Re: Starting From Scratch
Francisco
>My 2 cents....
Don't know what is your budget, but I prefer to have a few but good tools than many cheap and BAD tools.
One of the most pleasant things at the shop, is being working with Fine tools, of course if you are planning to perform FINE work!
- Circular saw
It is a very handy tool, to break down large material and general cutting. I would consider a Festool, the large one.
- Random Orbit Sander
There is not a more horrible tool for me than a Sander or Dust maker!
I am very happy with the finish I obtain from my $4.50 two cherries scraper
- Router & bits
A Router is a very versatile tool in a workshop, if not the most. Don't think too much which is the one! Go Festool! No other router will hit the quality and excellence of this German made brand.
I have found a really need of two routers in my shop, a handy one and a big one for the table.
Jigs
They will show up in your way...
Full set of clamps
Oh Yeah!
Pipe ones bend when are in duty, I preffer the "I" beam type (Jorguensen), a bunch of them (6'). Also 36" Heavy Duty Bar clamps, small bar clamps and some quick action ones
workbench vise
Take a look on the Workbench book by Scott Landis and pick up the one you like.
saw horses
Build them by yourself, a good ones
chisels
Bevel edge set (1/4, 3/8, 1/2 and 1), find a a Marples Blue set at ebay
Hirsch Mortise chisels (www.leevalley tools)
- levels and squares
Try Square
Starret Combination Square
Mechanical pencil with sharpener
Sliding Bevel
Marking Knive
Divider
Vernier Caliper
Torpedo, 24", 48" and 80" levels
plane
Veritas Bevel up Jointer Plane ($250) Outstanding tool for jointing and end grain work
Smother Plane: #4 1/2
Jack Plane: # 5 1/2
Rabbet Plane (Stanley #93)
Low angle Block Plane
SCRUB PLANE!!!!
Scrapers
Burnisher
Honing guide
Water stones, I only use a King #8000 for final honing, the rest of the work I just place carbide sand paper on a flat glass plate 1/2 thick.
Table saw-
forget it about Shop smith or sears or all that kind of
Clones....
A bad tool purchase is a endless source of frustration, specially tools over $1000.
I would recomend two things regarding this particular tool:
1. a Bandsaw could be more efficient tool at the shop than a limited table saw, specially for jointing work. Today, band saws are more more precise tools than in the past. (www.minimax-usa.com)
2. A good table saw. Maybe $3000 and up.
(Felder, Minimax USA)