Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

problem with thickness planer

Posts

problem with thickness planer

#1

problem with thickness planer

Cody Lewis

>I have a Rigid thickness planer that has worked well for me for about a year and a half. However, on the last few projects I've done, the piece I'm planing "sticks". In other words, the black rollers that are designed to keep the piece moving thru the planer don't grip the wood enough. Instead the wood stops and the black rollers peel out against the wood, leaving a black stripe. In the past, I've just nudged the piece thru the machine because it was very rare that it would stick, but now every piece stops mid-stream and sometimes I have to push or pull the wood thru with TONS of effort. It's okay I guess on the projects I'm going to paint because the black stripes get covered up, but on projects that I'm staining with a light stain, I have to spend tons of extra time getting rid of the stipes.

In an attempt to correct it, I wiped all the sawdust and wood chips off the black rollers with a rag, but it didn't fix it. It seems to me like the rollers are not tight enough against the wood relative to the blades, but I can't see how to make any adjustment there.

So here are my questions:

1. Is this a common problem in thickness planers? or maybe it's common to this Rigid brand???

2. Anyone know how to correct it?

3. Should I have paid the $200-$300 extra to get a much better thickness planer?

4. If the answer to #3 is yes, anyone wanna buy a Rigid thickness planer (joking).

Thanks for any help all you experts can give. You have been very helpful in the past.

Re: problem with thickness planer

#2

Lee Grindinger

Have you tried waxing the table?

Lee Grindinger

>I kept planer tables waxed with paste wax and would often use paraffin rubbed on between paste wax applications.

Lee

Re: problem with thickness planer

#3

Re: Have you tried waxing the table?

Barry Irby

>I dont have a Rigid, but I do have a Dewalt lunch box planer.

I would try:

Cleaning the rubber rollers with Denatured or rubbing alcohol.

Checking the tables for alignment, cleaning and waxing them.

Installing sharp knives.

Taking light cuts.

Re: problem with thickness planer

#4

Same Problem With My DeWalt, and Same Fix

George@Colonel's Workshop-Havertown PA

>

Re: problem with thickness planer

#5

I have the Rigid, these tips all work fine

Tim Greif - West of Chicago

>The advice given by the others here is good. I've always waxed the bed, infeed and outfeed supports before planing with SC Johnsons paste wax. Periodic cleaning of the rubber roller surfaces with denatured alcohol is also done. That's kind of a pain because you have to repeatedly bump the motor to get the rollers to rotate so you can get all around them. Haven't had a problem in three years I've had it, but I don't use it a great deal either.

Try the clean and wax procedure and report back with your results.

Re: problem with thickness planer

#6

Re: problem with thickness planer

Larry in NW Ohio

>What was already suggested is what I do to my DeWalt735, but I also take the top off and hone the blades a little, just to put an edge back on them a little. I think it helps. Any comments? Larry in Ohio

Re: problem with thickness planer

#7

Re: problem with thickness planer

Barry Rubenstein

>I use paint thinner on the rollers.

Re: problem with thickness planer

#8

Re: problem with thickness planer

Geary from NJ

>I have the same problem with a 25 yr old Foley Belsaw 5hp, 12" planner. I just figured it was time for a feed roller rebuild. I will certainly try the alcohol&wax solutions. Sure would be a lot cheaper! Thanks Guys!

Re: problem with thickness planer

#9

Wax the tables

Lee Schierer - McKean, PA

>When my Delta Lunch box planer sticks, waxing the tables with paste wax always cures the problem.

Lee

Re: problem with thickness planer

#10

Re: Have you tried waxing the table?

Nathan

>Hi Lee:

I'm dealing with the same problem, which in my case is complicated by the fact that I live overseas and can't get Johnson's Paste Wax. I've come up with a way to wax the tables but I like the idea of applying paraffin in between waxings. I can get paraffin here in blocks. Is that what you have/do? Just a block of paraffin and rub it on?

Thanks,

Nathan in the Czech Republic

Re: problem with thickness planer

#11

Re: problem with thickness planer

Ron Jackson

>Sharp blades and wax, no adjustment needed.

Re: problem with thickness planer

#12

I might add...

Nathan

>I might add that the paraffin I'm considering using is the kind used to make candles.

Re: problem with thickness planer

#13

Lee Grindinger

Pariffin, candles, car wax

Lee Grindinger

>Car wax will work, it's often mostly carnuba, which is too hard to use by itself and is often cut with a very soft wax like beeswax to ease application. If it has silicone don't use it, silicone is the finisher's bane. Paste wax appears as Butcher's wax, Trewax, Johnson's Paste wax and I'm sure a bunch I'm not familiar with. Check with a company that does hardwood floors, it's common to wax floors and someone doing that might have a source for you.

Candles work as does paraffin. I'd simply use either like a crayon and "write" a nice curvy pattern on the tables. I used it on jointers, planers, table saws, anywhere that needed lubrication. Paraffin does not last as long as paste wax but it goes on far quicker.

Lee

Re: problem with thickness planer

#14

Lee Grindinger

Perfect, that's the kind you want.

Lee Grindinger

>

Re: problem with thickness planer

#15

Re: Pariffin, candles, car wax

Nathan

>(I have the exact same problem as the original poster, by the way. The wood sticks in the planer something terrible.)

Where I'm at, in Europe, the problem I encounter is that all the products seem to be over-engineered for a specific application. All car waxes seem to be loaded with silicone, and all floor waxes have antislip additives. In both cases, the additives make the products useless (or worse than useless). So I'm having to resort to buying raw materials and cooking up my own paste. Mark Mandell gave me a recipe and I've got the carnauba but I still haven't got around to doing the actual work.

Ahhh, procrastination.

By the way, I just received the Felder Christmas catalog in the mail today and noticed that they sell a spray for lubricating planer tables. Maybe I'll try that as well.

Re: problem with thickness planer

#16

Re: problem with thickness planer

Cody Lewis

>Wow! What a response! Thanks to all of you for the help. I will try these tips this weekend (since my schedule is insane on weekdays), and I'll report back on how it works. I'm guessing these tips will do the trick since I've never tried any of them previously.

Re: problem with thickness planer

#17

Renaissance wax

JohnKJordan in East TN

>Renaissance wax, used in museums and often on woodturnings, also works well for machine surfaces. It goes on quick AND lasts a long time. I use it on my lathe tool rest, bandsaw table, etc.

JKJ

Re: problem with thickness planer

#18

Re: problem with thickness planer

WRF

>try topcote it works just as well and ur talking spray wipe plane in like 10 seconds

Re: problem with thickness planer

#19

Re: Renaissance wax

Larry in NW Ohio

>John Where would get this renaissance wax? Thank You Larry in Ohio

Re: problem with thickness planer

#20

Dale Lenz

Re: Have you tried waxing the table?

Dale Lenz

>Furniture wax works best for me for all of machine work surfaces. In a pinch I've used wax paper wadded up in a ball and rubbed on the machine surface.

Re: problem with thickness planer

#21

One possibility *LINK*

Nathan

>No affiliation. From a brief web search it appears that the product is made in the UK and is sold in cans in three sizes: 65ml, 200ml, and 2.5 liter. Several of the places I saw selling it had the smallest size (65 ml) overpriced. This one has a more reasonable price.


Conservation Resources International LLC

Re: problem with thickness planer

#22

Re: Renaissance wax

JohnKJordan in East TN

>>Where would get this renaissance wax?

Larry,

I got mine at a Woodcraft store, but Mr Google indicates a wide availability.

JKJ

Re: problem with thickness planer

#23

Re: problem with thickness planer

Michael Wilkins

>I sometimes have the same problem with my jointer/planer machine. Each time the problem is cured by cleaning and waxing the planer table. Runs like cool water afterwards. This is especially important on machines without the bed rollers. Bench top planers and most combo machines do not have these rollers. I never had this problem with my old Parks planer, which had bed rollers.

A little slick maintenance goes a long way.

Re: problem with thickness planer

#24

Wax paper

Nathan

>I read somewhere that the wax on wax paper is carnauba, so I can see why that would work.

Re: problem with thickness planer

#25

waxed paper - paraffin?

JohnKJordan in East TN

>>I read somewhere that the wax on wax paper is carnauba

I know used to be made with paraffin - you could heat the paper the paraffin would melt and drip off. Some may be made with carnauba, but a quick check found this on the Alcoa wax paper info page: "Reynolds� Cut-Rite� Wax Paper is manufactured with a triple coating of paraffin wax onto tissue paper."

Even so, paraffin is a good lubricant (used by millions of kids worldwide to lubricate playground slides!)

JKJ