Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Craftsman Carving machine

Posts

Craftsman Carving machine

#1

Craftsman Carving machine

Howard

>Super high price tag but looks real interesting for making CAD carvings and carving reproductions. Anyone own this or know of someone who does. It's meant for small shop use. Curious if anyone has tried it.

Re: Craftsman Carving machine

#2

Its really a Carveright in cognito......

SanMan

>......Ive seen alot of super nice things this machine has done but it is pricey (1800 or so). If your commissioned to do a exterior sign for a business or two, this machine will pay for itself rather quickly.

I've also read theres alot of problems this thing seems to have, but cannot point to anything specific...maybe someone else will chime in here.

Re: Craftsman Carving machine

#3

Re: Its really a Carveright in cognito......

JohnKJordan in East TN

>>...but it is pricey (1800 or so).

I had to laugh at one of the Craftsman sale flyers I got in the mail - they offered a price if you bought three or more of these!

JKJ

Re: Craftsman Carving machine

#4

Check out the lastest FWW...

Kris Lasure

>they had a quick review of this machine and from the picture shown of a piece ran throught machine, it looked really rough.

Seems like the ads I've seen, the carvings look pristine. I guess after several hours of sanding, scraping and handwork they probably would look that way.

I would need to see on in action before I was sold on one. Sort of skeptical of it's worth.

Re: Craftsman Carving machine

#5

Re: Craftsman Carving machine

Larry in NW Ohio

>What I`d like to see is Carveright and a Craftsman side by side and see if they would come out with the same carving. Just to see if Sears cheapened theirs up. Like to see if one is better than the other. Larry in Ohio

Re: Craftsman Carving machine

#6

Re: Craftsman Carving machine

Dick Coers

>Looks like crap to me. If you go to the sears web site and read customer comments, it looks hit or miss if you like it. Some hate it and send it right back, others like theirs and have had to send it back for repair. I have never read about one that runs right out of the box with no problems, or anyone that has not had to send one back. To get down to basics, this thing is a flex shaft carving tool mounted to a computer controlled plotter. It's built that light. I think the biggest problems I have read about is the overheating of the flex shaft, poor grip on the router bit, and faulty readings from sensors that position the carving on the wood. I've also read that you must keep them very clean inside to limit bad readings on the sensors. Not a good trait on something that is carving wood. I would stay away. I also see that Woodcraft is going to sell them. At least Woodcraft has a 100% satisfaction guarantee for 1 year. I think the Sears return policy on it is 90 days. No extended warranties from Sears.

Re: Craftsman Carving machine

#7

Re: Craftsman Carving machine

Kurt in Minnesota

>I own one and while I have had a few problems with it overall I am happy with it, I have sold alot of signs and other items produced with the machine.

The Compucarve is made by Carvewright and is the same machine as the carvewright so they should carve the same


img

Re: Craftsman Carving machine

#8

Re: Craftsman Carving machine

Bruce Page

>I looked into the Carvewright when they first came out a couple of years ago. One owner told me that they are louder than a typical PC690 and when set to cut in fine resolution, an 8� X 12� carving could take several hours. That was a show stopper for me � my neighbors would lynch me AND burn my house down!

Re: Craftsman Carving machine

#9

Re: Craftsman Carving machine

Dick Coers------WebKitFormBoundaryqFOmq51H3saAc+aC

>Kurt,

I've not been able to ask anyone, that owned one, their experiences. I wanted to buy a Carvewright, but they were just at the end of the BETA run and I couldn't quite figure what to do. They seemed to imply at the time that machines purchased after a certain number would have a different warranty. I didn't buy.

If you don't mind;

How long did that sign take? Have you had to send your machine back? Did it run right out of the box? Have you had any bits come loose?

Thanks!

Re: Craftsman Carving machine

#10

Re: Impressive? Yes and No

Brian in Brighton

>It sure is a lot for the price. Anyone who disagrees needs to look into buying a turn key CNC and see how another 0 can add onto the price quickly.

So the price for what you get is impressive. The cut stinks to make any speed from it. It is a great little engineering package and certainly beats the garage look of too many CNC's out there.

However, if you are looking for it to do roughing out of your relief carvings it might be worth looking into very seriously.

It is a flex shaft on a router motor. Too much speed for me to put thru the shaft.

Brian in Brighton

Re: Craftsman Carving machine

#11

That's what happens.....

Mark Goodall - ATL - tooljunkie

>... when you cross a lunch-box planer with a dot-matrix printer ;)

Happy Woodworking!

Re: Craftsman Carving machine

#12

Re: Craftsman Carving machine

Kurt in Minnesota

>That sign took about an hour.

I have had to send mine back for repair (they go back to Carvewright not Sears) they paid for shipping there and back

This sign is the largest I have done, it was done for a customer that built wine racks for the local liquor store, it is a 1"X12"-6' sign that took 3 hours to do


img

Re: Craftsman Carving machine

#13

Re: Craftsman Carving machine

Kurt in Minnesota

>Something like this I run through the machine as a 1"X6" and then cut to length and then rip into 2" wide parts to make the frame, this size takes about 10 minutes to run


img

Re: Craftsman Carving machine

#14

Thanks for the reply, nice work

Dick Coers------WebKitFormBoundaryqFOmq51H3saAc+aC

>