Boy, it's been a long time…
Rod Peterson -- Ormond Beach
>Back in the day I used to be very familiar with WWV (the time/frequency standard broadcast by the National Institute of Standards and Technology—NIST) at 2.5, 5, 10, 15, and 20 MHz. Ham radio receivers in the '60s (and before), '70s, and even now, in some cases, needed help with their calibration (i.e. how closely the number on the dial related to the actual frequency one was listening on—important, because that information was crucial to ensuring your transmitter didn't emit a signal outside the allocated frequency band). There are several ways to make use of the WWV signal, which I won't bore you with here.
However, as long as we're calibrating our receiver, might as well get a time hack, too. I don't know whether I got my accurate time obsession from ham radio or whether I've always had it, but I've been tuning in to WWV (and the Canadian CHU before it was discontinued) for just about as long as I can remember.
That pause around 30 seconds is actually a missing tick at 29 seconds. There some other anomalies (they actually have a purpose), such as no ticks from about 45 to 56 seconds, sort a double hitch beep for seconds 9-11, and other things I don't know about. There's actually day/date information coded with tones, as well. Principally, however, we used the time hack at the top of the minute and the frequency we were listening on for our purposes.
I came close to building a WWVB (the LF transmitter) receiver from an article in a magazine in the '70s. The advantages were that it would decode all of the time date information carried on that signal and display it on a digital readout. I love digital readouts (with certain exceptions, such as tuning something for peak or null—analog is the only way to go, there), so this fascinated me. I never got around to it, but that type of gadget is the forerunner of all those atomic clocks (and even watches) we see today. I bought one of mine at Tuesday Morning for $15 a couple of months ago. The one in the magazine would have cost me ten times that in 1980 dollars.
Modern receivers still have WWV capability, but it's mostly used to verify that the crystal based phase lock loop oscillator is still practically dead on like when it came from the factory. Not to establish the calibration like the old days.
By the way, probably the most oft asked question in time related matters is, “what does UTC stand for?” (since the NIST announces the time as “Coordinated Universal Time”). Blame it on the French. Most sources cite that it is the abbreviation for Universel Temps Coordonné, supposedly the French words for Coordinated Universal Time. Unfortunately, any French-English translation I've been able to find says that those words translate to Universal Coordinated Time. Where the NIST folks came up with Coordinated Universal Time for UTC is beyond me.
Rod