Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

joining boards

Posts

Re: joining boards

#26

Re: The final answer..Hi-jack?

Barry Irby

>Clint, I like this idea. I can visualize a jig that would make this fast and easy.

A question. I have two large pieces of burl that would make a great table top. They are natural edge semi-circular shape with one long straight edge. I want to join them and have been thinking about using a sort of lazy "s" for a join, to avoid the straight glue line. Would this technique work for that? Or would the slight difference in the two radius' leave parts of the joint open? I guess I could experiment on some MDF. The joint would be abut 3 1/2 or 4' long.

Re: joining boards

#27

Re: The final answer..Hi-jack?

Clint Searl, at the base of Haycock Mtn

>Barry, I've only done it on a straight join, but I think if the curve were gentle enough, it would be O.K. Or try it with a 1/8" bit. Good luck,

Clint

Re: joining boards

#28

Re: The final answer..Hi-jack?

Carol - now in NC Nebraska

>What you want to do, Barry, is called complimentary template routing. I go into detail in my book. All you need is a 1/4" spiral bit and a 3/4" OD bearing. You will also need a flush trim bit. You probably already have one of those. Some MDF for the templates and there ya go! Its not hard but you do need your head screwed on tight. It is easy to get the pieces mixed up.

Let me know if I can help. There really is a nice write-up in the book with great pictures.

OK, why the 1/8" diameter bit won't work. First, too flimsy and it will snap. It has to cut the entire thickness of the material into two pieces in one pass to work.

Another reason is that each curve, no matter how gentle, has its own radius. If you routed an arc through a piece of material and then tried to match the piece and its fall-off together, you would find that the radius of one arc is 1/4" (the diameter of the bit) that the other. Two dissimilar radi won't mate together nicely. Big gap!

Re: joining boards

#29

Re: The final answer..Hi-jack?

Barry Irby

>I hate to admit it, but I don't have your book. Could you tell me the name and where I can get one? Maybe throw in that number (ISBN?).

Thanks for answering the question. I was nearly positive it would not work to just cut a curve and run the router through both pieces. And it seemed to me that the larger the bit was the less well the two pieces would fit each other. And I had no faith in the 1/8" bit.

Re: joining boards

#30

Re: The final answer..Hi-jack?

Carol - now in NC Nebraska

>Router Joinery Workshop

Lark Books

Sterling Publishing

Carol Reed

Don't know the ISBN off the top of my head, but the above will get you what you need.

Lottsa good stuff in there, Barry.

Re: joining boards

#31

Re: The final answer..Hi-jack?

Barry Irby

>Thanks Carol, I will hunt one down.

Re: joining boards

#32

Re: You might be surprised Jesse

Larry Clinton At Frankfort (Central)., Indiana

>The backlight method for truing up squares is very accurate as I said before. A .0001 gap will show up as a pretty big light leak. I have used this method in our instrument calibration lab when I was a working Engineer. Used in conjunction with a "round granite square" on a laser calibrated surface plate, a light would show up errors in master squares that we couldn't measure on our CMM (computer controlled coordinate measuring machine) (accurate to around .00001).

Re: joining boards

#33

Re: The final answer..Hi-jack?

Joseph Mulherin, Sr.

>Barry, just type in the title of the book into your Google and up will come the page and book you are seeking.