Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Impact driver/socket adapter question

Posts

Impact driver/socket adapter question

#1

Impact driver/socket adapter question

Barry Irby

>I have a Makita Impact driver that has the little hex drive chuck and the bit snaps in and out by lifting the retaining ring.

I hear about people using them to drive lag bolts. I want to use mine to drive a socket to help me on my bentwood lamination project. I just spent an hour at Lowes trying to find a "driver" that will go from hex to either 3/8" or 1/2" male socket driver. Of course, there was no one there to help me. Does anyone know how to do this? Or do you know what to use in a drill to drive sockets and where to get it?

Re: Impact driver/socket adapter question

#2

Re: Impact driver/socket adapter question

Neal in San Jose

>I have that same impact driver. I found a set of three adapters (one 1/4, a 3/8 and a 1/2) at one of the borgs for less than $10, but I don't remember which borg. I've also seen them in a couple of the catalogues. They aren't scarce and they do work well. Try HD next.

Re: Impact driver/socket adapter question

#3

Re: Impact driver/socket adapter question

Gary Camp Bend, Oregon

>I have purchsed them in the past at HD on a DeWalt "card". Lee Valley also has them.

glc

Re: Impact driver/socket adapter question

#4

Re: Impact driver/socket adapter question

Ron Hildreth, Alta, Iowa

>Barry,

For a better selection, try an automotive parts store like NAPA, O'Rielly's, Auto-Zone, whatever you might have in your area. Might be a little higher priced, but usually get a life-time warranty with it. Take your impact with you, and the parts man can fix you right up!

Ron in Iowa

Re: Impact driver/socket adapter question

#5

Re: Impact driver/socket adapter - got mine

Carol - now in NC Nebraska

>at Harbor Freight!

Handy.

Re: Impact driver/socket adapter question

#6

Re: Impact driver/socket adapter question

Larry in NW Ohio

>Barry I bought a few at Harbor fright. One suggestion whenyou buy some buy at least 6 of each. I bet I bought at least that many and I can`t find any of them. Just a warning. Larry in Ohio

Re: Impact driver/socket adapter question

#8

Have you ever noticed?

Ron Hildreth, Alta, Iowa

>As soon as someone wants or needs something, we all turn into salesman! Don't get me wrong, I think that's what makes up the strong friendships that developes here on WC!

Maybe I notice it more than most, but at the day job I work, eight of us wouldn't hardly give each other the time of day, much less help each other out like we do here. Oh, well. One or two more years and I'll be outa there!!

Sorry--but that little rant made me feel much better!

Ron in Iowa

Re: Impact driver/socket adapter question

#9

Jason Roehl in Lafayette, IN

That's partly why...

Jason Roehl in Lafayette, IN

>...I'm self-employed. I never did like that attitude you describe. I saw it at various places I worked previously, and in school/college, too. If I learned something, I was always willing to share it. Many others didn't share that approach.

I'm sometimes hesitant to give out advice from my profession (painting), but I do anyways. Why? Because until I am some semblance of a master woodworker, it's what I have to offer here in return for the wisdom and knowledge shared by those who have made a lot more chips and dust than I have.

Jason

Re: Impact driver/socket adapter question

#10

Re: That's partly why...

Barry Irby

>Jason, Thanks for the link. I'm going to try HD because they are so close the distance could be measured in yards without sounding odd, but if they don't have it, I will try Sears next.

About sharing info, I appreciate your info on painting. This is a good group and we share freely, but some of the info is better or backed by more knowledge than others. Each of us has to check what we are told against common sense and sometimes even the giggle test. After a while we begin to learn which people have the knowledge we can count on. I always read your posts on painting carefully. Thanks for those.

The Home Inspections group (ASHI) I'm in shares freely. We E-mail pictures to each other almost daily and pass around comments on the defects. To me this is even more amazing than Wood Central. If you help me with my painting, it costs you nothing but the time. I'm too far away to compete with you or to hire you, but the guys in the ASHI Group are not only my piers, but my competition. We all benefit and I want to have excellent competition.

Re: Impact driver/socket adapter question

#11

Thanks, I found one.... or three

Barry Irby

>After somebody posted a picture and I slept on it, I realized I had one all along. I have bought a bunch of those sets of bits for various things. I have one I carry with my inspection tools and there was the adapter I needed in there, except that it was 3/8" and my deep socket takes a half inch drive. Went to HD and sure enough they had one, but were out of the 1/2" drive version. They apparently did not sell a deep 3/8" drive socket either. So, back to Lowes to buy either a socket or a driver. Today they had a helpful person at Lowes, and they had the driver, but the socket was cheaper.

After I got all that worked out, I clamped up another guitar stand. Worked great. Practice makes perfect. Like everything else I do, just about time I get finished I will be good at it.

Thanks for the help.

Re: Impact driver/socket adapter question

#12

Oh Barry,

George@Colonel's Workshop-Havertown PA

>I'm glad Lowes didn't socket to you. :<)

Were you really ready to even GO INTO Sears??

George

Re: Impact driver/socket adapter question

#13

Jason Roehl in Lafayette, IN

Now, George...

Jason Roehl in Lafayette, IN

>While Sears has for some reason decided to tarnish its own reputation for tool quality, their mechanic's-type hand tools (Craftsman line only) have actually seen some overall innovation and improvement, and due to the lifetime replacement guarantee and the prevalence of Sears stores, their wrenches and such are the only ones I'll normally buy.

Jason

Re: Impact driver/socket adapter question

#14

Re: Now, Jason.

George@Colonel's Workshop-Havertown PA

>I do agree about the hand tools working well, and about the lifetime guasrantee, and also the innovations. However, I find the stuff I have bought from Sears within the passed 8 years or so to have finish inferior to Ace Hardware, as well as having a slightly higher price. I wish you could see my spanner wrenches as a specific example. I find the sockets pretty high also.

George