Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Need hardware help

Posts

Need hardware help

#1

Need hardware help

Pat Evans

>The drawers on my RV tend to bounce open while traveling. Latches just aren't doing the job. I'd like to add locks to the drawers, but I'm having trouble finding locks that will fit. The cabinet face frame is 3/4" thick and the drawer fronts are 3/4" thick. I'd appreciate any recommendations for sources of locks that could accommodate that 1 1/2" thick condition. Thanks.

Re: Need hardware help

#2

Re: Need hardware help

Larry in NW Ohio

>Pat If you wouldn`t want to lock them you could use the child protection devices, they would work pretty well for what you want them for. Larry in Ohio

Re: Need hardware help

#3

Re: Need hardware help

George@Colonel's Workshop-Havertown PA

>Good Evening Pat,

Check the Lee Valley catalog for the little button magnets. The rare earth magnets grip dexcellently and are inexpensive. You need cups, washers, and felt discs besides.

George

Re: Need hardware help

#4

Re: Need hardware help

Loftguy

>Hi,

You might check in a Marine Supply catalogue as such hardware is used extensively in boats. One such might be: West Marine.

Bob

Re: Need hardware help

#5

Jesper, Denmark

Marine Drawers....

Jesper, Denmark

>Have a notch in the drawer sides, so that the closed drawer drops down and the notch fits over the bottom of the cut-out in the face frame. This way they stay closed even when healing close to 90� and have to be lifted a little to open.

In the marine environment additional metal hardware is a pain due to corrosion - even when made from bronze or stainless.