Can you imagine..
Dan Donaldson
>Trying to build one of those core memory boards for a mainframe? Whew, I know that I would be shaking like a leaf and blind by the time I got done.
Knowledge You Can Build On — Est. 1998
Can you imagine..
Dan Donaldson
>Trying to build one of those core memory boards for a mainframe? Whew, I know that I would be shaking like a leaf and blind by the time I got done.
I have one (actually three)
Dan Donaldson
>Two made by Pickett, one 6" long, and one 10" log log) + a round one.
I still think that there is no better way to teach logarithms than with a slipstick.
Re: ATTN: Geeks, Nerds and Engineers
Gary Camp, Bend, Oregon
>I still have my old 25 no batteries that work, a 15C that I used a lot (it is misplaced somewhere in our moving, but will turn up) and 48G I can't stnad an equals sign. math classes a couple of years ago were a REAL CHALLANGE though. Everything geared to to TI-83 Com. College level instructors weren't even sure how they were going to grade me in some of the classes. They just couldn't understnad RPN and thought the TI's were better even when I could get the answers faster. Plus it had a clock
glc
core memory -
John K Jordan
>>...[imagine] Trying to build one of those core memory boards
An old (ha!) friend told me he once toured a factory. One huge room was full of people, all women, sitting at benches with big magnifiers, threading tiny donuts into onto copper wire matrices.
I took a picture of the memory board in my collection, below. This is 4K bits (not megabits, and not even 4K "words". It took 12 of these boards to make up one PDP-8 12-bit word.
Best I can measure without disassembling, each donut is about 0.075" (1.9mm) in diameter.
The most interesting "calculator" I once had used a magnetostrictive acoustic delay line memory. The calculator was far bigger than today's desktop computers and used nixie tubes for display. It stored information in sound waves continually propagated down a long, spiral tube. A piezo crystal transducer on each end created and sensed the wave pulse train. Acoustic waves arriving on the tail end were amplified and fed back into the head end to refresh. I suspect this calculator cost many 10s of thousands of dollars when new - I bought it at a government auction for almost nothing, just for fun.
JKJ
Now THAT pic is cool..
Jason Roehl in Lafayette, IN
>
HP Discontinued RPN Calcs?!!
Dominic Greco in Richboro PA
>Holy Moly! I didn't know that! How could they just STOP making them? I thought they were a staple of the Engineering world. I'm probably showing my age when I say that I can't remember seeing an engineer with out one (it used to be slide rules).
I actually had several of these as well. I have the 48GX at work and I have a HP28S that I use at home. I used to one of the non-programmable ones laying about. But it was borrowed and never given back.
Dominic
Not exactly...
ScottS
>HP hasn't exactly discontinued RPN calculators... they're just making them harder to find.
While I haven't done thorough research, it seems like the majority of their current calculators now operate in a traditional "algebraic" input mode. On some, there is an option to switch to RPN input. I'm assuming that means the equal key (or some other?) becomes the equivalent of the RPN 'Enter' key. I believe that the HP-35S and HP-12C are the only calculators which still sport a "traditional" double-wide Enter key.