Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Tambour door

Posts

Tambour door

#1

Tambour door

David Haywood

>I want to build a small cabinet (14X24X8) for a bathroom wall. Does anyone have any experience building a tambour for a cabinet only 8 in. deep. Will this work? Is that deep enough for the door to roll up and out of the way?

Re: Tambour door

#2

Jim DeLaney, Austintown, Ohio

Re: Tambour door

Jim DeLaney, Austintown, Ohio

>The tambour in my kitchen "appliance garage" rolls up onto a reel - sorta like a window shade - instead of using a long track behind the cabinet like typical tambour does.

The roller mechanism is only a couple inches in diameter. If you have a couple inches to spare at the top, it'd easily fit into an 8 inch deep cabinet.

Woodworkers hardware (www.wwhardware.com) has them. Rocklers probably does, too.

Jim D.

Re: Tambour door

#3

Re: Tambour door

Lee Brubaker

>David:

This cabinet is 7" deep & the tambour slats are 3/4" wide. The tambour track runs up the front, across the top, down the back & then loops toward the front track below the drawer.

Lee


img