Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Slip Plate

Posts

Slip Plate

#1

Slip Plate

Larry in NW Ohio

>I would like to refine this slip plate lube a little. I went to Graingers and asked for it and they gave me Chain and cable lube. It doesn`t say Slip Plate anywhere on it. Is slip plate a local term or is it what I got the real thing. If not What do they call it in stores. Thank You Larry lost in Ohio

Re: Slip Plate

#2

Re: Slip Plate

JKJ in East TN

>I think Slip Plate is a trade name for dry graphite lube. I bought some once when rebuilding a player piano to lubricate the wood-against-wood sliding surfaces in the vacuum motor.

JKJ

Re: Slip Plate

#3

Re: Slip Plate

Chuck W

>they gave you the wrong stuff.

Re: Slip Plate

#4

Dale Lenz

Re: Slip Plate *LINK*

Dale Lenz

>This be what you looking for?


Slip Plate

Re: Slip Plate

#5

Re: Slip Plate

John Veerkamp

>Slip plate lubricant is a graphite based dry lubricant. It is used extensively for farm machinery. When dry it looks like flat black paint, but is softer. I have used it for the way of my old craftsman tube lathe. It works reasonably well for this application but it will rub off on things. Chain lubricants are a different type of product, though some do have graphite in them, but it does not dry like slip plate. VanSickle paint company makes a slip plate lubricant and is widely available in farm and home type stores, or hardware stores in agriculture areas.

John

Re: Slip Plate

#6

Dale Lenz

Re: I got some...

Dale Lenz

>from John Deere many moons ago, tried it on my son's Pine Wood Derby car, not good for that application, too rough. Will try on other things when I can remember it and if I can find it, : ' >.

Re: Slip Plate

#7

Re: Slip Plate

Matt Robinette,Mt Juliet Tn

>I bought some a few years back at the Anderson's in Maumee. Worked great for under the mower deck.

Re: Slip Plate

#8

Re: Slip Plate

Larry in NW Ohio

>Thanks for all the replys. Yes I thought they gave me the wrong stuff, I guess I don`t need to go to Grainger`s to buy anything any more. Larry in Ohio

Re: Slip Plate

#9

Re: Slip Plate

Mark Wanta

>Following the thread of emails I would like to add some insight. I am the Business Manager from Superior Graphite Co, the mfg of SLIP Plate(R) brand products. SLIP Plate brand products come in a variety of formulations. You can go to www.slipplate.com to find out more. Additionally, you can find a local location to purchase the material from or call our master Distributor at 800-325-0337. The product thta Grainger supplied is not SLIP Plate Aerosol which is our part number (33203G), they supplied you with SLIP Plate Chain & Cable.

Additionally SLIP Plate products are available through some True Value, Ace Hardware , and the stores of the Wheatbelt and Mid-States Distribution groups.

The Dry powder referenced in the thread is our Tube-O-Lube dry powder lubricant.

Re: Slip Plate

#10

Re: Thank you Mark...

Al Stokka - Cambridge, Iowa

>Thank you for taking the time to visit Wood Central.

One never know who might appear in these parts. I just wanted you to know that your information is appreciated. Stop by anytime.

Are you a woodworker as well?

Al

Re: Slip Plate

#11

Re: Slip Plate

Ron Hildreth, Alta, Iowa

>Mark,

I can get the airesol spray Slip-Plate quite readily here in the mid-west, and that's probably what Larry wants, as that's what's been discussed here on WC frequently. But guess we're not familuar with the part number!

Ron in Iowa

Re: Slip Plate

#12

Re: Slip Plate

Larry in NW Ohio

>Mark Thank you for chiming in with the information. Do you frequent this board for a reson or just happened by. It`s a GREAT place. Larry in Ohio