Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Basement as "kiln" question?

Posts

Basement as "kiln" question?

#1

Basement as "kiln" question?

Barry Irby

>Went and talked to my Doctor yesterday and an actual conversation broke out. Turns out he is a wood worker and also has a bandsaw mill that you mount on the log and push through the wood manually. He mentioned he built a new house with a basement and that he had 5000 feet of lumber in there he is drying by running an AC inside. I gathered he was running a small window unit totally inside the basement. (Not sure, it was a brief conversation.) He commented that his basement was at about 75 degrees and so humid that when he came in from outdoors his glasses fogged up.

I can see how this would be a good way (maybe) to dry the wood, as long as you didn't let it get moldy, but my question is about the house. As a Home Inspector, I see houses all the time that are damaged by wet basements and wet crawl spaces. (In fact, those are usually the overwhelming sources of moisture) Putting 5000 BF of green lumber in your basement would mean you have hauling in literally tons of water. Isn't the house and particularly the floor above going to try to equilibrate to the wetness of the new wood? And, if you had some lumber that was dry and you had it in the basement and then brought in a huge new batch, wouldn't the MC of the older stuff rise? Am I the only one who sees this as not such a good idea?

Re: Basement as "kiln" question?

#2

Doesn't seem smart to me.....

Nat Robison

>I'm no wood-drying expert, but it doesn't seem to wise to bring any source of moisture that large indoors......and it certainly seems like more than a window AC unit can handle.

My house sits on fairly sandy soil and I have no water incursion problems in the basement. When I finished part of the basement this past summer, the drywall guy advised to pick up a dehumidifier as it would help their mud coats cure faster. I was amazed how much water that thing would pull out of the air alone during the summer. I can't imagine that bringing in a big source of moisture and trying to dry it in a basement (of all places) is a good idea.

Re: Basement as "kiln" question?

#3

Re: Doesn't seem smart to me.....

Larry in NW Ohio

>I don`t think it`s a very good idea either. If anything I`d put 6or 7 if not more dehumidifiers and heat anf fans blowing on the lumber. The beter thing and cheaper is to take it to a sawyer with a kiln. Larry in Ohio

Re: Basement as "kiln" question?

#4

No, but how about an attic?

Mark Goodall - ATL - tooljunkie

>150+ degrees...... I could BAKE my wood ;)

Happy Woodworking!

Re: Basement as "kiln" question?

#5

Re: Basement as "kiln" question?

Mark Mandell - Gone Round In Jersey

>He's actually trying to turn his basement into an dehumidification kiln with an a/c unit working as the dehumidifier (not stuck in the window). His first problem is he's got nowhere the removal capacity needed and he's very likely to have 5000 bf of sticker stained wood. If he's reshuffeling his stacks every few days to try to prevent the staining, that would be a full-time job for the first few months! There goes the med practice all for the price of some wood to play with? Poor economics operating here.

This sounds like an "experiment" by a woodworker trying to save money that's not going to turn out like he's planned it. Moreover, with that much water vapor in the residence, he'd better be concerned about toxic mold growth.

mm

Re: Basement as "kiln" question?

#6

Re: Basement as "kiln" question?

John McGaw

>I've done it but not with an AC. I had a large load of custom-sawn sycamore that I wanted to dry and did it using a dehumidifier circulating air through a stickered and tented stack in the basement. It went well and I was able to tell how the drying was going by watching the amount of water the dehumidifier was dumping into the bucket every day and occasionally poking my moisture meter's points through the plastic tent.

Doing the job in a way which intentionally blows super-humid air into the house seems very chancy -- the extra moisture can never do any good.

Re: Basement as "kiln" question?

#7

Eh Gods . . .

Steve Mackay

>I, just, KNOW that unless hes sealed off the ceiling / floor, sills, joists, vents, ducts, well eveything for that matter, to the first floor theres GOTTA be moisture building up inside. Visable mold or not. And then . . . cool moist air in the basement meets warm air from overhead ? Over time I'd bet GALLONS of wet.

Re: Basement as "kiln" question?

#8

MY SIL Did It

George@Colonel's Workshop-Havertown PA

>Hello Barry,

When a hurricane toppled a cherry tree in their back yard, my daughter and SIL had the trunk sections hauled to a mill and slabbed out at 4/4. The lumber sat outside for about a month while common carriage was arranged to return the lumber to their home. It was sent to their dehumidfied basement, stickered and weighted down. They periodically brought slabs to me in their van, and I stored them in the shop for a few weeks. Several hundred bf of cherry was involved. No problems with the wood, with moisture, mold etc. It all worked very well.

George

Re: Basement as "kiln" question?

#9

Me Too

Mark Mandell - Gone Round In Jersey

>I tented 400 bf of fresh cherry in my basement and used a 50-pint dehumidifier in the "bag" to pull it down to 16% before removing the tent (8 mil polyethelene) and allowing ambient dehumidified basement air to finish the job. Took about 3 months to bring it down, and I shuffeled the stacks 3 times a week. Got plenty of cherry to work with, but the time and effort made me appreciate lumber prices.

mm

Re: Basement as "kiln" question?

#10

I knew there was a bunch of "C" student Docs.

Art Silva

>

Re: Basement as "kiln" question?

#11

Re: I knew there was a bunch of "C" student Docs. *LINK*

JohnKJordan in East TN

>Ha! I tell people that 50% of the doctors (or lawyers, or whatever) graduated in the lower 1/2 of their class.

As for the wood drying, this question might get the benefit of professional experience at one of the sawing and drying forums. The one in the link below is the WoodWeb sawing and drying forum. They also have great archives with much wisdom.

Another good resource is the Drying and Processing forum on the Forestry Forum: http://www.forestryforum.com/board/

JKJ


WoodWeb