Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

14" Reliant band saw lower guide

Posts

14" Reliant band saw lower guide

#1

14" Reliant band saw lower guide

Doug Turner

>The lower blade gude casting cracked on my old Reliant 14" band saw with a riser block. Reliant doesn't sell parts for these.

Dioes anyone know if another brand lower guide can be substitued for repair? I cobbled up a plywood lower guide so I can continue cutting bowl blanks.

Re: 14" Reliant band saw lower guide

#2

Re: 14" Reliant band saw lower guide

Larry in NW Ohio

>Doug Can you send a closeup pic, maybe it can be fixed somehow. Larry in Ohio

Re: 14" Reliant band saw lower guide

#3

Jim DeLaney, Austintown, Ohio

Re: 14" Reliant band saw lower guide

Jim DeLaney, Austintown, Ohio

>Probably any TaiChi 14" saw parts will fit. Check out Grizzly (probably the cheapest) and Jet, Delta, et al.

Another possibility would be to give Louis Iturra (Iturra Design) a call - 1-866-883-8064 - or email him with a picture of the broken guide at KALLL@comcast.net. H'll be able to either provide you with a replacement, or at least tell you what'll fit, I'm sure.

Jim D.

Re: 14" Reliant band saw lower guide

#4

Re: 14" Reliant band saw lower guide

Curt Harms

>As Jim D said, an older Tai/Chi clone, not the newer ones. Another good bet would be the older style Harbor Freight 14"ers, I think they were the same saw with different paint.

http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=32208

does that look familiar? 4 speeds and all

HTH

Curt

Re: 14" Reliant band saw lower guide

#5

Re: 14" Reliant band saw lower guide

Doug Turner

>Thanks everyone. The Harbor Freight blade guide was an exact duplicate.