Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Compressor nail gun kit

Posts

Compressor nail gun kit

#1

Compressor nail gun kit

Larry in NW Ohio

>I`m looking at the P-C CFNBNS compressor-nail gun kit at Amazon for $289. I`m wondering does anyone know much about this kit. How good is it, can it be found cheaper else where? Or does Amazon have any coupons for it and how would I get them. I appreciate any info. Thank You Larry in Ohio

Re: Compressor nail gun kit

#2

Can't comment on the compressor

Mark Goodall - ATL - tooljunkie

>...but I've got those three nail guns and they've been perfect for me. I use the 16G the most, and the 18G is just right for some of the thinner quarter round molding, etc. Recently when getting a 3-1/2" framining nailer, I decide to stick with PC because I have been so happy with the smaller ones. It was been equally impressive in the short time I've had it.

The guns don't see daily use (more like monthly) and have been used on home renovation projects and fence building, etc.

Happy Woodworking!

Re: Compressor nail gun kit

#3

Re: Can't comment on the compressor

Bill White

>Have the pancake comp., 16 ga, 18 ga. Have been well pleased w/ them.

Bill

Re: Compressor nail gun kit

#4

Re: Compressor nail gun kit

Nat Robison

>I believe that's the kit I have. I know it cost the same and I got it from Amazon. Mine is about 2 years old so the $289 sounds like it's their standard price.

The compressor is fairly loud.....louder than you may like. This was my first compressor so I wasn't fully up-to-speed on what to look for. I do like the fact that I can carry it around as needed. Read the Amazon reviews for more opinions.

The nail guns have been great. No problems at all during 2 years of homeowner-type use. The guns come with nice plastic boxes to store them in and the nails are available at Home Depot (at least the one near me).

Re: Compressor nail gun kit

#5

Re: Compressor nail gun kit

Ken Bellock

>I bought the kit about 2 years ago, from Amazon. I use it at least every other day. The guns were real handy when I replaced base in the house after a floor job, and I've never had one jam up. It seems like 90% of the time I use it, it is just for compressed air with a basic nozzle to clean off tools or projects when I am sanding/cutting/or just putting the big tools back in the garage. Clean tools are happy tools. I've added on to my air tools with a 3 1/2 inch round head framing nailer, a joist nailer, and the basic nozzle and tire inflator. These all work great, but I also bought a sprayer, and this setup just doesn't have enough to push those guns. I added a small in line filter, and I highly recommend one of those, they are cheap, and it's amazing how much water it stops from going to the gun. With ordering from amazon, if you wait long enough there will always be some better deal that they offer, but if you need them right now, I think it's still a good deal, and their customer service is fantastic. The first one they sent me, had a broken fill sensor. I called them up, and two days later I had a new one, and they paid for all the shipping.

Re: Compressor nail gun kit

#6

Wazzdat?

Mark Goodall - ATL - tooljunkie

>"...a joist nailer..."

I also added the 3-1/2" round head framing nailer. Quite impressive, isn't it, side by side next to the 18G brad nailer.

What's a "joist nailer"?

Happy Woodworking!

Re: Compressor nail gun kit

#7

Re: Compressor nail gun kit

Ken Bellock

>As an after thought, if I was to say anything bad at all about this compressor, it would be that it is very loud. But my solution was to just by 50 ft of hose, and always have the tank sitting somewhere far away if that is going to be a problem. Some day when I have the room and can afford it, I'll get a big stationary compressor, but this was a great starter kit into air tools, and it is very handy to be able to cary the compressor wherever I need it.

Re: Compressor nail gun kit

#8

Re: Wazzdat? *LINK*

Ken Bellock

>I guess the real name for it is an "Impact Nailer," but I just use it for really tight nailing areas like joist hangers, so that's what I call it.


Impact Nailer

Re: Compressor nail gun kit

#9

Re: Compressor nail gun kit

Steven Roxberg

>I don't like how loud any of the pancake (oil less) compressors are. I would recommend a Makita MAC700 which you can buy for around $180 and then add guns as you need them.

I purchased my 18 gauge brad nailer from Grizzly for $29 dollars and it's been awesome.

The Makita is very quiet, you won't mind standing near it when it's running.

Re: Compressor nail gun kit

#10

Re: Wazzdat?

Ken Bellock

>The framing nailer is a hoot! I got the milwaukee, and my only complaint with that one was that it didn't come with a case. I just had to have one after I helped a friend who had the PC reside his house. It saves so much time, and with hardi, one bad swing of the hammer, and the stuff just crumbles away...

Re: Compressor nail gun kit

#11

Re: Compressor nail gun kit

Grant Smith

>A friend of mine who wanted the compressor and I who wanted the nailers bought one at Home Depot about a month ago for $239.

The kit comes with one of the new skinny air hoses as an added bonus.

Not sure if it was a saile price or their regular price...but worth checking.

Regards,

Grant in Iowa

Re: Compressor nail gun kit

#12

Question for Steve or anyone in the know

Joanne in Pt. Pleasant, PA

>The thing I hate most about my PC pancake compressor is how loud it is. This Makita sounds nice. I know somethimes this has to do with oil-less vs. oiled compressors. But what is the difference of 6 gallon (the PC) to 2 1/2 gallon (the Makita)? Is this the amount of air it holds? Would I notice the difference on basic nailing functions? Would it just kick on the motor more often? Thanks.

Re: Compressor nail gun kit

#13

Re: Compressor nail gun kit

Ray SW Ohio

>Home Depot has been known to beat any on-line price. They have for me. My 2�.

Re: Compressor nail gun kit

#14

Re: Question for Steve or anyone in the know

Glenn Madsen near San Francisco

>"But what is the difference of 6 gallon (the PC) to 2 1/2 gallon (the Makita)? Is this the amount of air it holds?"

Yes.

"Would I notice the difference on basic nailing functions?"

No.

"Would it just kick on the motor more often?"

Yes.

Could you use it with a sprayer, a blow gun or a sander? Or with other air tools? Probably not so easily. But many, if not all of those are a stretch for the PC compressor, too. It's a nailer tool, and a 'once in a great while for other stuff' tool, but not really a shop compressor. But you can carry it around, and it will work all day. Just wear hearing protection.

For me, after 9 pm, when I'm still working, I unplug it. When the bradds don't set, I'm done for the night with nailing.

Re: Compressor nail gun kit

#15

Thanks, Glenn--yes, I always

Joanne Adler in Pt. Pleasant, PA

>wear hearing protection when I fire up the PC pancake. I don't use that one for air-sanding or spraying anyhow, so the Makita might be a nice quiet treat one of these days.

Re: Compressor nail gun kit

#16

Re: Compressor nail gun kit

Jim Dillon

>Ken,

Don't want to steal Larry's thread, but what in-line filter did you buy, from whom, and how do you like it? Every year I say I'm going to get one, but so far... .

Jim

Re: Compressor nail gun kit

#17

Re: Compressor nail gun kit

Ken Bellock

>I'm not sure what brand it was, but I got it at the local BORG. I'll guess it was Husky, since that's mostly what they carry. It was the smaller of the two that they carried, and if I remember correctly it was $11 or so. I bought two quick attach adapters for it, and connect it directly to the tank, and then plug in my hose after that. It's small enough to throw in the small tool box I keep all my fittings and small air tools in, and I never run the compressor now without it. I live in Houston, and with the 100% humidity that we usually have, the little filter will fill up a good quarter of the way with just light use. It was definitely worth the $11 to keep that water out of my tools.

Hope that helps!

Re: Compressor nail gun kit

#18

Thank you Ken!

Jim Dillon

>