Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

greetings everyone

Posts

greetings everyone

#1

greetings everyone

Matt Zamora

>Hello all!!

I have a passion for wood working. Always have, just never had the means to act upon my ideas nor the finances.I'M a 33 yr old disabled war veteran . Since my forced seperation from the Navy ( i served 8 yrs) i have been battling with the aftermath of it all, and being 60% disabled now limits my future livlihood quite a bit. However it did not skew my passion i had since childhood, and that is woodworking. I keep a pad of paper next to my bed and usually i wake up to sketch out ideas for furniture and things. It's about the only thing that brings peace, clarity, and meaning to whats left. Finding a school or classes in my area ( Daytona beach , fl) has beenso far unsucessful. The cabinet shops i have contacted practically chased me out the door when i asked for apprenticeships/understudies. Honestly i just want to enrich my skills , have some fun, learn and be whole again. Anyone have some ideas of schools/classes / apprenticeships etc in the Deland,Sanford ,Daytona area , please bless me with it.

Very respectfully,

Matt Z.

P.s. sorry for the typos

Re: greetings everyone

#2

Re: greetings everyone

Ken Oakley-Sunny St. Cloud, Fla

>Wood Craft on Rte 436 near Red Bug Lake Rd in Casselberry has classes all the time. They could probably help you find some one who would be willing to mentor you and I am sure they know all the woodworking clubs from Daytona Beach to Tampa. They have a website.Just Google it.

Re: greetings everyone

#3

Re: greetings everyone

Al Stokka - Cambridge, Iowa

>Matt,

Did you ever get the seats for your Mini Cooper?

Al

Re: greetings everyone

#4

Thank you . . .

steve mackay

>for your service to our country ! I'm just an old crusty E-5 with only 30% but I can tell 'ya the path your considering CAN BE DONE ! Might not get rich and famous but with the bennies and pension/disablitity you can pay the mortgage and bills ! You have to want it bad though. Its easy to sit around and let the system take care of you ( however badly ). Sounds like that route isn't for you though. And THIS is the place to find out about all things wood, I assure you. You'll get more support than you can imagine. Are you still " in " or can you get out and about yet ?

Re: greetings everyone

#5

Re: greetings everyone

George@Colonel's Workshop-Havertown PA

>Hello Matt,

You received some pretty good advice. I admire your aspirations and enjoin you to keep plugging. You'll get there. Too bad you are so far away. You'd be welcome in my shop to learn anything I may have to offer. That would not take too long. :<) Good Luck.

George

Re: greetings everyone

#6

Re: greetings everyone

Larry in NW Ohio

>Matt I sent you an email, but like always I hade a royally big brain fart and forgot the most imortant thing. THANK YOU for you service and hang in there things are getting better for the vets. Larry in Ohio

Re: greetings everyone

#7

Re: greetings everyone

Barry Irby

>Matt, Thank you for your service.

Check with your local community college to see if they have anything that interests you. Might also check with Agricultural Extension service. (Doubtful, but maybe)

I just tried to check out the Woodworking Channel, and there is a notice that it will be back up and running Nov. 15. So you might try WWW.thewoodworkingchannel.com next week.

There are endless video's on You Tube.

And don't forget books and video's or DVD's.

Lots to be learned from any of these for anyone willing to work at it.

Check with Woodcraft for a local Turning or woodworking club.

Re: greetings everyone

#8

Re: greetings everyone

Jennifer@Indy.USA

>Matt,

First of all thank you for your unselfish service to all of us and our country. You are an amazing person for that. I am not familiar with the Daytona area in regards to available woodworking opportunities. I sure hope you can find a place locally that you can help you find your dream. Keep up the sketch book and design ideas. They are liberating and will help you find your way.

This community here at WoodCentral will also be a wonderful place for you to find the camaraderie that is a huge inspiration for all of us who have a passion for woodworking. Glad you found us.

Jen

Re: greetings everyone

#9

Re: greetings everyone

Larry Clinton At Frankfort (Central)., Indiana

>Matt - first Thank you for your service to our Country. I wish you were closer (but doubt you would enjoy the Indiana weather). I would gladly share my shop and what little knowledge I have. You will find this site to be a great resource - they are many here with a great deal of knowledge, (I'm not referring to myself) and I have found all are very unselfish in sharing their hard earned experience. Don't know much about the resources in Florida, visited there, but was mainly interested in fishing at the time. I wish you the best in your endeavor, I'm sure you will be successful.

Re: greetings everyone

#10

Matt, you can link to Woodcraft from this site....

Art Silva

>When you get there just click on stores and enter your zip code. Each store lists their school schedules with topics and costs.

DO NOT BE AFRAID TO ASK ANY QUESTIONS ON THIS SITE. YOU WILL BE SMOTHERED WITH ANSWERS.

Semper Fi! Art

Re: greetings everyone

#11

Re: greetings everyone

Matt Zamora

>Hello everyone and ty so much for your support and advice. I have never felt so welcome on a community board before. you people are awesome!!.

Hi Larry, im originally from indiana( born in FT Wayne , but grew up in the Huntington/Bippus area) Have alot of fam out there, know any Falk, Miller or Stoffel?.

Hi Al, im not quite sure about the mini cooper question, besides can't do much of a home depot run in that sucker , haha j/k.

To my fellow Vets and their loveones , god bless ya and thank you for the ones who emailed me. I will reply to you all soon. I use the library computer so time can be restrained sometimes.

Ironically i have checked major universities and the community colleges, most programs now are nursing ,Homeland Security, CAD ,Culinary arts and Cosmetics. but I will try the woodcraft link and see what classes are near.Castleberry isnt too far about an hour, but ive heard of alot of little hidden furniture shops in Sanford. Orange City which is just 4 miles south of me has abunch of antique and resale stores and i am always finding furniture that can be stripped and resurfaced. Problem is they know it too $$$haha.

Well right now, i have been building foutons for pets. I started off making one for my Walkerhound,Piper (american fox hound). Showed it to a couple of neighbors and boom , got three orders in already.I'll take a pic and upload it. its simple and cheap to make. who knows maybe this could be a lil business for me, for now at least.Heck i do it because its fun, not for money.

Anyhow , i will come back in soon and again ty.

Matt