Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Boot Box

Posts

Boot Box

#1

Boot Box

Lee Brubaker

>I have a good friend that is involved with unloading imported machinery from the U.S. He saves & gives me the blocking which is usually 4 x 4's x 4ft. long. The species varies ie: red oak, maple, cherry, aspen. The entry way boot box was made from several of the red oak 4 x 4's so color and grain matching is not perfect. The raised panels were done on my horizontal router table using a vertical panel bit which allowed me to machine the panels with them laying flat. I'm not a big fan of red oak so I really rubbed in the grain filler & followed that with dark walnut stain followed up with satin wax. It muted the red in the oak although the camera seems to have liked the red tone & strengthed it more than it actually is in real life. It was an interesting small project.

Thanks for looking.

Lee


img

Re: Boot Box

#2

Re: Boot Box

Philip Duffy

>Wow, that is truly lovely, and what great "recycling"! Philip

Re: Boot Box

#3

Re: Boot Box

Don Pierson

>Very creative! I like the unique design. Your finish enhances the wood without making it the overpowering feature. A nice functional piece of furniture.

Re: Boot Box

#4

Re: Boot Box

Kneale Brownson in sunny N. MI

>Neat idea that looks very nice.

I've made several boot benches for folks to sit on while putting on/taking off garden footwear, but always with just a shelf to store the boots and maybe a drawer for gloves and such. The cabinet idea will be my next version.

Re: Boot Box

#5

RED OAK ABUNDANCE

Greg Deavers

>Lee,

I really love Red Oak, I work other hard woods only because in OK, TX Everything is Red Oak! (Not so much White Oak). I think your work is excellent, and as you know matching that 'wild' grain is as much art as it is skill..

Nicely Done Sir!

I would like to build one like yours from Mesquite, if you have plans>? Or a sketch? My email will not be as listed, but is GDeaversREMOVE@TowerTechInc.com

Thank you!

Re: Boot Box

#6

Re: RED OAK ABUNDANCE

Lee Brubaker

>Greg:

Your e-mail address given in your post doesn't work. While I do not have plans for the boot box or even a sketch, I can give you the overall dimensions ie: width 24" height to the top of the lid 16-3/4"

depth 15". The side rails are 3-3/4" from the top of the sides ie: with the lid up. The back rail is set at a 15 deg. angle hence requires a little wider board than the side rails to accomodate the angle. A brass piano hinge was used & this was set flush with the surface of the lid and it's anchor board & is set 1/8" in front of the rear angled rail which is also seated on the anchor board. I set the bottom of the box up 3-3/4" from the floor to accomodate the skirting. E-mail me if additional info is required & will do my best to answer them. After all I can take ruler in hand and trot to the front entry to get any dimension you may require. Regards.

Lee

Re: Boot Box

#7

Re: RED OAK ABUNDANCE

Greg Deavers

>Lee,

Thank you!

I have been out of town for 3 weeks and have not had time to search WC. You are right, and I have changed my profile. That is an email address that I pay for the privelage of receiving hundreds of spams a day, and have given up on deleting all of them.

Greg Deavers