Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

wood floor for trailer

Posts

wood floor for trailer

#1

wood floor for trailer

Carol - now in NC Nebraska

>I bought a small trailer from Harbor Freight to be my woodhauler and general purpose light trailer to tow behind my Honda Odyssey. The plans call for a plywood floor (not included).

The question is what kind of plywood would hold up the best? I plan to prime and paint it with epoxy paint, probable a light color (beige?). ACX seems kinda overkill, not to mention expensive. CDX is too rough. Tuff-floor T&G?

Here in Nebraska it will be exposed to snow, etc. In Arizona, not only snow, but hot sun, as well.

Thoughts?

Re: wood floor for trailer

#2

Re: wood floor for trailer

Gary Camp, Bend, Oregon

>Hi Carol

I would probably go with C-C plugged and touch sanded (CCPTS). I just bought a sheet of 5/8 CCPTS for $23.something.

glc

Re: wood floor for trailer

#3

Re: wood floor for trailer

Steve Schoene

>And definately paint it--all six sides.

Re: wood floor for trailer

#4

Re: wood floor for trailer

Carol - now in NC Nebraska

>Thanks, Gary. I had never heard of CCPTS, which I assume means both sides are "C" quality, pressure treated sheets? That would be perfect. Now to find that somewhere in North East Nebraska! Plans do call for 3/4"

And, yes, I had planned to paint both sides and the edges.

Any other thoughts out there?

Re: wood floor for trailer

#5

I've had 4 of those trailers

Mark Goodall - ATL - tooljunkie

>Are you talking about those small 40"x48" ones?

I have two right now from NortherTool (identical to HF I think), but owned another one earlier. I also owned one that was 48"x90"

For the first mini one, I used several different plywoods (CDW, etc) over the years and they all rotted out very quickly. My next was the larger trailer and it came with 3/4" PT plywood and that lasted forever with no signs of rotting out.

So now on the two small ones I use, and defintely recommend, 3/4" PT plywood. That stuff just doesn't rot out like the others.

Happy Woodworking!

Re: wood floor for trailer

#6

Painting PT wood? Counter-productive?

Mark Goodall - ATL - tooljunkie

>I always thought that if you paint PT wood, all you do is trap moisture in it causing it to rot faster.

Happy Woodworking!

Re: wood floor for trailer

#7

Re: wood floor for trailer

Grant in Iowa

>Green treat plywood, paint it with spray on roofing sealer (black, in a spray can, and available in the roofing section at home centers). Spray this on and allow to dry (before installing the plywood, but after cutting it to size. Then paint it as you see fit.

I have rebuilt several spas, and use this combo to prevent the mechanical mounting board from rotting. Works pretty good.

FWIW,

Grant in Iowa

Re: wood floor for trailer

#8

Re: wood floor for trailer

Gary Camp, Bend, Oregon

>Carol

One side is "C" the other side is "C" and the knot holes are Plugged with "footballs" (football shapped patches). After the plugging process the sheet is Touch Sanded, I assume to level the patches. Hence the term CCPTS It. is not a pressure treated product. It is available in 3/4" here in Bend and I would think anywhere else in the country.

glc

Re: wood floor for trailer

#9

Re: wood floor for trailer

Al Stokka - Cambridge, Iowa

>Carol,

You might want to reconsider CDX pressure treated. I've had a sheet of �" PT CDX in the bed of my pickup since 1995 and it has survived snow, sleet, ice storms, and Iowa heat and humidity for over 10 years. I hauled everything from green lumber, a 700-pound safe on steel casters, soil, bulk mulch, logs, and brush, to concrete blocks without a problem. Also, about 490 pounds of bagged sand for traction in the snow. Yes, the plies, after about 10 years, begin to delaminate but, the only problem that causes is snagging the sand-bag threads and catching the shovel edge when unloading bulk wood chip mulch. Not bad service for a $12 sheet of plywood. The only thing I did was to cut the sheet to fit the pickup bed length and trim to fit around the truck's wheel wells. No paint, no nothing. I would, rarely, take the plywood out and hose out the bed of dirt, twigs and leaves but, hey, it's a pickup and pickups have "stuff" in the bed.

Al

Re: wood floor for trailer

#10

Re: wood floor for trailer

Pete in Holland, MI

>Definitely use treated lumber. That's what it was designed for. Once painted wood is scratched, it' water sealing coat is compromised. Besides, painted wood will be more slippery and look like hell (from load abuse) long before raw treated wood.

I have a tandem axle trailer that I built 15 years ago with treated 2x10s on it and they're as good as new.......other than the physical abuse.

One piece of advise is to use some cheap grease to grease the steel where the wood will contact it. Any wood deck, once exposed to moisture, will hold it between the deck and steel, rotting out the steel. Grease will protect the steel and the enevitable scratches that will compromise the paint. Being the trailer was purchased at Harbor Freight, I'm guessing there isn't a lot of excess steel built into the frame.

Re: wood floor for trailer

#11

Re: Use the PT plywood and.....

Jamie Donaldson

>... forget about all the painting- it just gets scraped up and yields no benefit. Don't forget to properly load the trailer with some tongue weight during travel,and don't leave the chainsaw in the trailer to bounce out!

Re: wood floor for trailer

#12

Caution on PT

Gene Gauss

>Carol, I don't know about PT plywood, but the new pressure treated wood requires corrosion resistant fasteners (stainless steel, ceramic coated, or double dip galvanized). According to the experts, the chemicals used in the new stuff will cause conventional fasteners to rust away. I would have to guess that everywhere PT plywood contacts the steel structure of your trailer, you would have a corrosion site. I have a sheet of marine plywood in an old 1/4 ton military trailer, and it seems to hold up well. Gene Gauss

Re: wood floor for trailer

#13

Re: wood floor for trailer

Rob Stokes in North Vancouver

>I did mine with Rustoleum. The hardware store had a gallon of "not the right color" that I got for cheap and I was amazed at how it held up (in the Seattle area). It's still going strong, and I did the floor about 8 years ago.

The only thing I was careful to do is when the wear side of the plywood got dinged or worn, I slapped more paint on it to fill the divots etc.

Rob

Re: wood floor for trailer

#14

Re: wood floor for trailer responses

Carol - now in NC Nebraska

>Boy, you give a person a lot to think about!

OK. Pressure treated ply. $40 a 3/4 sheet locally. Trailer floor is 60" x 96". That's $80 for plywood! Yikes!

Thought. Gluing on PT 1x6's on the long edge?

Fasteners. They provided the usually el cheapo not even galvanized carriage bolts, washers and nuts. I really don't want to spring for stainless steel if I don't have to.

Thought. Drill hole and smear fasteners with wheel bearing grease, along with wherever the wood touches metal. I had to buy a small tub of wheel bearing grease, so I have more than enough!

Next consideration. The bolts holding the frame together are hex headed. Should I mortise out the sheet goods for the bolt heads so the wood sits on the (greased) frame? If the sheet stands on top of the bolt heads, won't that make for a wavy floor after a while?

Last, for Jamie. The Stihl will be locked in the back of the van!


img

Re: wood floor for trailer

#15

Re: wood floor for trailer responses

Chuck in ND

>Why not use deck boards or TREX ?

Re: wood floor for trailer

#16

That is why

Mark Goodall - ATL - tooljunkie

>Pressure treated ply. $40 a 3/4 sheet locally. Trailer floor is 60" x 96". That's $80 for plywood! Yikes!

That's on of the reasons why the $200 trailers at HarborFreight don't come with plywood, and the $400 ones at Lowes do ;)

Happy Woodworking!

Re: wood floor for trailer

#17

Re: wood floor for trailer responses

Ken Romines

>Carol

I feel your pain. Plywood trailer beds last 2-3 years in West Texas where the sun is hot and the winds are cold. Like Mark said, try 5/4 PT decking. Locally it is +-$5 at the local borgs.

Now for free advice and worth every penny. Don't fasten the decking to the trailer. Coat the steel with grease, cut the decking to fit (with 1/2inch gaps for drainage). Split one piece of decking in half length wise and fit it on the unside of the deck from side to side at the front and rear of the bed. Cut rebates to bridge over the steel bracing that the deck rests on (does that make sense to anyone?) then use treated deck screws to fasten the decks and cross pieces together. The deck floats and you don't have to worry about corroding fasteners. Give the deck some time to weather, then spray, brush or mop Pentrol or boiled linseed oil on it. I enjoyed the last trailer I did that way for about 10 years and sold it for what I had in it.

Ken

Re: wood floor for trailer

#18

Why not Aluminum diamond plate?

Eddie Pacheco, San Jose, Ca.

>Probably equal to or not much more than the plywood. You can cut it to size with a skillsaw and no need to paint. It also won't use up about 80lbs. of payload like the plywood will. It can be fastened to the steel frame with those self drilling/ self tapping hex head screws, and tt will take a long time for any galvanic corrosion to take place.

I know, I know, I hear ya, go get out there and fix your door shed screwup.

Re: wood floor for trailer

#19

Re: wood floor for trailer responses

JohnKJordan in East TN

>I like to deck with pressure treated lumber, not plywood. If not PT, the wood will rot and one day you will fall through the trailer. However, the trailers I've done are much larger and need to support heavy equipment so the PT ply may be better for your case. I remove wood as needed so things sit flat on the frame - I had to make large rabbets with a handheld portable planer to clear the angle iron down the sides of one frame. If put down green, the boards will shrink leaving gaps for drainage just like a deck on a house, but if put down dry I leave gaps (suspend nails as spacers). PT will last longer if you paint it or spray it occasionally with a wood preservative, but do not treat until after the wood has dried.

Bare steel in contact with PT wood will rust rapidly, especially while the wood is wet and especially squared when using the new PT process. Painted or powder coated steel will be OK unless the coating is compromised, which is likely from scratches or vibration. You might consider isolating the wood from the frame. I'd have to think about how, but my first thoughts are to lay down strips of old rubber innertube or heavy plastic or perhaps roofing paper or shingles on the frame. I don't know what to do if the deck fasteners need to breach the steel finish. One of my trailers has no fasteners through the wood which floats on the frame, constrained by channels at both ends.

BTW, I prefer lumber treated with the old PT process but it's harder, but not impossible, to find. I found regional pressure treatment plants that will sell lumber with the old process. There are certain restrictions in it's use so it is not usually sold through retail outlets, but the restrictions don't apply for my farm use.

JKJ

Re: wood floor for trailer

#20

Re: wood floor for trailer

Larry in NW Ohio

>Carole My suggestion is to put on the lightess material you can find, maybe the aluminum. Because the more weight you use one the floor, is just that much more your vehicle has to pull. I don`t know how big a Honda Oydessy is. Check your vehicles handbook for the towing weight. That is something to really keep an eye on. Towing something is very hard on the vehicle. You may want to check with a more knowlegeable mechanic than I, because I don`t stay at Holiday Inns. You do not want to have Transmission or differential trouble anywhere. BE SAFE> Larry In Ohio

Re: wood floor for trailer

#21

That trailer looks like a great candidate for.....

Scott in Eastern Iowa

>......white oak.....Not red oak.

Find a sawyer locally and see about getting a log cut to your specs.

Maybe he's even got some ready to go already?

Shouldnt be too bad ($$$ wise) here in WO country.

Re: wood floor for trailer

#22

I just realized...

Gary Camp, Bend, Oregon

>How long the plywood floor has been in my trailer. I been kind of amazed at some of the comments about plywood trailer floor only lasting 3-4 years. My trailer is an old pickup bed, mid 50's chevy. I bought it 29 years ago, it sits out side all year, sometimes yard debris sits in it for months between trips to the dump. The floor that is in it now has been there at least 25 years with no special treatment. Not pressure treated, or painted, just plain ole plywood, it is still sound, albeit a bit rough from shoveling "stuff" out of it. I guess it is all in the local climate.

I really like Eddie's suggestion of Al diamond plate. alot of the othe suggestions are to heavy or not stiff enough or both, "Trex" for instance. Larry said it all, you want the lightest weight floor you can get that will still doo the job.

glc

Re: wood floor for trailer

#23

Re: I just realized...

Chuck in ND

>Aluminum diamond plate would sure look nice, but have you people ever priced a sheet of that stuff out ? A .125 thick, 4' X 10' sheet is over $400.

Re: wood floor for trailer

#24

trailer floor decisions

Carol - now in NC Nebraska

>Aluminum plate WAAAAYYY to expensive. It would cost more than I paid for the trailer. Talk about a silk purse out of a sow's ear! But a nice thought, Eddie.

Trex - needs more support that the fame provides and kinda pricy as well.

White Oak, solid decking, etc. - They warned about drilling more holes in the frame, as that would weaken it.

So, plywood it is. Adds to the structural integrity of the trailer, relatively inexpensive. Gonna take two sheets though. PT stuff is pricey and ugly and requires different fasteners.

I will go back to my original intention. Some plugged CDX with more than 3 plys, oil primed and epoxy painted both sides and all edges, fastened down with the included carriage bolts. It will be parked so rain, snow, and other crap will slide off. I will mortise out for the hex bolts on the frame and then apply a thin smear of axle grease between the metal frame and the painted wood to block out trapped water. The holes for fastening it will be drilled before painting so as to slop some paint into those holes as well. Thanks Gary and others for reassuring me.

Thanks, folks. You helped me wade through some options and justify my decisions.

BTW the ramp is having an expanded steel sheet welded to it. That way items with smaller wheels can roll on and off, and air can pass through when zipping down the highway.

And when my turning skills are worthy and I get a bigger lathe, I will put a hoist on one corner to lift and swing gorgeous hunks of burls, spalted, curly, and bird's eye unto my multi-functional woodhauler!

Re: wood floor for trailer

#25

Re: I just realized...

Gary Camp, Bend, Oregon

>Man, I haven't priced it recently, I was just going by Eddie's post. One thing, though, around here you could buy apice 60" wide, have it cut to fit and only pay for what you used, with a small cutting fee. However, 400 bucks is way out of line. I'd probably still go with CCPTS. I my area it would last 20 years, without paint.