Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Making drawer slides ?

Posts

Making drawer slides ?

#1

JL

Making drawer slides ?

JL

>I am going to have to make a drawer slide (or slides) for a wide drawer that is somewhat shallow. The drawer width is about 28" and the drawer depth is about 10". I was thinking of making two slides to fit under the drawer about 3-4" in from the edges.

Should I make dovetail slides or straight slides?

The drawer carcass will be poplar with a red oak front.

Should I go with poplar slides or go for a harder wood such as red oak or maple?

TIA

Re: Making drawer slides ?

#2

Re: Making drawer slides ?

Larry in NW Ohio

>JL The way I done it on a couple of projects past and the one that is present is to use the slipery tape, that way you don`t need to mess around with the slides. But of course if you don`t like the tape idea for whatever reason, I think I would go with square slides and put the tape on the slides. This will let your drawers slid extremely well. Good luck whichever way you chose. Larry in Ohio

Re: Making drawer slides ?

#3

Oak or maple I'd say...

John in New Mexico

>Poplar is kinda soft and won't last as well. Wax the slides well. Shouldn't need to be dovetailed.

I've also retrofitted drawers with a center undermount bearing guide and UHMW tape on the corners, worked really well.

John

Re: Making drawer slides ?

#4

Re: Making drawer slides ?

George@Colonel's Workshop-Havertown PA

>Good Afternoon JL,

I never put more than one slide on a drawer. No reason why you couldn't, given the width of the drawer. Try it. I like maple or oak for my slides because of the lack of wear over time. If you do use two slides, be careful they are exactly parallel. I would tend not to try sliding dovetails because I believe they would tend to bind if there were any misalignment at all. I wax the slides and the top sides of the dust panel separator frame to insure the drawer slides easily.

George

Re: Making drawer slides ?

#5

Check out the latest FWW (Aug 2007, #192)

Dave Bair, Eaton Rapids, MI

>

Re: Making drawer slides ?

#6

Re: Making drawer slides ?

Barry Irby

>Excuse me for hijacking the thread, but where do you get the slippery tape? And how do you use it? I mean where do you put it? Do you have good luck with it staying put?

I would not try dovetail slides, I would expect them to bind when the weather changed or when they decided you needed more aggaravation in your life.

Re: Making drawer slides ?

#7

Re: Making drawer slides ?

Larry in NW Ohio

>Barry Lee Valley has it #25U04.01 called low friction tape. It`s also in McMaster Carr. Larry in Ohio

Re: Making drawer slides ?

#8

JL

Re: Thanks all..

JL

>I've got plenty of red oak and maple. I'll try it with one slide. I'll probably do a dovetail slide.