Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

OT - front load washer

Posts

OT - front load washer

#1

OT - front load washer

Steve Silca

>I am having a heck of a time figuring out my new GE front load washer. Does anyone have one? Specifically, the door seems to automatically lock and unlock several times. It hardly seems to put any water into the drum. Also, during a cycle, the machine will stop and I will have to hit the start button to get it going again. Finally, the thing won't rinse and spin. Very frustrating and I can't figure it out.

It might be related to the drain hose but I've double checked it. It's not kinked, and it doesn't go too far down the stand pipe which would create a syphon effect. Any ideas?

Re: OT - front load washer

#2

Re: OT - front load washer

John K Jordan

>Steve,

The new efficient front load washers use very little water compared to the old models, spray a little then tumble, etc. (This was pointed out in the manual that came with mine.) It should pause occasionally for a while, but not for long - did you wait? - did the lights on the front go out? Restarting may be messing with the cycle timing.

If it stops for good, and won't continue, something is wrong. Door switch?

Re: OT - front load washer

#3

Sounds normal to me

Mark Goodall - ATL - tooljunkie

>We recently got a pair of Whirlpool front loaders and to say they work differently is an understatement.

They are very high tech. Once you close the door and press start the computers take over and it does a whole lot of stuff. Much more than the old convenstional washers. First they lock to door, and will keep it locked until after the cycle when it's COMPLETELY free of water. THen it fills just a small amount of water (it's hard to imagin it can clean clothes is such little water, but it does). Then it spins one direction for a while, then chages direction for a while, and it continues to spray water, change direction, change speeds, and beep and chime the whole time.

The first week I keep on going back to see what was wrong when I heard it beep. Only to see that it's just doing it job.... a complicated one at that.

Happy Woodworking!

Re: OT - front load washer

#4

Makes me glad I did what I did…

Rod Peterson -- Ormond Beach

>…the first time I ran mine. I still get kidded about it (and probably will here, too). I sat on a five gallon bucket and watched the whole cycle. It was actually very interesting. Much as Mark says, the door locks, it spritzes some water in. It turns three or four times, stops, waits, turns three or four times in the opposite direction, stops, waits, does something else, etc. It does different things throughout the wash, the rinse, and the spin cycles. Toward the end (not at the end) it spools up for the spin-dry to a speed you will not believe possible. Then, it stops. But it's not done—it will tumble the clothes (one or two turns of the tub), first one direction, then after a pause, in the other direction, three or four times before it finally finishes and unlocks the door. It's really fascinating. It seems like it doesn't use as much as a gallon of water in any of the wet cycles.

This is not to say there's nothing wrong with yours—just that it's a whole lot different from how a top loader works. This isn't your mother's agitator washer.

Rod

Re: OT - front load washer

#5

Re: Makes me glad I did what I did�

Barry Irby

>It must take just a little more to entertain me than Rod. But not much.

I was so sure the door could not possibly seal and not leak, I laid mine on its back and now its a top loader, obviously they way it should have been. :)

Mine goes through all those gyrations too, and uses very little water, but I have never watched all the way through. I'm guessing it works as it should, my clothes seem to be clean. Mine is about five years old, and as I recall, there were some serious bolts under it that had to be removed. Are you sure you finished the setup?

If I were you, I would put a load in it, set it on a normal cycle and leave it along about twice as long as you think. See if the magic happens. Don't rush it. (I know its unmanly, but you might read the book.) If it's not working, call manufacturer.

Re: OT - front load washer

#6

Re: OT - front load washer

Pete Stahl

>I had a problem with my standard top load washer after putting in anti-burst hoses. Some how I guess they got a surge and did it's thing and wouldn't let water through anymore. Do you have these? Is the rinse cycle just cold water and maybe not on? Just a thought as I was baffled when it happened, thought the washer was broke.

Re: OT - front load washer

#7

Re: Sounds normal to me

Bri in Mtl

>Have the same washer. Only thing I don't like is the not being able to handle single large items. Due not being able to get the load balanced enough for the high spin you end up with a pretty wet finished load.

Other than that I like it quite a bit.

Been trying to figure out how to make a counter top for the pair.

Re: OT - front load washer

#8

Agreed

Nat Robison

>I had a bit of adjustment period with my front-loading set and like them a lot. One quirk with mine is that it will countdown to 2 minutes (during the final spin) and sometimes stay there for several minutes. The only thing I can figure is that the machine senses there is more water to be wrung out and stays there until it's satisfied. The last minute of the cycle is saved for the couple of tumbles that gets the clothes off the walls of the drum.

They also use far less water. While washing, the clothes are never in standing water.....they're just soaking wet.

Re: OT - front load washer

#9

Let us see what you come up with.

Don in Northern Arizona

>Bri,

My wife and I will probably purchase a front loading washer and dryer in the spring or summer to replace our 22 year old units. I was stunned by the price of the pedestals and the "optional laundry worksurface." It would add 500 bucks to the cost of the machines, and decided I will need to build both features. I will be very interested in seeing what you come up with for a counter top.

Don

Re: OT - front load washer

#10

2x4s and plywood

Mark Goodall - ATL - tooljunkie

>Yes, it amazed me too when I saw the price of the Whirlpool stand (what $150/ea or something) plus the $300 countertop.

I settled for the $19.99 stacking adapter: couple metal brackets, 4-6 screws and a $18 piece of doubleside tape.... yikes!

Many people I know use plywood and 2x4 to make a stand to raise it 12" off the ground, or a piece of plywood or laminate across the tops to make a work surface.

I agree $500 is alot to pay for these extras.

Happy Woodworking!

Re: OT - front load washer

#11

Anti-burst or anti-flood?

Mark Goodall - ATL - tooljunkie

>Are you talking about the anti-burst (steel braided hoses) or the anti-flood (has a device inside hose fitting to detect fast flow and shuts off automatically)? Pardon me if I'm using the wrong names for these, there seems to be alot of different ones at the borgs these days.

I heard that in some situations those hose that detect fast water flow and shutoff to prevent a flood can bee fooled by the washer's sudden demand for water like that.

Happy Woodworking!

Re: OT - front load washer

#12

watching the laundry

John K Jordan

>>...I sat on a five gallon bucket and watched the whole cycle.

Ha! My wife and I both got chairs and sat in the laundry room and watched our first cycle. It was better than what's on TV these days. I was amazed at how well it worked on so little water and detergent.

And to Don concerning the price of the pedestals, occasionally there are sales with free or 2-for-the-price-of-one sales. The drawers under are nice.

JKJ

Re: OT - front load washer

#13

Lee Gordon

Re: OT - front load washer *LINK*

Lee Gordon

>If you think your washing machine behaves strangely, you should see the one we bought for my mother. It's a washer and dryer, all in one. Not one of those stackable units with the dryer on top. It looks like a normal washer but after the wash cycle is completed, you can set it to dry the clothes and for the next two hours or so, it will do its thing. When it's done, you have to wait about another five minutes before it releases the door lock and you can fish out your dried clothes. Interestingly, the whole machine runs on 110 volt power and does not have a vent.


All-in-One Washer Dryer

Re: OT - front load washer

#14

I sure HATE technology

Mark Goodall - ATL - tooljunkie

>No sooner do you spend big bucks getting the latest thing, then they redesign it making it better, less expensive and takes elss space.

That all in one unit really makes sense from an efficiency point. i'm sure the downside is the complexity and reliabiltiy, but that's the same as cars these days. Used to be a day when I could fix any car, but today in order to get 60+ MPG out of these cars, they are a little less complicated than the space shuttle and I'm afraid to touch them. But you can't beat news cars there days for being efficient. Unless you wait for next year's models ;)

Happy Woodworking!

Re: OT - front load washer

#15

Wow, us too

Mark Goodall - ATL - tooljunkie

>We did that! Of course I didn't have the luxury of watching the whole show because I had to finish cleaning up the construction materials from the whole laundry room renovation, and my wife had to go back to cooking dinner, and I think my 10 year old son had to go back to homework, and my 8 year old daughter watched for quite a while and my 6 year old daugthher, I think she watched the whole cycle!

Memories in the making!

Happy Woodworking!

Re: OT - front load washer

#16

Re: Whoa

Mark Mandell - Gone Round In Jersey

>Watching the clothes wash, eh?

I'm thinking y'all need to get out more.

Not sure whether it's your style, but I hear that there's a freshly painted wall about 6 blocks down that'll take a while to dry. If you hurry you might just catch it.

|;-}}}}}

Re: OT - front load washer

#17

Re: OT - front load washer

Paul Cates - Henderson, KY

>I didn't know such a thing existed...cool! I wonder how "cold" the water must be to cause the moisture from the drying clothes to condense. In the heat of the summer, cold water here is lukewarm since our water supply comes from the Ohio river.

Re: OT - front load washer

#18

Re: Whoa

Scott C. in KC

>Yep, been there and duone that. It's a whole new way to wash cloths. We got the LG set. Choose to stack them instead of side by side. It will wash a little sit, then do some more and sit, so on and so on. Stuff comes out nearly dry. We saw our water bill drop the first month dramitically too. Down side is you have to use HE detergent, which costs more.

Re: OT - front load washer

#19

Re: OT - front load washer

Dan Mitchell

>We got a Kenmore front loader when we moved last April. Yours may be different, but one thing I figured out with this one is to use the "Normal/Casual" setting for just about everything. That one runs about an hour, other settings run as long as 3 hours. Plus, we use the minimum amount of detergent, and of course you have to use the special, low suds variety. Ours locks right after you press start, then in about 30 seconds unlocks briefly to allow you to add something you may have forgotten, then stays locked until the cycle is done. They are designed to use a minimum amount of water, and also to spin very fast in order to expel the maximum amount of water, which decreases the energy needed for drying.

So far, we have been satisfied with ours.

Dan

Re: OT - front load washer

#20

Re: Whoa

John K Jordan

>>...I hear that there's a freshly painted

>wall about 6 blocks down that'll take a while to dry.

I'd choose watching paint dry over a TV reality show any day.

JKJ

Re: OT - front load washer

#21

Hey A Comedian!!

Mark Mandell - Gone Round In Jersey

>He said "TV" and "reality" in the same sentence!

hahahahahahahahahahahahahahahahaha

[ . . . now where'd I leave that brush . . .]

Re: OT - front load washer

#22

A caution....

Barry Irby

>Be careful about the pedestals if your machines will be on the second floor of your house. I believe some of them state you can't use the pedestals on the second story. (Too much sway)

Re: OT - front load washer

#23

Cost?

Joe Pack

>How does purchase price compare to a traditional top-loader?

Re: OT - front load washer

#24

Like everything else....

Mark Goodall - ATL - tooljunkie

>The cost depends on what model you get.

When I was looking last year, there were still one or two few top loader models still for sale, but by far most were front loaders. Like the top loaders, which can buy cheap versions for $500 but also spend $1000 for better quality ones, the same is true for the front loaders, except they tend to be a little higher.

From what I remember seeing the range of the top-loaders were $500-$1000 and the range of the front-loaders was $700-$1400.

I think the top loaders are on average a bit more expensive, because they are newer and there's more demand, and the older top-loaders are coming down in price because there's very little demand for them.

With the drought here in Georgia, there were rebates and tax incentives to get the front loaders.

Happy Woodworking!

Re: OT - front load washer

#25

Re: Cost?

Mickey Elam

>If you have a Sears Outlet in your area, I'd encourage you to shop there. The appliances they have often have scratches or small dents but they do have the full warranty. My wife and I bought the LG washer that was top-rated in the February, 2008, Consumer Reports for about $400 less than list at the Sears Outlet in Houston. It was listed as new and as far as we can tell, there's only one small dent on it.