Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Miter Saw Comparison

Posts

Miter Saw Comparison

#1

Miter Saw Comparison

MoHusker

>I've narrowed my 10-inch miter saw search to the Ridgid MS1065LZ and the DeWalt DW713. Space considerations rule out 12-inch and sliding saws. Does anyone have a recommendation or experience with both? Also, does anyone see much advantage in the new DW713 over the DW703? Thanks.

Re: Miter Saw Comparison

#2

Ellis Walentine

Re: Miter Saw Comparison

Ellis Walentine

>Mo, I haven't run a comparison test of miter saws for a while now, but the last time we did, the Makita saws all scored very high. I'm wondering if you took a look at their offerings.

Ellis Walentine, Host

Re: Miter Saw Comparison

#3

Re: Miter Saw Comparison

Clint Searl, at the base of Haycock Mtn

>Ditto for the Makita.I've had the 10" SCMS for at least 6 years. It's a real workhorse. Accurate out of the box, and remains so. Get the slider if at all possible.

Clint

Re: Miter Saw Comparison

#4

Another "me, too"

Bruce, a MN galoot

>for the Makita. Five years, and it still cuts like glass. Don't bother replacing the blade that comes new with the unit. It's as good as you'll find.

Bruce

Re: Miter Saw Comparison

#5

And me too....

Mark Goodall - ATL - tooljunkie

>Mine's the 12" CMS, about 7 years old. Makita's were one of the few that come with such a quality blade that you don't need to go out and buy spend another $50 for a good blade when you a week after you buy the saw.

Happy Woodworking!

Re: Miter Saw Comparison

#6

Re: Miter Saw Comparison

ScottS

>I couldn't get along without my Delta 12" TwinLaser miter saw. Given the number of times I've needed the extra capacity of the 12" saw, I'm really glad I didn't go with a 10" as I'd originally planned! Is there really that much difference in size between a non-sliding 10" saw and a non-sliding 12" saw?

Re: Miter Saw Comparison

#7

Another Makita vote

paul in AZ

>After some 6 years it is still dead-on accurate and the original factory blade still 'cuts like glass' as was said above.

Re: Miter Saw Comparison

#8

Re: Miter Saw Comparison

Clint Searl, at the base of Haycock Mtn

>I have the Hitachi 12" SCMS w/laser and micro adjust. O.K. as a stationary, but too big and heavy to lug around. The Makita 10" SCMS is still the best all round chop saw.

Clint

Re: Miter Saw Comparison

#9

Re: Another Makita vote

Robin Corell in Atascadero CA

>The makita I have has been out of production for almost 15 years. It is the one with a cast iron base and fence and a huge iron hinge that is non tilting, and no it is not for sale. It is still acurate and works beautifuly. no frills all busness and in my opinion the best 10" miter ever made.

Robin

Re: Miter Saw Comparison

#10

Re: Another Makita vote

matt ankney

>I have the 10" slider and the regular 10" and both are very accurate. Been using them for about 6 years without a glich. Matt

Re: Miter Saw Comparison

#11

Re: Miter Saw Comparison

ScottS

>The 12" Delta TwinLaser that I have is a CMS, not a SCMS. It's a bit heavy, but definitely luggable. Doesn't have quite the cut capacity of a 10" SCMS, but has proven more than adequate for all of the projects I've tackled...