Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

OT- Levis Quality

Posts

OT- Levis Quality

#1

OT- Levis Quality

Rick Jackson,TN

>Is it just me or is the quality of my favorite pair of pants continuing to decline like most things produced off-shore? I have a habit of pulling up my jeans by the belt loops, something i have sone for so ling I can't even remember. Until the past few months, this hasn't been an issue but lately, I have torn the belt loop stitching from the jeans. The stitching is on the loop but a hole is where it was. The master seamstress in the house can repair them but that's not the point. Has happened on two pair now. By the way, they were made in Lestoho (sp) which I had to look up to find out it is in South Africa - rant off

Re: OT- Levis Quality

#2

Faded Glory . . .

steve mackay

>Made in USA, tougher than Levis ( Now-a-days ! ). Get " origanal fit " so you're not Gangsta. Well, unless you're down with that. Have'nt bought Levis since they pulled out of the country. And don't miss 'em.

Re: OT- Levis Quality

#3

Re: Faded Glory . . .

Rick Jackson,TN

>Thanks Steve will have to give them a try and at 59 yrs old I think I'll pass on the gangsta loo, that's why I broke the belt loops I keep the pants up over my a$$

Re: OT- Levis Quality

#4

Re: OT- Levis Quality

Jon Grider

>Yeah,The quality has gone south like their manufacturing plants.I've been wearing Levi's for 45+ years w/o problems until they left our borders.Maybe my wallet gets too big and jam packed with papers and stuff[certainly not money] but the area on the jeans where the rear pockets are bar tacked has failed on the last few pairs I owned long before the rest of the jeans were worn out.I emailed them and they did send me a free pair of Honduras made jeans.

Re: OT- Levis Quality

#5

Re: Faded Glory . . .

Larry Clinton At Frankfort (Central)., Indiana

>I have been buying the Faded Glory jeans at Wally world. However, I went in a couple weeks ago and all but one pair in my size was made in Foreign countries. If I don't find them made in the USA, I will start buying my jeans over the internet from USA manufactures. I have already searched and found 2 or 3 places on the net. Whenever possible I purchase American made (US or Canada). Don't care if they cost a little more -up to 50% more - I will buy American.

Re: OT- Levis Quality

#6

Re: Faded Glory . . .

Larry in NW Ohio

>Larry I to have been doing the same thing. The only ones I have found so far made in the USAmare "SKILLERS" and " BILLS KHAKIS" and get them mostly off Ebay. Would you like to tell which ones you have found made in the Homeland and where they are. Thank You. Larry in Ohio

Re: OT- Levis Quality

#7

Re: Faded Glory . . .

Larry Clinton At Frankfort (Central)., Indiana

>I have just searched using Google. The following sites are what I have seen - I have looked at most of them before. The Texas jeans have a pretty good sale going on right now - I may buy a couple pair and see how I like them.

http://www.texasjean.com/

http://www.allamericanclothing.com/denim.php

http://www.gussetclothing.com/mendiamgusje.html

http://www.pointerbrand.com/

http://www.buddysjeans.com/

http://www.patriotmade.com/catalog/index.php

Re: OT- Levis Quality

#8

GGLiddy . . .

steve mackay

>was lauding something like " Gusset " ( ? ) jeans. Don't know the price tag though. Thing is I consider jeans " expendable " so the less costly ( and made in USA ) the better.

Re: OT- Levis Quality

#9

Re: OT- Levis Quality

Nelson

>Yeah you need American made jeans when you are working on your made in China tools.

Re: OT- Levis Quality

#10

Mexico

Bill Hammond, Oregon Coast

>I have found that of the off-shore made Levis the Made in Mexico seem to be the better made of the lot. Buying them it's at least keeping things closer to home.

Bill,

gotta have my 501s, can't forget to zip those up!

Re: OT- Levis Quality

#11

Re: OT- Levis Quality

Virgil Johnson, Versailles KY

>I stopped buying Levis last year. I could not buy 2 pairs that fit the same even though they were supposed to be the same size. Dickies, Wrangler fit better and are half the price of Levis. They are all made in some country that I would have trouble finding on a globe.

Re: OT- Levis Quality

#12

Switch to Carhart!

Craig Daymon

>I noticed this about 10+ years ago. I think first they had an "orange"tag that was different from the traditional in that they were made outside the U.S. The red tags were still available. Then they all went to red tags without any way to discern where they were made. (Probably because most, if not all were no longer made in the U.S.)

If they've gone farther downhill, that is really sad. So much for another U.S. tradition.

I switched to Carhart's jeans. They're well made and usually cheaper than Levi's.

-Craig

Re: OT- Levis Quality

#13

Re: Switch to Carhart!

bob marino

>Craig,

Aren't Carhart's made outside the USA? IIRC, when I went to buy a pair, I looked and they were not made here. Maybe, I am wrong.

Bob

Re: OT- Levis Quality

#14

Re: Faded Glory . . .

bob marino

>Thanks for those links. It's nice to see and support something of quality still made in this country. When I take a look at the LL Bean catalog, out of the several hundred items listed, not much more than a handful are made here. Even Filson is going offshore with some stuff!

Bob

Re: OT- Levis Quality

#15

Re: Switch to Carhart!

Andy Lincoln in Dearborn MI

>Bob,

You are correct most all of Carhartt's clothing is now assembled/stitched in China using American-made fabrics.

Andy

Re: OT- Levis Quality

#16

Re: Switch to Carhart!

bob marino

>Damn shame!

Bob

Re: OT- Levis Quality

#17

Re: Switch to Carhart!

Craig Daymon

>My concern was quality. Carhart makes a good pair of jeans. Besides, with the jeans that are "made in the U.S.A.", what is the percentage of legitimate U.S. citizens actually working on the factory floor? Sorry, just my opinion.

Re: OT- Levis Quality

#18

LL Bean *LINK*

Phil Joines Krum, Tx

>I don't think there any jeans made in the USA now. Can't compete with the prices.

We started wearing LL Bean jeans about 10 years ago. They last 4 or 5 times longer than any I've had since the 70's and at least twice the old time Levi's. If you don't like them send 'em back for a full refund.


Bean's jeans

Re: OT- Levis Quality

#19

Re: LL Bean

Mike Huber

>Now,

If they only came in men's sizes for us full figured men.

Mike

Re: OT- Levis Quality

#20

Website dedicated to American made *LINK*

Grant Smith

>Here's a website that outlines whast brands are made where. A suprising number of brands are still made here..


StillMadeinUSA

Re: OT- Levis Quality

#21

Re: GGLiddy . . .

Rick Jackson,TN

>Just in case you are interested...ain't Google great?

Men's Diamond Gusset Jeans

A superior difference in comfort and style!

We invented Diamond Gusset jeans in 1987. Our jeans were the first to incorporate a gusset in the crotch, and we were the first to introduce a Kevlar reinforced motorcycle jean with a gusset, the Defender. Looks like they are about $42

Re: OT- Levis Quality

#22

Tilley *LINK*

Rob Brophy...lost in Niagara

>Gotta admit I'm a fan of the LL Bean Double L classics since Levis faltered...but if you want long lasting, get Tilley. Most of their stuff is guaranteed for life and made in Canada...and they make the best damned hat ever. NFI but I have purchased a few things.


Tilley jeans

Re: OT- Levis Quality

#23

Re: Switch to Carhart!

Dave Avery - East Hampton, CT

>Uh Bob...... you sell German (Austrian ?) made tools :) Hope you are well. Dave.

Re: OT- Levis Quality

#24

Lucky Brand Jeans

Dave Avery - East Hampton, CT

>They cost $100 a pair, but they're made in the US...... I'll reserve comment on how many are willing to pay the price for these, or Northfield tools, or ........

Re: OT- Levis Quality

#25

Re: Switch to Carhart!

bob marino

>Dave,

Yes, sir. Sure do!

And it's kind of funny (in a sad way) that my introduction to Festool (and eventually becoming a Festool dealer) was at a ww show about 7 years ago. I was lamenting the fact that those German tools (from Fein and Festool) were way better, IMHO than their American made competition and wished that we produced better quality tools here in the USA. I believed that then, and believe that even more strongly now. Blame again, IMHO, on any number of factors - the unwillingness of many US tool manufacturers to look at the long term picture, instead of next quarter's profits, manufacturing to meet a price point rather than a quality point, the propensity of the average Joe to only buy tools at the lowest possible price, etc. It was a race to the bottom that the USA firms won. Festool's approach is exactly the opposite. So, I am glad/thrilled/proud to be selling those tools!

As regards what's left of American manufacturing, I try my best to seek them out and support it, whether it be buying an American made broom from Home Depot, a vacuum from Orek, or some clothing from Filson. I don't mind paying more for a quality made USA product. I only wish more people would too!

Bob