Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Wooden tool box

Posts

Wooden tool box

#1

Wooden tool box

Guy

>Hello folks, Been looking around around for a wooden tool box with lots of drawers for my wife. Gerstner seems to be the only good one I can find, very expensive though. Their international line doesn't seem to be all wood, and the Grizzly boxes don't seem to be all wood either. Any suggestions besides these? I know, I shold make one but my new job, and full time school on top of that makes it unfeasable for the next 6 months or so. Any suggestions will be greatly appreciated.

Re: Wooden tool box

#2

Re: Wooden tool box

Paul Woolson

>Harbor Freight has one. I can't vouch for the quality but the pics of it look ok.

Re: Wooden tool box

#3

Re: Wooden tool box

Doug Reynolds in Seattle

>I've seen some decent ones on e-bay that usually go for about $250 - 350 which is a lot less than retail. I made mine from Woodsmith magazine plans. You're right though, very time consuming with all the small drawers.

This month's issue of Fine Woodworking magazine has a spice box by Steve Latta. This past summer I took a class from Steve on the spice box at Marc Adams school. He told me they take about 100 hours to make if you know what you are doing.

Re: Wooden tool box

#4

Re: Wooden tool box

Bob Lemon Sacramento Ca.

>Costco has some nice boxes a while back. Don't know if they still carry them or not.

Re: Wooden tool box

#5

Re: Wooden tool box

Moses Yoder in White Pigeon, MI

>I guess it's a personal decision. My own opinion is that if you want a box with a bunch of small drawers the vintage Gerstner at about $300 at auction or garage sale is the best way to go. I certainly can't build one for that price, and it's a good box. If you had the time a better option with less cash outlay would be to build your own. But I can't see supporting a company that makes very cheap products that are thrown into the landfill in a few years, just my opinion.

Re: Wooden tool box

#6

Re: Wooden tool box

Robin Corell in Atascadero Ca

>Iv'e built a couple of jewelrey chests patterned after a Gerster box I own. Each drawer has 7 pieces,four sides, a bottom, and 2 drawer guides and each piece has some type of joinery to incorperate it into the structure. My 8 drawer jewelry chests each had 90 individual pieces, not counting drawer deviders or the felt. With that in mind I can tell you that the prices of the Gerster boxes is very reasonable.

Robin