrations in their stores with some of the equipment they sell. I was willing to purchase a 10" Deta Unisaw

that was used for this purpose. I checked out the saw, it was in perfect shape except for some saw dust and it was fully assembled and ready to go. BUT they talked me into one shipped directly to my house.

Delta paid the shipping and I got the damaged goods which they sent me the new parts to fix at their expense. I still would have taken the demo because it was assenbled and tested.

Dave