Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Shop Shot In Utero

Posts

Shop Shot In Utero

#1

Shop Shot In Utero

Joanne Adler in Pt. Pleasant, PA

>This lumber may be just in embryonic stages now, but some day it will grow up to be a real Shop Shot. Of what, I have no idea at this time. I just hope to come up with some cool idea by the time this dries. It�s from an Elm Tree that died and had to be taken down on the property of my good friend, Alfred. We split the cost of having a Woodmizer come to saw it up and will split the wood from it. Yesterday (Saturday) dawned clear and chilly. We were waiting in Alfred�s driveway by 7:15 and at 7:30 sharp Gene Hamilton backed his trailer up to the logs. About an hour and a half later he finished cutting about 375 to 450 board feet of Elm (I think. I�m not so good at figuring that all out when the pieces are so oddly shaped. It was a lot of heavy wood, I do know that!), and Alfred and I repaired to his kitchen for a much needed cup of coffee (mmmm, and a well-deserved chocolate cookie). Rested and caffeinated, we donned our gear and went back out to haul the wood up near his barn.

Here�s the stump of the tree. A gas can and the case from a chain saw are sitting on top, to give an idea of size.


While this Elm was NOT as huge as the one Ellis and I saw (that came from Moravian College) at John�s mill, it was plenty big enough for one day�s work of cutting, hauling, stacking and painting with sealer. Here�s that Giant Elm for perspective:


Here are the biggest logs that came from the stump of Alfred's Elm (I have yet to see the Moravian Elm cut up; those folks can't make up their mind about what they want).



Here are some shots of the logs on the Woodmizer. Truly a cool machine and fun to watch. It has all sorts of little gizmos to help move and make a log straight on the bed�once you muscle it up on the hydraulic arms. And there is a little round saw blade that skirts the log ahead of the 24" bandsaw, scoring the bark.





I�ve been told that Elm is hard and can be and difficult to work with. It may be a challenge, but I think some of this amazing figure will make it worth the effort. We cut mostly 5/4 or 6/4 boards. Some may be 8/4 or even 12/4, if it was the last piece of a log.





And there is plenty for future bowl blanks left over (No, Jennifer, not for moi; don�t get too excited�no lathe here yet) and small logs that were, perhaps, too small for Gene to cut.



Thank goodness for Alfred�s Sprinter. We hauled all the boards up from the creek area in one trip. Of course, if we�d been smart, we would have had the van down there when we were cutting and just loaded it right in, so we didn�t have to pick up each board at least 3 times. Anyway, here it all is (next to a pile of old beams and stuff near the barn), stacked, stickered, weighted, and ends painted with sealer. Phshew!




Boy, did I sleep good Saturday night! Now the hard part will be waiting a year or two till it�s dry. I may have to see if I can work out a deal to put some in someone�s kiln. Patience is not one of my virtues.

Re: Shop Shot In Utero

#2

Re: Shop Shot In Utero

Carol - now in NC Nebraska

>Good job, Joanne!

Also love the thread title. :)

Now, how did you get all those pictures in one post?

Re: Shop Shot In Utero

#3

Re: Shop Shot In Utero

JohnKJordan in East TN

>Isn't sawing fun? It's almost like unwrapping a present to see the surprise inside.

I set up a small woodmizer mill behind the barn a while back and I've certainly gotten great use from it. Once the word got around, I have people offering me more trees than I can possibly take, some of which are fantastic like some large walnut and cherry logs, as well as e.r.cedar, oak, persimmon, dogwood, elm, maple, y.poplar, and pine. Good clean fun, but it WILL flat wear you out, especially working alone!

JKJ

Re: Shop Shot In Utero

#4

Re: Shop Shot In Utero

Ron Hildreth

>Joanne,

Some of that wood just screams free form table! The grain figure in it is awesome, to say the least! I'm jealous!

Ron in Iowa

Re: Shop Shot In Utero

#5

Gorgeous Grain

George@Colonel's Workshop-Havertown PA

>Hello Joanne,

About 20 years ago I was asked to restore 23 captain's chairs to a conference table. The chairs were elm, and I thoroughly enjoyed the job, which took most of the summer to do. The grain and colors are wonderful. I loved the elm, and you will bless the day you slabbed it. Its a real shame the wood is not so common now. Same to be said for chestnut, and now the threatened ash.

George

Re: Shop Shot In Utero

#6

drying it

Tom Sontag - St. Louis

>I don't think elm is all that difficult to work with. It has an interlocking grain, which gives it uncommon strength (and makes it chair seat material) but also makes it very difficult TO DRY without defect. You will not be able to put enough weight on top of your stacks to keep it from warping; consider some kind of clamping arrangement that gets tightened as the wood dries and shrinks. Otherwise, those 5/4 and 6/4 boards will ending up being used as 4/4, which is way better than not having any at all. Nice score!

Re: Shop Shot In Utero

#7

Elm actually works well...at dulling cutting tools

Robin Corell in Atascadero CA

>I tend to mill everything at 2 1/4" which cuts down on a lot of the warping. Elm works well it is just very hard on cuting edges. In fact elm is so hard on portable planer knives that they will be toast after just a few passes. I have found it tremendously helpful to convert an old set of planer knives to a york pitch. After working with it and having it dull every tool it touches you will be shocked by how nicely and easily it sands.

Your elm does not look like siberian or red do you have any idea what kind it is. I have one that looks very similar but I never saw the leaves or seeds to help identify it.

Re: Shop Shot In Utero

#8

Re: Shop Shot In Utero

Clay Foster

>Here in Texas we have a lot of what is called cedar elm, I guess because the wood is the same color as western red cedar. I milled a tree last year. It is very hard and dense. It didn't warp or twist much, but I quarter saw everything.

It's hard to get a clean surface on it when turned on a lathe because of the interlocking grain, but it is an attractive wood. The grain is especially dramatic if you char the surface and then fill the pores with a white filler.


img

Re: Shop Shot In Utero

#9

Re: Shop Shot In Utero

Clay Foster

>Photo Sharing and Video Hosting at Photobucket