>I was wondering if anyone out there has any experience with Hydrocote poly on floors. The website and Highland Hardware say its tough and dries within an hour for sanding and recoating. Just hoping to hear some first hand info. FWIW the floors are Larch (yes, rather soft).
>I have used this product on hardwood floors (Walnut) with great results. Not to say that the product may have changed as the last time was 14 years ago. Tough stuff we are just now considering a new top coat after all this time and the floor is in a high traffic area and kitchen. We will tsp and lightly scuff sand flood on a new top coat and be back in use in one Day.
>Thanks Ron! I made the mistake when I laid the floor in the dining room of listening to a self-proclaimed flooring expert who said that you couldn't/shouldn't put poly on a soft wood like Larch because the finish would crack (why I installed Larch in the first place is another story). We went with an oil and wax finish. Gorgeous but didn't offer any protection other than a little water resistance (no surprise). Since we've committed to the material, it's finally getting extended into the kitchen and I need something to really give it a good finish. Sounds like this is the stuff.