Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Need Help With Language for Receipts

Posts

Need Help With Language for Receipts

#1

Need Help With Language for Receipts

Thomas Skaggs, Foothills of Mount Level

>I have a show coming up....my first one. Perhaps nothing will sell and this question will be moot. But just in case good fortune happens and something sells I need receipts. I am making the forms right now. So far I have all the typical form stuff...name of client, address, email, price, terms, lines for tax, shipping, delivery and yada...yada.....

I think I have the basics covered. But what I need are suggestions for any additional language that should be on there....in other words, "the fine print". I'm thinking there should be some language that protects me. Like "All Sales Final"...."Not responsible for damages after delivery"

Anyone have any suggestions?

Thanks

Tom

Re: Need Help With Language for Receipts

#2

Re: Need Help With Language for Receipts

Clint Searl, at the base of Haycock Mtn

>Perhaps the model for direct sales should be the terms for sales made through the gallery where you show.

Clint

Re: Need Help With Language for Receipts

#3

Alan Young

Good question. Here's my solution....

Alan Young

>On my receipts it will say something like this:

All Sales final-For complaints please send e-mail to:

skaggs@fs.uiuc.edu

Actually good question-I need the same advise...Well I hope I need the same advise:^)

Alan

Re: Need Help With Language for Receipts

#4

Re: Need Help With Language for Receipts

Ken Oakley-Sunny St. Cloud, Fla.

>Caveat Emptor is always a good one.

Re: Need Help With Language for Receipts

#5

What is your guarantee?

Bri in Mtl

>I mean, for example, if something breaks due to a glue joint failure or a top cracking due to expansion. I think you have to provide some sort of warranty/guarantee.

Re: Need Help With Language for Receipts

#6

Re: Good question. Here's my solution....

Larry in NW Ohio

>I think Alan has it very close, but it should say. All sales final- any and all complaints email HC Sakman SFWW@ shaw.co. Larry in Ohio

Re: Need Help With Language for Receipts

#7

Excellent Point Bri And Proven Examples

Jim Shaver - Oakville, Ontario

>Bri makes an excellent point Tommy, he has a good reason to make that comment.

For those of you who do not know Bri's work he makes a wide variety of furniture but he makes an incredible Maloof styled rocker. Bri documented on a Canadian forum how a customer came to see him and had broken a few slates in thier chair. Bri offers a warranty/guarantee on his work and while I am not clear on the details I will speak up and say Bri built his chair so it could be repaired. He also treated his customer with a high degree of service, it was an outstanding example of making the customer feel better about the purchase and it went a long way to establish Bri's reputation. It also is a statement that we need to focus on wor to allow it to be repaired rather than glue up up and hope it sticks or the customer just goes away.

I have had a few pen warranty/guarantee issues arise over the years, I like to take that time as a chance to make it better than a simple repair, it's about establishing a relationship and credability. It has always paid me back more than I gave.

Bri, I will never forget that story, you are a class act Buddy.

Take care,

Jim

Re: Need Help With Language for Receipts

#8

Re: Need Help With Language for Receipts

Thomas S Stockton

>Tom,

I'm not sure you need to add anything else. "All sales are final" is a little bit on the cold(harsh?) side and might actually lessen your sales. Clients buying your kind of work are looking for exclusivity and can be turned off by lines like that .I think you would be better off printing a page with your policies on it and how to care for the furniture in warm artsy language. I think that if you explained the nature of custom work and how each piece is unique and there fore if they purchase it there are no refundsit would go over better. If they are serious this won't scare them off. If they have reservations work out a deal to bring the work by their house to see if it looks good.All the galleries I've worked with will do this with established clients and it is fairly succesfull, the problem with a show setting is figuring out who is serious and who isn't so it is not something you want to offer from the start.

If a client contacts me for a repair I usually fix it for free or a small nominal charge. I have one set of chairs that of the 8 I built I've had to do major repairs to 3. one was their puppy chewed through a lower stretcher and two poeple hada few too many martinis and toppled over in them and broke crest rails when they crashed into something. Most the time it takes about 5 minutes to repair a scratch at their home and 1/2 an hour catching up on things and hopefully talking about the next project for them.

I think the bottom line is that word of mouth is very important in furnituremaking and you need be as accomadating as possible but still protect yourself.

sorry for the long rambling answer that probably doesn't really address your origanal ?

Tom

Re: Need Help With Language for Receipts

#9

Nah, YOU are the class act-everyone here knows it.

Bri in Mtl

>

Re: Need Help With Language for Receipts

#10

Re: Need Help With Language for Receipts

Thomas Skaggs, Foothills of Mount Level

>Thanks Tom. You made some good points. I think I'll take out the "All Sales Final" language. Being pro-customer is the best approach.

Thanks

Tom

Re: Need Help With Language for Receipts

#11

Re: Need Help With Language for Receipts

Larry Clinton

>Thomas, I worked about 25 ~ 30 years as a contractor installing just about everything Sears sells plus other brands of furnaces, Central air, water conditioners etc. I also installed new electrical entrances and rewired houses. I did this as a second job. A few things I learned early: 1) I had very little to fear about returns or reworking a job - if you do a good job, you have no problems. 2) NEVER cut your prices, the customer doesn't really appreciate it, and may even think they are not getting your top work. 3) THE MOST IMPORTANT, always go out of your way to satisfy the customer. I have seen many people here ask how to get their name out when starting a business. After my first couple years of contracting, I always had as much business as I could do, even with 1 to 3 people working (part time) for me. (I probably averaged $20 to 40M in business / year - 30 years ago, on my side job). This was all through word of mouth. A well satisfied customer that you have went out of your way to please (even if they caused the problem) will be worth several HUNDRED dollars of advertising in the paper, radio, and tv. I probably had less than 1/2% of customers that I had to go out of my way to please, might have cost me a hundred bucks a year. They alone brought in several times that in profit from jobs obtained through their recommendations. I would have given up the profit on a job to satisfy a customer if needed, just to keep my reputation flawless. When I installed a Sear job, before leaving the residence I always informed the people I personally guaranteed my work - if they had any problems call me - I probably received a couple calls a year, responded immediately and corrected any issues, never had any following problems with those customers. Having seen much of your work here, I'm quite sure it will sell. I also think you will have a zero return rate. People that make the decision to buy your work will be well satisfied. You don't cut corners in either workmanship or materials - think your worrying for nothing.