Re: Amen to that!
Marv
>
Knowledge You Can Build On — Est. 1998
Re: Amen to that!
Marv
>
Re: Starrett... Is it worth it?
Ron Jones
>I need the best tools I can afford and in this case that might very well be Starrett. They need to be dead on to allow for my inaccuracies. I have some Starrett tools that I bought used over 40 years ago and they are still dead on.
More than likely !
steve mackay
>
Re: Accuracy and Alternatives
Howard Acheson
>>> While drafting squares may be wonderfully accurate I really don't think they are a viable substitute for a Starret combo. I suppose you could take a plastic drafting square and glue a ruler, a torpedo level and a scratch awl and a marking gauge to it and it would then be capable of doing what a combo can. Of course if you get the combo set with a protractor and center heads you will need to strap on a few more things to that clump of tools that started out as a drafting triangle.
I strongly suggest you re-read my posting. No where did I recommend, or even suggest, that a drafting triangle was a substitute for a combination right angle tool. Of course it's not.
What I wrote about was using a drafting triangle as your shop "standard" and "reference" to check or adjust your right angle tools. A standard is never used in day to day activities. It's used to check the tools you do use in day to day activities.