Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Source for Small Motors

Posts

Source for Small Motors

#1

Source for Small Motors

Chicago Bob

>I having been trying to source single phase, 110 v, 1725 rpm motors for a couple of sanding machines I am putting together. I need both a 1/2 to 3/4 hp and another 3/4 to 1.0 hp motor.

Looking at brands I know, i.e., Leeson & Baldor, I'm getting sticker shock on pricing fom the interet.

My target price is around $100 each. Is this wishful thinking?

Your recommendations & help is greatly appreciated.

Regards,

Chicago Bob

(TN Mountain Boy lost in Chicago)

Re: Source for Small Motors

#2

Re: Source for Small Motors

Philip F Duffy

>Check your yellow pages for an electrical motor rewind shop. They usually have that kind of motor at a very reasonable price. Good hunting. Philip

Re: Source for Small Motors

#3

Re: Source for Small Motors *LINK*

Ron Hildreth, Alta, Iowa

>Bob,

Have you tried Grainger, Yet

Ron in Iowa


Grainger

Re: Source for Small Motors

#4

Re: Source for Small Motors

Larry in NW Ohio

>I just looked in my surplus center catalog, www.surpluscenter.com, and on page they have TEFC motors, WEG is the brand. Maybe some one else can tell you about them. But the price is $110-$145 for 1HP. I have done buisness with a couple times and they did good with me. Larry in Ohio

Re: Source for Small Motors

#5

Check Harbor Freight and Northern Tool.

Barry Irby

>

Re: Source for Small Motors

#6

Re: Source for Small Motors

peter kolb

>Chicago Bob, I purchase almost all of my electric motors from Burden Surplus Center www.surpluscenter.com For your application I would be looking @ a fan cooled, totally enclosed motor. I just last week purchased a 1/2 HP TEFC 3450rpm for $112 new, Hope this helps Peter in south central nj

Re: Source for Small Motors

#7

Good Outfit, Second the Recommendation

George (Oxford, NC)

>

Re: Source for Small Motors

#8

Re: Source for Small Motors

JohnKJordan in East TN

>I used to get motors from old gasoline pumps which had been removed from service. These are very high quality, sealed, and supposedly explosion proof (i.e., won't make sparks). Free if you find the right source.

JKJ