Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Table Saw Thoughts

Posts

Re: Table Saw Thoughts

#26

Re: Feedback

Jay St. Peter - Southern, MD

>After getting my Festool saw, I made a "portable" cutting table for it. I found I used it enough that I always leave it set up now and push it around the shop. That made me start thinking the same thing as you. I don't really think I want to be without the TS, but I've definitely been considering reducing my rip capacity from 50 to 30.

Every time I consider being without the TS, my thought is on repetition. Making parts the same size so things go together easily and square is something my TS does well. I've spent lots of effort (and cash) getting everything right. Relearning all the "methods of work" that I've finally got down just doesn't sound that appealing right now. Maybe someday though.

Think through your last few projects and maybe a couple other major ones you've done in the past. How would you do the stuff you used your table saw for? Would it be tedious and take a long time? Just some thoughts.

Jay

Re: Table Saw Thoughts

#27

Re: So you're well aware

Glenn Madsen near San Francisco

>that sometimes, the folks over there can be a little 'different'.

It's my first landing spot. And, when the kitchens and bathroom cabinets are done, I may send my Unisaw off somewhere else, too, and enjoy the quiet side a lot more.

Yep. We can be different.

Re: Table Saw Thoughts

#28

Re: Table Saw Thoughts

Moses Yoder in White Pigeon, MI

>I thought I would get rid of my table saw but then I found this Powermatic 66 at a yard sale in need of a good home ... It is not running yet but I have one more kitchen remodel to do in my lifetime starting next year so the saw will probably be running for that. The table saw excels in cutting sheet goods. If you're not using plywood then push it out the door. The one thing with selling tools though is that they always cost more to replace than what you sell them for it seems like. You might look at ways to use the area around the saw more efficiently such as a cabinet under the table, maybe a wood top for the saw so that it gets used as an assembly bench as mentioned.

Re: Table Saw Thoughts

#29

Ellis Walentine

Right, Rob

Ellis Walentine

>I have my ellipse jig platform as my extension table, and a lot of other people I know have router tables set up in theirs.

Ellis

Re: Table Saw Thoughts

#30

Re: Table Saw Thoughts

Jesse in New Mexico

>Hey Jim,

This is a pretty hot topic among Festool users. Judging from the traffic on www.festoolownersgroup.com, I would guess that many of the younger set who start out with festools may never get a tablesaw. A sizeable number of us older f**ts have sold our tablesaws. Then there are those like me who use both, though frankly my tablesaw gets more use now as an assembly table than as a saw ;^).

The key is the festool multifunction table (MFT). It folds up like a card table, but it has a fence and a hinged guide rail that will cut dead square.

Re: Table Saw Thoughts

#31

Thanks Rob and Ellis, pics

Jim Shaver - Oakville, Ontario

>Hi,

Thanks for the thoughts. As you both have mentioned and others as well I need to think "multifunction"

This is my shop at a glance.

Photo Sharing and Video Hosting at Photobucket

You can see I have used some of the TS footprint for storage, I had considered putting my Jessem router table top in there as well, but I would loose the storage aspect of what you see, but still something to consider.

Photo Sharing and Video Hosting at Photobucket

Another angle

Photo Sharing and Video Hosting at Photobucket

My TS outfeed table is a static wood bench, one I am thinking of adding a vise too for strictly cutting DT's on wider boards...I guess as I look around the shop I see places that I need to rethink. I replaced my planner the other year for one that had a smaller foot print, I have also sold off a variety of tools I no longer use, I sold my Leigh Jig the other day, I have not used it in 4 years.

Photo Sharing and Video Hosting at Photobucket

Again I appreciate the input, kind and thoughtful responses and intertest.

Take care,

Jim

Re: Table Saw Thoughts

#32

A Festool Demo Started Part of This

Jim Shaver - Oakville, Ontario

>Hi Jesse,

It was indeed a Festool demo I attended in the spring at a friends shop that started my thoughts down this path, the table with the fence and circ saw really was an eye opener for me....

take care,

Jim

Re: Table Saw Thoughts

#33

Re: Thanks Rob and Ellis, pics

Rob Stokes in North Vancouver

>Jim - That workbench you have as an outfeed table might be the place to start. Think about losing the dedicated router table. I agree they're nice, but they're not required. I gave a LOT of though about where to put mine and ended up dual-purposing my outfeed table as I mentioned. On first blush it seems a bit crazy but when I thought back over the process and material flow for several projects, never once did I remember any interference if this table would have been there (at the time). To date, this is still the case - I've yet to curse it.

The only thing I'll be doing to change what I've done is to modify the router "box" I made (for dust collection) and adding local drawers for bit/wrench storage. As most router work is done on shorter pieces, most of the time I'm standing directly in front of the router but on longer pieces, I can run them in the direction of the table saw flow and it works extremely well. That "runway" is always clear (fpr the table saw) anyways, so I rarely have to move stuff if I need to use it.

This is an older pic, but you'll get the idea (I've since added T-track parallel to the miter slot track that's for the router fence. you'll note that there's a gap between the TS table and the outfeed table. This means my router fence can slide on front the front or back as needed).

Another thing I did to save space (and I'm not sure if this is an option for you), but I've got the jointer right beside the table saw (on the left side as you stand to use the saw). I adjusted the height of my table saw so that it and the top of the fence of the jointer are at exactly the same height (had to remove the fence tilt knob from the jointer). This allows stock on the saw to go over the jointer and it also means that the jointer fence now does double duty as stock support for the table saw. Direction of work flow is the same for both so again - a shared runway for material.

Rob


img

Re: Table Saw Thoughts

#34

The pics clarify things, and I understand your

Bruce, a MN Galoot

>point, but to throw another monkey wrench into the soup, if you abolish the tablesaw, you're gaining only the space that the TS, per se, occupies, because you'd have to use at least half, maybe two-thirds, of that space for the other gadgets that also occupy that space.

I operate in less room than you have, most of the time, but I have only a not very good, older delta contractor saw. The caveat is that I can roll it out of the way when things require. You don't have that option.

Maybe the Festool option would work well for you. But how would you make the tenon ends of your Morris chair?

Bruce

Re: Table Saw Thoughts

#35

Ooh! Ooh! I know what to do!

Joanne Adler in Pt. Pleasant, PA

>Look at how much room that planer takes up. You now have all those fancy handplanes to use. You should send that planer to ME! And I'll bet if you got rid of some of the old hockey gear I know is lying around up there, you'd have a ton 'o' room. };->

Re: Table Saw Thoughts

#36

Re: Ooh! Ooh! I know what to do!

Jim Shaver - Oakville, Ontario

>Joanne,

Well you made me laugh with that......The hockey equipment is on thin ice now, not sure even I am able to that I will stand in nets again, the fear of contact with a reckless forward and my hip are making me think hard.

That planner is not easily given up....it's about to get a Shelix helical head....

Now if I lived in a palace with a dream shop like yours with all those windows with a view.....I'd never leave.

I like many of the ideas given here, I had never thought of my out feed as my router table till I saw Rob's, I had always pictured it on the side, but on the outfeed is a very bright thought...

Hope you are making lot's of music,

Take care,

Jim

Re: Table Saw Thoughts

#37

Excellent Idea

Jim Shaver - Oakville, Ontario

>That is perfect Rob,

I had always pictured a router table TS combo with the RT on the side, not outfeed, what a great idea, Thanks for posting the picture....My ideas are starting to see some changes.

Take care,

Jim