Re: Corian or equivalent conter tops
Steve Kreitler
>You could always scrounge it. I've been collecting drops from a corian counter shop for years to make things from. If I can ever find the time, I'm planning to do our bathroom floors in a random pattern with 2" squares of the stuff- or our counter tops, whichever I manage to get to first.
Some shops toss their drops (large scraps), but since it's so expensive, some shops hang onto it, if they have the room. If you can locate one of the latter shops, you might be able to pick up a large quantity at a fairly reasonable price. Of course, if your wife requires a specific kind/color, you're outta luck on that one.
Corian isn't hard to work- regular carbide woodworking tools will work just fine on it- you have to use a much slower feed speed, though. It will definitely dull your tools, so I would recomend not using your best cutters on it. In fact, in my tablesaw, I've had the best luck using an old skilsaw blade- it seems to clear the chips much better than a 40 tooth combi blade (which can carry chips all the way around, and make gouges in the kerf). This also makes it impossible to mix up my corian blade and my good wood blades.
Oh, and it can be cut and inlayed on the scrollsaw, as well, with some practice. I've made a number of belt buckles with inlaid initials from the stuff. Again, slow the feed and cutting speed, and use a bigger blade than you would for wood- otherwise the chips won't fall out, and will just melt in the cut. Oh, and one other thing- no reverse tooth blades for corian!
I guess that what I'm getting at here is that you could do a mosaic or inlayed pattern with corian, and exercise your creativity- if your wife will go for it :) Myself, I've got a big piece of purple corian sitting here by my desk (the guy at the shop said "take it- we'll never do anything with it"). Now I just have to figure out what to do with it in order to please my purple-loving wife!