Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Indy Fest Demo line up and INFO

Posts

Indy Fest Demo line up and INFO

#1

Indy Fest Demo line up and INFO

Jennifer@Indy.USA

>IndyFest Demo line up

So far we have several demos lined up for the weekend.

On Friday late afternoon Dick Coers will be holding a Sharpening Buffet. He will demonstrate sharpening with the Wolverine jig as well as chisels and plane irons and anything else that need to be sharpened. Saturday will start off with Doug Thompson at 10:00am demonstrating turning a hat from a solid hunk of wood. This is an amazing demonstration so you won't want to miss a minute of it. Bring a folding chair as this demo will have you on the edge of your seat and if you don't have a seat, you'll be sorry! After lunch Vince Welch will be showing us how he power sands with various tools including a random orbital sander that you'll just be amazed at the finish it leaves. It sold me and I had to have one. Then after this Dick Coers will show us how he makes a threaded bolt box. It should be interesting! In between and all around these demos there will be lots of other things going at various lathes. I'm sure Duane leach and Al Crandall will be working their magic on at least one lathe and hopefully Dave Pebbles ( I haven't heard from you Dave but I'm calling you out :)....will also dive in and give a show of his incredible talents. These demos are very low key and laid back so please feel free to wander from demo to demo and get a peek at them all.

Also a reminder about the Gift Exchange. This is really fun for all. If you bring a hand made wooden gift (round or flat) made by YOU. You will go home with a hand made gift. It's tons of fun and a great way to leave with a really neat memory. For those who can't make it or want to donate something to the Indy Fest Raffle, you can donate something to the raffle. This could be a turning blank, a gift card to Rockler/Woodcraft, a hand made item, etc. etc. Tickets are sold for $1 each and I'm not sure where the money goes. Ha! Ray help me out here? Back to WoodCentral? In to the IndyFest kitty for next year? Local Property Tax fund? I'm clueless on this one?

Again the times are...Friday September 14th, 3pm-10pm Is that right Ray or was it 9:00? Saturday Sept. 15, 9:00am - whenever the last log in the fire pit dies.

We are asking for a $15 donation to help defray the cost of the food, drinks, paper goods and Porta Potty (which by the way was the nicest Porta Potty I've ever seen!) You'll get lunch on Friday, Lunch and dinner on Saturday. Did I mention that the food is Scrumpdillyitious?

Hope to see many of you there.

Jen & Ray

Re: Indy Fest Demo line up and INFO

#2

Re: Indy Fest Demo line up and INFO

Carol - now in NC Nebraska

>Oooooohhhh....can't wait!

Hopefully someone brings one of those Hunter cutters. I'd like to try one.....

Now can I get there by 3 PM???? Hmmmmm... Will have to hoof it! I bet I get the 'came the furtherest' award!

Re: Indy Fest Demo line up and INFO

#3

Additions to Below!!!

Jennifer@Indy.USA

>I received an email from Ray this morning with some additions that I wasn't aware of. May apologies for just cutting and pasting. These additions are fabulous!

John Lucas (hand held mirrors), Al Crandall (coring, homemade Vacuum

chucks and more), Duane Leach (physics and geometry of tool control),

Jim Dupler (lidded Boxes), Mark Hineman with a Woodmizer, demo of Keith Tomkins bowl thickness gauge. There will be a table set up for folks to practice surface enhancement techniques with someone (Dick Gerard) to help and guide.

Oh, yes and a very special demo by our very own Carole Reed on segmented, multi axis deep hollow vessels with a 1/4" opening. A must see! :)

Lathes setup Vega 26" bowl lathe, Powermatic 3520b, Jet 1642, Jet Mini, Jet 1236. Bring your tools and try out any one of them. We will have material available.

Gallery table, sale or trade table.

So there ya go :)

Jen

Re: Indy Fest Demo line up and INFO

#4

And.......

Lee Schierer - McKean, PA

>At 5 minutes to sunset, Jen will lead the group in singing around the campfire! A treat not going to want to miss. :)

Lee

Re: Indy Fest Demo line up and INFO

#5

Lee, are you coming?!!!?????

Jennifer@Indy.USA

>I sure hope you and Sue can make it!

:)

Re: Indy Fest Demo line up and INFO

#6

Probably not this time!

Lee Schierer - McKean, PA

>It isn't on the agenda, too many acivities too little time!

Lee

Re: Indy Fest Demo line up and INFO

#7

: (

Jennifer@Indy.USA

>We'll miss you!

:(

Re: Indy Fest Demo line up and INFO

#8

Well, I hope someone videos THIS!

Joanne in Point Pleasant, PA

>

Re: Indy Fest Demo line up and INFO

#9

Answering the Call

Dave Peebles Lyons, Ohio!

>Hi Jen,

I would be happy to do something... I will throw the Jet mini in the back of the truck, along with some wood and tools.

I do have to admit I am getting a little geeked up for the gathering. Can't wait to see Doug turn a hat. Should be way cool. :)

See ya soon,

Dave

Re: Indy Fest Demo line up and INFO

#10

Re: Well, I hope someone videos THIS!

Jennifer@Indy.USA

>Joanne, without you and Ellis, Dan and the rest picking your strings, I could never sing. Oh, no....only in the shower....or on-line :)

Re: Indy Fest Demo line up and INFO

#11

Re: Additions to Below!!!

Carol - now in NC Nebraska

>WHAT???

Who is Carole Reed? I am Carol Reed and know little about turning solid stock let alone segmented stuff!

Clarification please!

Carol, who is trying put her eyeballs back in her head after reading that one! Good thing I didn't have anything to drink around the keyboard!