Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Need advice on lumber series....

Posts

Need advice on lumber series....

#1

Need advice on lumber series....

Bill Tindal, E.TN

>We have covered growing, harvesting, sawing and grading. When I get the pictures we will finish with drying.

Is there any other aspect of hardwood lumber production that you would like to hear about or pictures you would like to see?

Re: Need advice on lumber series....

#2

Ellis Walentine

A big thank you, Bill, ...

Ellis Walentine

>... for a really big (and much appreciated) undertaking. Your "logs to lumber" series has been enlightening for all our visitors. Even old hands like myself can find new realizations in your insightful installments. I will look forward to your final installment on drying lumber and I hope to be included in the loop as we process this collection into a unified article.

Your request for suggestions got me thinking (always dangerous :-)...

Where does the trail lead from here? One thing that you may or may not be ready to investigate or talk about is how the end cost to the user is determined. One way to look at this is as a pie chart, with the final board-foot price (based on different quantities, wholesale and retail) divided up into the respective slices for the grower, the logger, the hauler, the distribution yard or other middleman, the sawmill (including steaming and/or drying), the wholesaler and any downstream retailers in the chain.

Another investigation that might interest our mostly amateur or small-shop-pro base is the question of specialty sawing, including small portable band-mill operators (of which there are more than 50,000 in North America alone). What are the economies and particular considerations of this type of supplier? What about having your own wood sawn up by a portable bandmill? Compare and contrast the costs and benefits of this avenue versus buying KD hardwoods from wholesale or wholesale/retail suppliers?

Next, on the customer end of things, what should customers know or ex-pect when purchasing KD lumber? Protocols of picking through piles, premiums for over-wide or otherwise fancier boards, etc.? How do customers talk to suppliers over the phone? What is the nomenclature that suppliers are prepared to deal with?

I suppose I could go on and on, but you have inspired us so far with so much good information that I am feeling we may be able to drill all the way to the bottom of things here, even if it means taking your idea past its original scope. Feel free to say uncle.

Cheers, and thanks again,

Ellis

Re: Need advice on lumber series....

#3

Re: Need advice on lumber series....

Michael Stadulis, in Gloucester County, NJ

>Bill,

Thanks. I always was interested in seeing what loggers or maybe sawyers looked for on the "outside" of a maple tree to have a good idea that there was curly figure inside. I'm uncertain if that could be easily done, but you did ask.. ;o)

Mike in NJ

Re: Need advice on lumber series....

#4

how do they tell curly logs?

Bill Tindal, E.TN

>If they haven't sold them I will get a picture of two cherry logs at the log yard and it will be apparent to all that they are curly. The "waves" can be clearly seen in the outside of the log.

I once cut a huge maple, 32" at the small end of a 32' long log. It scaled 1310 bdft. A piece of bark broke off the wedge cut out for felling and the surface looked blistered. Indeed, we chopped a bit on the log and the wood looked like it was blistered. I sold the butt cut to someone and we sawed it into heavy planks that I was told went to Williamsburg gun shop. For want of a better term I would have called it blister maple and this pattern was clearly visible beneath the bark.

On the other hand we cut a hug walnut that to my eye had no hint of any unusual grain pattern. However, when it was sawed it was the most curly walnut lumber I have ever seen.

So I guess the bottom line is that curlyness will often telegraph through to the outside of the tree. The curl will also show up in the wedge one cuts out during felling of the tree. I don't live in good maple country so someone that sees more curly maple than I may have additional insight. We do have some curly ash and it is not apparent from the outside of the tree. It is obvious when sawed though.

Re: Need advice on lumber series....

#5

How about....

Scott in Eastern Iowa

>....the whole kiln drying process and getting it ready to go to "market"?

I'd also like to see more pics of the cutting process....band or circular.

Thanks for all the posts Bill, guys like me LOVE this stuff!

Am I the only one who felt each post was too short?

Re: Need advice on lumber series....

#6

Re: Need advice on lumber series....

Dan Donaldson

>Could you get a short video of the mill in action?

Re: Need advice on lumber series....

#7

Re: Need advice on lumber series....

Barry Irby

>How about something on specialty operations like the harvesting of burls or crotches. Seems odd to me that burl wood is so highly prized and yet I hear stories about local loggers leaving burls in the woods or throwing them away.

And how about something on long term storage of lumber? Many of us have a stash of lumber in various amounts, types, qualities, etc. If I wanted to collect wood and keep it "forever" how would I store it?

Re: Need advice on lumber series....

#8

can(will) do

Bill Tindal, E.TN

>

Re: Need advice on lumber series....

#9

answer.

Bill Tindal, E.TN

>The place to get a video from is the saw booth as it has a birds eye view of the operation. But that would involve shooting through the "glass". I don't have video equipment. I will see what I can come up with.

Re: Need advice on lumber series....

#10

Buryl story

Bill Tindal, E.TN

>The first mill I began to hang around was in Newcomb NY. They were sawing a boundary of timber that had huge birch trees, up to 3' diameter. We were getting slab wood from the waste pile for firewood. Some of the slab wood was very annoying because it was so curly that I could not split it. Oh, to have some of that lumber now! Anyway, tossed on the waste pile were huge burls, more than 3 feet long and wide as the tree. Even at that tender age I though what a fine table they would make. But instead they got burned.

The portable band mill operators might fool with burls but they are just a nuisance at a large mill. They are so few that no channel has developed for processing and selling them. Burls are very rare in my neck of the woods. I did see at one mill in this area a few burls piled by the mill. The owner said he saved them for some turner in the area. I doubt the money he got for them paid for the hassle of harvesting them from the logs.

Re: Need advice on lumber series....

#11

Storing wood

Bill Tindal, E.TN

>Wood lasts forever if kept dry and the bugs don't get it. I store lumber dead packed inside and sprayed with Lindane to kill bugs. I have lumber cut 30+ years ago and it is just fine. I store air dried lumber outside on sticks under a waterproof cover, again sprayed with Lindane. I don't care if rain blows on the side of the pile but I don't want lots of rain coming through the top of the pile where it will accumulate and not dry quickly.

The big risk is to get lumber wet where it can't dry out quickly. Under such a case it will mold and eventually rot.

Re: Need advice on lumber series....

#12

Re: How about....

Larry in NW Ohio

>I to really enjoy all the posts and would like to read more. But I appreciate what Bill Does have time to put together, but we must realize that Bill has to have time to enjoy his shop and family. A VERY BIG THANK YOU BILL for all the posts. Larry in Ohio

Re: Need advice on lumber series....

#13

Re: Need advice on lumber series....

Robert Englebrecht

>Bill,

What is/was your background to gain this valuable knowledge you are sharing with us?

Also did you cover shrinkage from log to project? Example if I purchased a 500 bd ft. log; had a sawyer saw, dry and have it ready for a project, how much waste can I expect?

Thanks for your efforts.

Bob

BTW, I am impressed by loggers using draft horses/mules. My grandfather did this years ago and I have fond memories watching the animals working.

Re: Need advice on lumber series....

#14

Re: More on the drying process...

Grant Smith

>Bill,

I have dried a good deal of lumber and I like to think I have a decent grasp on the drying process. There are still lots of questions out there and I know you could contribute a great deal to the subject.

Could you go over the how-to's of air drying hardwoods? I'm thinking the following should be covered:

-Selecting a place to dry lumber (building, outdoor, air flow, flatness of floor, etc.

-Preparing the lumber for drying (cleaning off sawdust, end sealing, overnight on end, etc.)

-setting up a stickered stack (spacing, flatness, what to do with shorter pieces, thicker pieces, etc.)

-to cover or not to cover?

-rotating the stack.

-checking for moisture content

-concerns and how to avoid problems (sticker stain, mildew, light damage, warping)

I'd like to see your insights on this subject.

FWIW,

Grant in Iowa

Re: Need advice on lumber series....

#15

Re: Need advice on lumber series....

Thomas Skaggs, Foothills of Mount Level

>You have done a fantastic job with the series. Thank you for all your good work.

Have you thought about covering the veneering operations side of the business?

Tom

Re: Need advice on lumber series....

#16

Re: Buryl story

JKJ in East TN

>>...Burls are very rare in my neck of the woods. I did see at

>one mill in this area a few burls piled by the mill. The owner

>said he saved them for some turner in the area. I doubt the

>money he got for them paid for the hassle...

Before I set up my own bandsaw mill, I bought green and air dried lumber from a small operation near Knoxville. When he got logs with burls, he cut them off and threw them aside, saving them to give to turners. He gave me what burls he had, no charge, but one was too big for me to move at the time.

Walking my woods, I see several sassafrass and cherry burls I'm keeping my eye on, and a number of oak trees that have "burled" figured wood at the base. I got some beautiful spalted burled oak from one such tree that came down in a storm - the decay that weakened it also produced the spalting.

Setting up a bandsaw mill has been an incredibly useful thing here - there is always need for wood around the farm as well as for woodworking/turning. I've got cherry, black locust, erc, white oak, pine, y.poplar, maple, dogwood, persimmon, and walnut boards dry and drying and piles of logs waiting.

JKJ


img

Re: Need advice on lumber series....

#17

I wanna get me one of those LT-15's.....

Scott in Eastern Iowa

>.....looks like a cherry on the mill right?

Re: Need advice on lumber series....

#18

what I will do

Bill Tindal, E.TN

>I will cover what large commercial operations do in this area in some future installment. What remains is for me to get to a large kiln facility and get pictures. Warning, it involves a whole lot less fretting that some think necessary.

Re: Need advice on lumber series....

#19

veneering

Bill Tindal, E.TN

>I filed a trip report to a veneering plant about 2 years ago. It will be somewhere in the archives. I don't know much about veneering beyond what I learned during this tour.

Re: Need advice on lumber series....

#20

answers

Bill Tindal, E.TN

>I hang around sawmills a lot; also read Part 1.

Yes, I intend to trace a board from woods to retail shop and how its cost grows along the way.

Re: Need advice on lumber series....

#21

Re: I wanna get me one of those LT-15's.....

JKJ in East TN

>>.....looks like a cherry on the mill right?

I don't remember exactly, but I'm sure I didn't cut any cherry that time of the year. Perhaps it is (virgina/scrub) pine. Blowup below.

I did saw a beautiful cherry a few months ago that came down in a storm - 30+ ft straight trunk without limbs, about 20" dbh. I've got two other cherrys about the same size that are going to have to come down at some point. I've had people get upset when I tell them I'm going to use it for shop flooring. Wouldn't cherry make nice workshop floors?

JKJ


img