Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Drawer slides

Posts

Drawer slides

#1

Drawer slides

Ray Binnicker

>I will be building the LOML a kitchen island. She is asking for doors on both sides with full extension pull out shelves that can be pulled out from either side. Any ideas where I may start looking for these ?

Thanks in advance

Ray Binnicker

Re: Drawer slides

#2

Re: Drawer slides

Carol - now in NC Nebraska

>I have never seen metal manufactured slides that would pull from either side and full extension to boot.

I am prepared to become educated - yet again!

Re: Drawer slides

#3

Lee Valley has them.... *LINK*

Nat Robison

>They're called Regular Extension Two-Way Slides


Lee Valley Slides

Re: Drawer slides

#4

Sorry. They're not full extension.

Nat Robison

>

Re: Drawer slides

#5

KV 8400

Howard

>I have used these with success. Ball bearing anachrome or white epoxy coated, full extension, hold up to 100lbs. I like to use #8 3/4" pan head screws to hold the slides to the cabinet sides for extra holding power. I have been getting them from Woodworker's hardware.

Re: Drawer slides

#6

Re: KV 8400

Carol - now in NC Nebraska

>I only see where these go one way. My understanding was these drawers are to be pulled from either side of the island.

Re: Drawer slides

#7

Re: Drawer slides *LINK*

Ken Garlock, Collin County Texas

>Hi Ray. The link below has what you want, I think.

Good Luck with your project,

Ken


Accuride Two-way travel slide

Re: Drawer slides

#8

Re: Drawer slides

Ray Binnicker

>Thanks folks ! Is this Woodcentral great or not?????????????

I knew I could depend on ya'll. I just called her in here and she says she can live with 3/4 slides, as long as they can be pulled from either side. And, if she can live with it, I can certainly live with it.

Thanks again,

Ray Binnicker

Re: Drawer slides

#9

Re: Sorry. They're not full extension.

Larry in NW Ohio

>I realize as I get older I get slower. If a person can open a drawer from both sides of a cabinent, how can it not be full extention

Re: Drawer slides

#10

Re: Sorry. They're not full extension.

Larry in NW Ohio

>I think my mind just caught up with me. I figured it out. Please just excuse me. Larry

Re: Drawer slides

#11

Accuride

Bill Tindall, E.TN

>I use Accuride. We have at least 50# of iron pans on one and it has worked fine for 12 years.

If you get them from a cabinet shop supplier they seem to be greatly cheaper than some other sources. I would expect that their web site would list their distributors.

Re: Drawer slides

#12

Re: Drawer slides

Hal

>Go to Woodworker's Hardware. woodworkershardware.com 1-800-383-0130.

They have a wide variety including a reasonably priced line I've had good success with. Latest catalog is over 500 pages with lots of good stuff. Good luck. Hal