Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Feeding dining room table

Posts

Feeding dining room table

#1

Feeding dining room table

David

>Hi All,

Any recommendations for the best "food" for an older (approximately 50 year old) teak dining room table? My mother has never waxed or oiled it and the top, which looks like 1/8" thick veneer, is beginning to craze. I'm not sure what the finish is but it's not a poly. I'm guessing it's alcohol soluble because of a telltale spot where it looks like someone dripped some wine.

I've always used things like lemon oil or wax to help old furniture, but my old furniture isn't as nice as my mother's...

Thanks,

DGW

Re: Feeding dining room table

#2

Re: Feeding dining room table *LINK*

Lee Schierer - McKean, PA

>I've seen some teak on boats that looked really good after they were restored with Teakguard. I have no idea how it might affect the glue under the veneer on your table or weather it is suitable for dining room table.

Lee


Teakguard

Re: Feeding dining room table

#3

Re: Feeding wood is an old wives tale.

henthorn

>Wood is dead and isn't going to eat. It is hydroscopic and will gain and lose moisture as the humidity changes. Protecting wood from oxidation and abrasion can be done in several ways. Washing with Murphy's soap or other cleaning agent and then waxing or renewing the surface with a fresh coat of the original finish often is a great help. Often a thin coat of a Danish type finish wiped on and then wiped off will refresh a finish. But really, you can't feed the wood. (G)