Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

ATTN: Geeks, Nerds and Engineers *LINK*

Posts

ATTN: Geeks, Nerds and Engineers *LINK*

#1

Jason Roehl in Lafayette, IN

ATTN: Geeks, Nerds and Engineers *LINK*

Jason Roehl in Lafayette, IN

>I just thought I'd share this cool site I found. It's amazing what can distract you when you sit down to work on your taxes. My HP 42S RPN Scientific calculator needed batteries, so I couldn't start right away, but while my wife was running errands (including getting batteries), I was sitting at the computer with the 42S sitting next to me... It turns out there are some real aficionados (to put it politely) of these old HP calculators. I'm not that way personally. If you want mine, you can come get it...from my cold, dead fingers...

I was just disappointed that I couldn't find an emulator I could upload to my Nokia N80 phone (Series 60, runs Java, in case anyone is bored). I suppose I could look into compiling the C source code into Java, but dang, it's been a long time since I've done anything remotely like that, and I'm sure there would have to be some modifications for usability with the phone's keypad.

Jason


Museum of HP Calculators

Re: ATTN: Geeks, Nerds and Engineers *LINK*

#2

I'm all three!

Tony - Memphis

>I was never able to afford an HP though.

But, we are working on writing Java code for phones in my area (we use them as data transfer devices, not for talking - our SIMS are only good for GPRS). I'm not a Java guy, but I am good buddies with a guy down the row here that is writing all sorts of stuff. He just figured out how to look for Bluetooth devices and connect to the one you pick (not through the menu, but via his own code). That's all I can sya, the rest is top secret.

I'm more a VB.net kind of guy, so I can write code for any Windows Mobile device (some phones are Mobile devices, but they are expensive).

I'm going to get him to write me a board feet calculator for my phone!

That reminds me, I just finished a .Net version of my Cove Cutter program that I need to make available for downloading. I've not released anything with .Net yet, so I need to figure out what all needs to be included. Probably will ZIP it into one file. The new version allows tilting the blade. That took some noodling. I still haven't verified the results yet, but they look pretty close to everything else I have looked at in print.

Tony

Re: ATTN: Geeks, Nerds and Engineers *LINK*

#3

Jason Roehl in Lafayette, IN

Affordability...

Jason Roehl in Lafayette, IN

>...might surprise you. I talked my folks into buying me mine sometime in my last two years of HS (went to a G/T academy my jr. and sr. years), so sometime in fall of '90 or '91, probably. The link listed mine (HP42S) with a street price of about $120, which seems to be about what I recall we paid for it. I used the heck out of the thing, and because of the RPN, blew everyone else out of the water during calculator-intense tests or homework. Mine's still in pretty good shape--a bit grungy and it has a dent in the bezel around the LCD (gotta love those days of lugging around 50-lb backpacks), but an excellent one can fetch over $220 on eBay now! They stopped making this model in 1995!

Jason

Re: ATTN: Geeks, Nerds and Engineers *LINK*

#4

Proud HP-45 owner

Mac in Indy

>I got through the first year (73-74) at Rose Hulman with a 4-function TI calculator and Log tables. Some of the guys were still using slide rules but very few. I wanted an hp-35! Right before my second year at Rose I went to the bookstore with my $325 to buy an HP-35. Prices had dropped $100 over the summer so my $325 would buy the HP-45 or I could get the 35 and pocket the $100. Getting the 45 was the best investment I made in my young life!

Thanks for the walk down memory lane Jason!

Mac

Re: ATTN: Geeks, Nerds and Engineers *LINK*

#5

Jason Roehl in Lafayette, IN

Wow...

Jason Roehl in Lafayette, IN

>...so are you still using that thing? I mean, for something other than a paper weight or doorstop? ;D

I may have to do some more searching...I think my dad still has an old desktop TI calculator on his desk at home, and I think he still uses it.

BTW, I downloaded the 42S emulator and the skins--now I can use it on my computer, too (with keypad functionality!).

Jason

Re: ATTN: Geeks, Nerds and Engineers *LINK*

#6

Re: ATTN: Geeks, Nerds and Engineers

John K Jordan

>Thanks for the link.

I still use a 28S but the machine I keep at hand is a 48S. The power of these little computers is amazing. I suspect that only 1x10^-3rd percent of the collective capability of these calculators was ever used.

BTW, playing with a programmable calculator was how I first got hooked on writing software back in the mid 70's. Using a TI with just 200 or so program steps and magnetic card storage, I'd write programs to flash the display, scroll characters, play games, etc. One day I read in Popular Mechanics about a new thing called a "microcomputer" that had **thousands**! of memory locations. Wow! (I understand this was the same magazine issue that spurred Bill Gates and Paul Allen into action.) About $10000 and a SWTPC 6800 computer kit later (plus a few years of self-instruction) I had an incredibly rewarding career in technical software development. Good clean fun!

JKJ

Re: ATTN: Geeks, Nerds and Engineers *LINK*

#7

Re: ATTN: Geeks, Nerds and Engineers

Scott Greaves in Blackfoot Idaho

>Thanks for the link, Jason! I have a 12C and a 15C that I have had since the early 80's, and they are both still working fine! I use one or the other of them at least every week. I think I've only changed batteries on the 15C once, and only twice on the 12C. I have always been a fan of RPN - I guess my brain liked working backwards! ;-)

My very first HP was a 21. It is still around somewhere, but it has a dead battery, completely dead, but until then it worked great! It helped me get through some gnarly accounting courses in college, and that WAS a million years ago!

Thanks for reminding me that some things are made to last!

Scott.

Re: ATTN: Geeks, Nerds and Engineers *LINK*

#8

And to think......

Mark Goodall - ATL - tooljunkie

>... at that same time I was playing with Lego and wondering what the life will be like after Kindergarden and had to go to school for full days in Grade 1.

Amd they still make my Lego even today.

Happy Woodworking!

Re: ATTN: Geeks, Nerds and Engineers *LINK*

#9

Jason Roehl in Lafayette, IN

Slight hijack...

Jason Roehl in Lafayette, IN

>...did you see the news item that Legos just turned 50 a couple weeks ago?

Jason

Re: ATTN: Geeks, Nerds and Engineers *LINK*

#10

Till about 10 years ago!

Mac in Indy

>The batteries died ages ago and then the wall plug adapter quit working. I didn't use it all that much when it quit so I have it stored away at home in a to keep box somewhere.

Actually I'd rather play with the Lego's Mark mentions below than mess with calculations these days!

Mac

Re: ATTN: Geeks, Nerds and Engineers *LINK*

#11

Re: ATTN: Geeks, Nerds and Engineers

Jerry Nicholson

>Geeks, Nerds, Engineers?? GUILTY!

I had an HP35, HP45 and HP55. I had one of the first if not the first HP35 in Wichita Kansas, delivered directly to me by a HP tech rep from Kansas City.

I current have and use an HP11C, HP32SII, HP33S, and HP50g. "=" Key? Real geeks don't need no stinkin' = key!

Jerry

Re: ATTN: Geeks, Nerds and Engineers *LINK*

#12

You keep making me feel old!

Mac in Indy

>Jason........ I played with Lincoln logs when I was 4-5 years old but my Grandma or Aunt got me some Lego, a relatively new product at the time, and I never looked back! I loved my Lego but so did the adults. That would have been about 1961 or so. I still buy Lego for my 18 year old son every Christmas.

Mac (feeling very old because of this thread)

Re: ATTN: Geeks, Nerds and Engineers *LINK*

#13

Re: ATTN: Geeks, Nerds and Engineers

Randy Johnson Connersville, IN

>Dad was a hardcore HP devotee.

After he retired he got one that was so complicated even he had a hard time figuring it out. When he passed away 11 years ago it went to a brainy cousin with a EE.

I still have the one he used the last years he worked, a 34C but it resides in the case. It exceeds my need for a calculator a couple hundredfold.

Re: ATTN: Geeks, Nerds and Engineers *LINK*

#14

Jason Roehl in Lafayette, IN

Found it... *LINK*

Jason Roehl in Lafayette, IN

>a pic and info page about the TI my dad has (had?). I remember playing around with it as a kid thinking it was about the coolest thing on Earth.

BTW, since I posted a similar thread on another site, I was told of a site dedicated to the repair of HP calculators: www.fixthatcalc.com It looks like you could get that 45 working like new for less than $100. I'm sure I'll be buying my two boys LEGOs for a long time to come...

Jason


TI 4000

Re: ATTN: Geeks, Nerds and Engineers *LINK*

#15

Re: ATTN: Geeks, Nerds and Engineers

Chad Pearson

>My 19B HP still sits next to me here at work. I purchased it in the fall of 1988. It's still going strong. The most memorable part was going through a great instruction manual to make sure I understood how it worked. I learned more doing that than I did in my Financial Managment classes.

Re: ATTN: Geeks, Nerds and Engineers *LINK*

#16

Re: Found it... *LINK*

Ken Garlock, Collin County Texas

>Below is a link that talks about the first true pocket calculator from 1967.

Things surely have changed,

Ken


First TI calculator

Re: ATTN: Geeks, Nerds and Engineers *LINK*

#17

Just bought a NEW one...

ScottS

>My parents gave me an HP 10C calculator when I was in high school. I must have used it for 20 years before it finally died. After I started programming computers, I always wanted an HP 16C but could never justify the cost...

I recently went back to school and had the need for a decent calculator again. Tried to make due with a garden variety TI, but couldn't really get used to the algebraic input method after using RPN for so many years. I was surprised to find that HP had discontinued most of their RPN models! Looks like the business-oriented 12C and the 35S are the only models that still use RPN as the default input method and include a large 'Enter' key. After looking at prices on eBay, I promptly bought a 35S for the "bargain" price of $60. Ouch! The keys aren't quite the same as my old 10C and all of the buttons are in different places, but it's a heck of a nice calculator for those that can't live without RPN!

Re: ATTN: Geeks, Nerds and Engineers *LINK*

#18

Re: Proud HP-45 owner

Glenn Madsen

>I was in the market at pretty much the same time Fall '73. But I was an Econ/Finance geek, and bought a 32C, IIRC. $400 cash, a whole month's salary at the time as a security guard at night in Oakland, CA. Best investment I made that year, after I got married.

I bought a 12C when I went back for a much maligned MBA some years later. 25 years later, I still carry one of those, and so does my wife.

Very cool calculators!

Re: ATTN: Geeks, Nerds and Engineers *LINK*

#19

Re: Proud HP-45 owner

Dan Donaldson

>I still have my 45. One of the originals in the leather case;-) I had a 25, don't remember what happened to that one, but I also have a 15C that I still use as my calculator when I need one.

Re: ATTN: Geeks, Nerds and Engineers *LINK*

#20

Re: ATTN: Geeks, Nerds and Engineers

Dan Donaldson

>Remember the old IMSAI and ALTAIR boxes? I built one of those way back when. Still rmember the whole manual was a set of the old smelly blue copies telling you which tracks you had to cut and jump to make it work after you soldered all the parts on the board.

Also got to play with a PDP-8. Real horsepower ;-)

Re: ATTN: Geeks, Nerds and Engineers *LINK*

#21

Re: ATTN: Geeks, Nerds and Engineers

John McGaw

>Sadly I sold my HP-35 when I bought my HP-41CV (money was tighter back when I was in the AF) but the 41 still sits right next to my computer monitor and gets used all the time. It has the time, stat 1, X functions, and math 1 modules and somewhere in the packed stuff in the basement is the printer and at least two other modules including games. That doesn't mean that the Virtual HP-41CX (Furlow's) program on my computer doesn't get used occasionally.

It seems funny that I never seem to use my much more powerful HP-28C any more and it sits in a cubby on my desk and collects dust.

Re: ATTN: Geeks, Nerds and Engineers *LINK*

#22

Re: What?! No retro-encabulator??

Jim Toews - Walla Walla, WA------WebKitFormBoundar

>

Re: ATTN: Geeks, Nerds and Engineers *LINK*

#23

HP-48GX

JoeW in Detroit, MI

>First HP calculator. Took awhile to get used to the RPN, but it seems rather intuitive now. Got me through differential equations. Having trouble using in a statistics class at the moment, have to borrow my daughter's TI-84. HP missed the boat when they didn't push their handhelds like TI. Too bad.

Re: ATTN: Geeks, Nerds and Engineers *LINK*

#24

Re: Proud HP-45 owner

Glenn Madsen, near San Francisco

>Got to thinking about it. The original was a 38E...

Re: ATTN: Geeks, Nerds and Engineers *LINK*

#25

PDP-8

John K Jordan

>>...Also got to play with a PDP-8. Real horsepower ;-)

In my computer museum I have a memory board from a PDP-8. It is core memory - thousands of tiny ferrite beads threaded by hand onto a wire matrix. It a whole 4096 bits.

I also have an 8k static memory board for an SS-50 bus; 1434 solder connections on the back, $250 for the kit which included sockets for the chips.

JKJ