Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Joe`s Dishwasher (OT)

Posts

Joe`s Dishwasher (OT)

#1

Joe`s Dishwasher (OT)

Larry in NW Ohio

>That post was getting down some so thought I`d start anew. If it`s not getting water in shut the water off and take the hose off and see if the screen on the end off the hose is clear and not plugged with junk. Good luck. Larry in Ohio

Re: Joe`s Dishwasher (OT)

#2

OK Larry. Thanks!

Joe in a Cleveland suburb

>

Re: Joe`s Dishwasher (OT)

#3

Solenoid?

Garrett in Victoria

>I didn't - and haven't - read the original thread since I assumed it was about which new one to purchase. However, having peeked at Larry's comment, and in case no one else has mentioned it, I had a "no water coming in" issue with our Bosch last year. It turned out to be the solenoid, a simple part that wasn't difficult to remove and replace.

Cheers, Garrett

Re: Joe`s Dishwasher (OT)

#4

Update...

Joe in a Cleveland suburb

>Fixed it. Thanks guys. Problem was a broken wire in the front panel of the door where the wires bend underneath the dishwasher.

Terrible design. When the door is opened, the wires are under a lot of stress. This is actually the 4th time I've had to fix a broken wire in that spot.

The way the dishwasher was acting, I didn't think it was a broken wire this time. The guy at the parts place suggested I check before buying anything.

Joe