Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Hard maple legs needed

Posts

Hard maple legs needed

#1

Hard maple legs needed

Mitch from TN

>I'm making a table (my first real commission!!) that will have 4" by 4" hard maple legs that are 42" long. I contacted Adams Wood Products but they were crazy expensive because they were a custom order.

Does anyone have a source for hard maple this thick? Or, does anyone have enough maple for these legs and would be willing to sell it to me?

Thanks!

Mitch

Re: Hard maple legs needed

#2

Re: Hard maple legs needed

john lucas

>Mitch Check with Atlanta Wood products or Jeffries lumber just south of Knoxville. I got my last large maple at those two places but I think it might have been 3 1/2" instead of 4. I don't remember for sure.

Re: Hard maple legs needed

#3

Re: Hard maple legs needed

Larry in NW Ohio

>John Would you post their web site? I would like to see what they have. Thank You Larry in Ohio

Re: Hard maple legs needed

#4

You can make 'em.

Ray Thompson - Middletown,IN

>If you want them solid make them from 8/4 stock similar to the pic. If hollow is ok use whatever thickness you have on hand. You could make them from 3/4" stock them laminate a couple of 3/4" pieces together, plane them down to size and glue it down the center to make a solid piece.

Ray

This is sapwood cherry, then assembled using several of these with a piece of white oak glued down the center making a solid chunk of wood.


img

Re: Hard maple legs needed

#5

Re: You can make 'em.

Bill White

>Osborne Wood Products. Toccoa, GA.

Bill