Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Woodworking Calculators

Posts

Woodworking Calculators

#1

Woodworking Calculators

Ken Krawford

>I frequently find myself adding or subtracting fractions in my shop. You know the drill: 11 5/16 - 1 7/8 type calculations. Obviously anyone who passed elementary school math can solve these problems but I have seen woodworking calculators in the Borg and don't know if they would circumvent my math laziness.

Anyone use these? Like & dislikes? Brands?

Re: Woodworking Calculators

#2

Re: Woodworking Calculators

Robert Brandt

>I think they are GREAT! The BORG etc. may call them woodworking calculators, but there are other english system (feet/inches) calculators on the market.

Have I used one? No, it's something else to keep track of, but sometimes it may be quicker that doing a manual calc. When I get into strange fractions, I come back in here and use the computer!

FYI...old trick, adding or subtracting 3/8th's, 5/16th's etc, change the fractional part of all dimensions to the "largest." In the case above, convert 3/8 to 6/16 by multiplying bothe numerator and denominator by a number that makes the "8" a "16" - 2! Now you have 6/16 and 5/16.

Re: Woodworking Calculators

#3

This is my personal assistant..... *LINK*

Scott in Eastern Iowa

>....and my workhorse too! Its not a cheapy, but its very powerful...

http://www.calculated.com/prd16/Construction+Master+Pro-Desktop+.html

If this calculator isnt around I frequently refer to my decimal fraction chart and do it all in decimal. This goes back to my days of designing cut sheets for a fab shop I worked in.


Calculated Industries - Desktop

Re: Woodworking Calculators

#4

Re: Woodworking Calculators

Larry Marker

>I have one and like it. I keep it in the top of my tool box.

Mine is a Sharp Scientific Calculator model EL-531R. The fractional arithmetic part works very well and also does conversions. I suspect most work much the same way.

I don't like this one as a general scientific calculator -- the memory functions are rather obtuse and I can never remember how to use them. However, I use it just for the fractional arithmetic and it does that well.

Larry

Re: Woodworking Calculators

#5

Re: Woodworking Calculators

Larry in NW Ohio

>I`ve always done things in dicemials. I think it`s so much easier. I have conversions charts all over the shop. If you would like to try it and can`t find a chart I could send you one. Larry in Ohio

Re: Woodworking Calculators

#6

Re: Woodworking Calculators

Calvinin Irmo, SC

>I use the Sonin Model DT210. The ability to add and subtract fractions is simple and is a great tool for back-checking mental gymnastics. This little calculator also does roof calculations and has proven its value to me in those calculations as well. Have also used it in stair and step calculations, i. e. for estimating stringer lengths needed.

Re: Woodworking Calculators

#7

Re: Woodworking Calculators

Carol - now in NC Nebraska

>I'm a heretic. I use millimeters. The conversation is just too easy. All my tapes and rules have dual measurement. Just multiply or divide by 25.4 to go from one to another. I generally convert only once - at the beginning of the project.

Mathematical operations of fractions fracture my brain. I like whole numbers and no decimal points to lose track of. JMHO

Re: Woodworking Calculators

#8

Re: Woodworking Calculators

Verne in NJ

>I bought a Sears construction calculator. It was about $15 and I use it quite a bit - mostly to double check my head calculations. It does inches and fractions and that's about all I need out of it, so it has been worth it.

Re: Woodworking Calculators

#9

Re: Woodworking Calculators

ScottS

>A girlfriend of mine bought me one of Calculated Industries' fractional calculators as a birthday present 5-6 years ago. Since I did well in math, I thought it was a bit silly... but I ended up using it a LOT! When my housekeeper's dropped a book on top of it and broke the LCD, I promptly went out and replaced it! Second time around, I bought the cheapest one I could find. I never used any of the more advanced functions (e.g. how many yards of concrete do you need to cover a certain area, how many squares of shingles for the roof of your house). I also have an expensive HP calculator that will handle fractions, but the cheap-o from Calculated Industries is MUCH easier to use. It'll also convert backwards and forwards between fractions and decimals, convert feet to yards, etc. Very handy! Definitely recommended...

Re: Woodworking Calculators

#10

Don't need any calculator

Mark Goodall - ATL - tooljunkie

>Don't need a calculator. The formulas are simply enough:

Actual Cost = Estimated Cost * 2

Actual Time = Estimated Time * 4

Happy Woodworking!

Re: Woodworking Calculators

#11

Re: Woodworking Calculators *LINK*

John in Calgary

>I use one of the inchmate calculators, it has fraction buttons for easy entry (i.e. 1/2, 1/4, 1/8, 1/16, 1/32 and 1/64), plus inch/feet buttons so you can enter numbers in inches/feet/fractions. Being an engineer, I've tried to do the math in my head (I do it for the practice, but don't trust myself for multiple calculations on complicated pieces) and I've converted to decimal, but much prefer working directly in fractions (since that is what I'm going to measure with my tape or rule). There are definitely fewer mistakes when I use the calculator.

My only issue is I sometimes forget to press the inch button when I'm working with a whole number in a calculation and I get an error forcing me to start again (if you don't press the inch button, it doesn't know if your number is inches, feet, etc.).

John


Inchmate Calculator