Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Shop Dog

Posts

Shop Dog

#1

Jim DeLaney, Austintown, Ohio

Shop Dog

Jim DeLaney, Austintown, Ohio

>Got a new shop dog a couple weeks ago. She's Shana, a fifteen week old Standard Schnauzer (NOT a mini).

Anyway, she's being 'indoctrinated' to shop companion duty, and is responding beautifully. She really likes the shop, and so far has found just about every wood scrap that was laying around, along with some rags, clamps, my old boots, and numerous other 'finds.'

She seemed fearless regarding shop noises. Didn't flinch when I was using the table saw, band saw, dust collector, shop vac, etc. Tolerated the Hitachi SCMS, but doesn't really like the noise it makes. Even the air nailers don't bother her.

Then...This morning, I turned on the router table (Hitachi M-12V), and she went nuts! Didn't like that at all. Ran around for a few seconds then went straight to the door. After a walk around the yard to calm her down, she didn't want to go back into the shop. I finally coaxed her back in, but didn't use the router again. Did use the Festool sander with the Fein vac, though, and also the SCMS, and she was once again fine with that. I'm guessing it was the high pitched whine of the router that bothered her.

So, now the question: Since many of you/us have animals in the shop regularly, what machines do they not like? Are they more sensitive to one tool or another? What, if anything, have you tried to get the pet to acclimate to the shop?

I really want Shana to enjoy her time in the shop as much as I do. Short of getting her some doggie ear muffs,I guess I won't be using the router any more when she's with me.

Jim D.

Re: Shop Dog

#2

M-12V Routed Her, eh?

George@Colonel's Workshop-Havertown PA

>Good Morning Jim,

Methinks she can't tolerate the pitch the router motor makes, rather than the number of decibels. Is she skittish around other routers? I suggest you have her watch Norm a couple tines to learn about hearing protection. Further, by watching with her, you'll be able to tell if she can indeed tolerate P+C routers. If so, you can run out and get a P+C 7518,and donate your Hitachi to The Router Workshop. You can visit it occasionally via TV while the dog is in the shop using your new Porter Cable. :<)

George

Re: Shop Dog

#3

Dale Lenz

Re: Shop Dog

Dale Lenz

>Yosi, my father's day female boxer seems to of adjusted to the shop quite well. She runs to the other end of the shop when I shoot some air.

Re: Shop Dog

#4

I think it is me........

Barry Irby

>I have a cat and when I am in the shop he passes through at that speed cats save forgetting out of the way of the truck on the interstate. He has to go through the shop to get outdoors and if he went any faster, body parts would fly off. I have tried to convince him the shop is not totally bad and shed blood for the effort.

Then one night, I went into the shop and flipped the light on. There he was, sleeping on the rubber mat in font of my lathe. He looked embarrassed for a few seconds and then flew out of there. So I guess it's me in the shop that scares him. He sleeps on my bed with me and sits in my lap when I am not in the shop.

Re: Shop Dog

#5

Re: Shop Dog

Ron Hildreth

>Jim,

It's not unusual for a dog to be alarmed at some noises and not others. Our 12 yr old Rat Terrier was terribly scared of any machine I turned on, especially if I used my P-C brad nailer. I thought it was just the breed. She lost her life about a year ago, and we since have bought another Rat Terrier who is now 11 months old. Turns out not being just the breed, as "Bella" is comfortable with any machine I use, save one- the dust collecter! And it's not the noise, but rather the lower bag, as it moves around a little until it's about half full. I think she thinks that there is something in that bag that might hurt her. She is gradually getting better with it, but I have to be careful to not turn it on if she is standing next to it while it's less than half full. With time she'll be good with it.

Try introducing a particular machine to her a little at a time, starting with ones that she doesn't show much or any alarm to. Work your way up the decibel ladder, allowing her to investigate each without it running, then turning it on and then off quickly. Talking to her to reassure her helps, too.

Please be aware that because their ears are so sensitive, some noises can actually be painful to her. If this is the case, there might be nothing you can do short of not using that piece of equipment in her presence. She'll thank you in the end by becoming totally devoted and loving to you.

Ron in Iowa

Re: Shop Dog

#6

Jim DeLaney, Austintown, Ohio

Re: Shop Dog

Jim DeLaney, Austintown, Ohio

>Ron Hildreth said: "Try introducing a particular machine to her a little at a time, starting with ones that she doesn't show much or any alarm to. Work your way up the decibel ladder, allowing her to investigate each without it running, then turning it on and then off quickly. Talking to her to reassure her helps, too.

Please be aware that because their ears are so sensitive, some noises can actually be painful to her. If this is the case, there might be nothing you can do short of not using that piece of equipment in her presence. She'll thank you in the end by becoming totally devoted and loving to you."

That's pretty much what I've done. I tried each piece of equipment, and watched her reaction.

As I said, she doesn't mind the tablesaw, bandsaw, drill presses, etc. She tolerates the Miter saw and the dust collector, although she does show a small reaction to them. She really surprised me when she didn't show any reaction to the nail guns, and actually will walk up to the Fein vaccuum while it's running. (She doesn't mind the wife's Dyson vaccuum, either.)

It's just the router - so far - that has bothered her. I'm pretty sure it's the high pitched whine of the universal motor that bothers her. I may experiment with the PC or Milwaukee router, but I certainly don't want to spook her from the shop. She seems to enjoy being there otherwise, and I enjoy her companionship out there.

I'll probably end up just doing all my routing with her in the house or yard.

Jim D.

Re: Shop Dog

#7

Re: Shop Dog

Mark in Whitby

>Sadie, the Golden Retrvr Shop pup was terrified of the high pitch tools..... forever. She was a tough pup.... growled once at an unknown sound, while positioned squarely behind the rest of us. Even barked once at a knock on the front door.... from the kitchen.

Shop dogs or pups are allowed to have fragile tolerances...

Eventually after being scared out of the shop time and again,despite always comimg in to keep me company..she stayed...deafness does that to you at age dog 13 ...enjoy the pup!.... in the shop or not.. I miss my shop pup to this day and often think of her trying to come in, turning around and getting laid down for a nap..... only to be scared out of the place cause of the noise.. 14 months later since she's been gone, I still look at the door now and again, to see if shes getting brave!!!

Re: Shop Dog

#8

Re: Shop Dog

Larry in NW Ohio

>One thing you might think about when you have a pet in the shop while you are working is,"I wear hearing protection-how about my best friend". I`m no Vet but i think if I need it, don`t they. Everyone have a good and safe week Larry in Ohio

Re: Shop Dog

#9

Jim DeLaney, Austintown, Ohio

Re: Shop Dog

Jim DeLaney, Austintown, Ohio

>MARK SAID: "Sadie, the golden retriever pup...14 months later since she's been gone, I still look at the door now and again, to see if shes getting brave!!!"

Mark,

I know what you mean. My last one was Schultz - another Schnauzer. He passed about two years ago, at age thirteen, after a series of stroke. God, I miss that dog! It's taken me until now to consider having another.

Jim D.

Re: Shop Dog

#10

Re: Shop Dog

john Cotten

>If the puppy is chewing everything in site, make sure you have any electric or air cords or hoses up where it can't get to it. I had a lab pup which chewed into my table saws 220V cord. Could replace the cord but not the dog. The resulting shock killer her.