Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

TS Blade Guard Plans

Posts

TS Blade Guard Plans

#1

TS Blade Guard Plans

Mkauder, Phenix City, AL Back From Europe

>Now that I need them, I cannot find the plans to a table saw blade guard - you know the adjustable one using a parallelogram?

Point me the way, gang.

Thanks

Mark

Re: TS Blade Guard Plans

#2

Re: TS Blade Guard Plans

John Lucas

>Mark I'm going to build one of those also. I want to add dust collection to it as well. I've saved a piece of pipe to build it. I may have the plans at home. I'll try to remember to look it up tonight.

Re: TS Blade Guard Plans

#3

Re: TS Blade Guard Plans  *LINK*

John Lucas

>


http://www.woodcentral.com/bparticles/blade_guard.pdf

Re: TS Blade Guard Plans

#4

Re: TS Blade Guard Plans

Mkauder, Phenix City, AL Back From Europe

>By Jove, you've got it!! Thanks, John

Yes, I just installed a new cyclone DC system (suction from Hell). Although I am still using 4" ducting, now all the dust I am getting from my Sears contractor TS, is that which is thrown back at me from the back of the blade.

Thanks, new project on the list.

Mark

Re: TS Blade Guard Plans

#5

I'm wondering?????

Barry Irby

>Could I rig up my air compressor to come on with my DC and blow sideways across those rear teeth on my contractor saw and stop the dust coming out of the top of the table?

I have my DC running in a chute that nearly encloses the blade and it makes a huge difference. You can see and smell the difference if you fail to turn on the DC and start the cut.

Let us know what you think of the blade guard/pickup, I hate to admit it, but it might me my next project.

Re: TS Blade Guard Plans

#6

Re: I'm wondering?????

John Lucas

>The guys in our cabinet shop here on campus just hung a 4" hose from the ceiling down to the blade. That one hose collects most of the dust. They told me they took the hose off the bottom just to see. It was after seeing that demo that I put building one of the overarm dust collectors on my list of important things to do.

Re: TS Blade Guard Plans

#7

You might want to

Dominic Greco in Richboro PA

>contact Gordon Sampson about that rig. He installed that several years ago and may have some tips on improving the design.

See ya around,

Dominic

Re: TS Blade Guard Plans

#8

Re: I'm wondering?????

Mkauder, Phenix City, AL Back From Europe

>Barry,

Until I get the blade guard with DC hooked up, I have a small 8" fan blowing on the blade from the front, and that works pretty well, but it does not solve the problem of getting the fine dust out of atmosphere for health purposes.

Mark

Re: TS Blade Guard Plans

#9

Re: TS Blade Guard Plans

Larry in NW Ohio

>This is the way mine turned out. I really like it, I think it`s better than any boughten one and the revised splitter is great. Larry in Ohio


img

Re: TS Blade Guard Plans

#10

Re: TS Blade Guard Plans - Addition ??

Mkauder, Phenix City, AL Back From Europe

>First thanks to all of you for the suggestion, and especially to Gordon for putting out such a wonderful plan.

Next - my TS is a highly amended older Craftsman. Homemade moble base, Joint Tech Saw Train Fence, etc. Though for my segmenting, the TS stays pretty much in place, but for lots of work, I have to move the TS to accomodate the wood. SO.......Anyone got a good overarm design to hang the blade guard from. I do not want something that the air will run through, just a good design to hold it.

Thanks Gang

Mark