Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

What projects do you want to see in Mags?

Posts

Re: What projects do you want to see in Mags?

#26

I LIKE MAGAZINES!

Charles Sharp

>When I'm designing something new, I look through all my old magazines and look at all the images I can find on the net.

If you read them and don't just look at the photos, sometimes you find a different way of doing something. It may not be the best way, but it stirs up the gray matter and may lead you down a different path.

I get a fresh subscription to Wood Magazine each year as a birthday present. I wish they would provide a set of prints for their projects. It drives me crazy trying to follow their written instructions.

As far as projects go, once you get past the skillsaw and hammer group, I like them all.

Lucky for me that I haven't seen it all and done it all and there is still something to learn.

Re: What projects do you want to see in Mags?

#27

I don't have an editoral staff

Joe Piotrowski - Chicago Burb's

>nor am I giving instruction on constructing a dresser made of expensive wood.

I just can't type as fast as I think. if you believe it's ok for magazines to not proof read them because of 1 dyslexic typo and a missing pronoun that I feel sorry for you and your inability to see the forest through the trees.

feel free to harp on my grammar all you want. I doesn't change the facts.

Re: What projects do you want to see in Mags?

#28

Believe it or not!

Lee Schierer, McKean, PA

>I'm not advocating for anyone to change forums, but I frequent the WoodOnline forum and periodically they do a survey to see what sort of projects their forum participants would like to see in upcoming issues. of "Wood"

Lee

Re: What projects do you want to see in Mags?

#29

Re: What projects do you want to see in Mags?

Joe in a Cleveland suburb

>Brian.

I plan on not renewing my subscriptions. FWW and PW. Might keep FWW. Haven't decided. PW is a lot better these days, but it's all the same old stuff over and over. Don't need both. If I keep one it will be FWW.

Sorry, didn't answer your question.

Joe

Re: What projects do you want to see in Mags?

#30

The internet can't completely replace magazines

wilbur

>The big problem with the internet is that you can't bring it with you when you go to the can. :@)

Re: What projects do you want to see in Mags?

#31

Re: I don't have an editoral staff

Tim Caley - North Little Rock

>I meant it to be humorous, not a criticism. Sorry if you didn't perceive it that way.

Re: What projects do you want to see in Mags?

#32

Lee Gordon

Re: What projects do you want to see in Mags?

Lee Gordon

>Several of the items on your wish list are things that AJ Hamler

incorporated into Woodcraft Magazine when, as that publication's original editor, he played a major role in bringing it into the world. There were projects of all sizes and for woodworkers of all skill levels, from simple lathe-turned bottle stoppers to large casework pieces, including projects that spanned a couple of issues. There were also feature stories highlighting the works and wisdom of master woodworkers from David Marks to Sam Maloof.

One thing I can assure you from numerous conversations with AJ is that his focus was always on what would appeal to woodworkers of all stripes, and almost never on what would serve as good bait for luring or appeasing potential advertisers. I suspect that philosphy might have come into play when, after a little more than a year at the helm, AJ was informed that the corporate bigwigs wanted to take the magazine "in a new direction" and that his services were no longer needed. I stopped subscribing when AJ left so, frankly, I don't know how much of his original vision remains intact.

Of course, in appealing to a wide range of woodworkers, there are always going to be some projects that are too daunting for beginners and some features that are old hat to the most experienced. The key is striking a good balance.

Re: What projects do you want to see in Mags?

#33

Depends ;-)

Dan Donaldson

>You could use a wireless laptop and make a lapdesk for it ;-)

Re: What projects do you want to see in Mags?

#34

oops. sorry ...

Joe Piotrowski - Chicago Burb's

>....about anything negative I typed.

I quit drinking coffee so I need to stop posting early. my funny bone is missing until at least 10am.

I also have to stop answer phone for a while but that is another story..

later,

Joe P

Re: What projects do you want to see in Mags?

#35

Re: What projects do you want to see in Mags?

Robby Wright in San Marcos, CA

>I started reading woodworking magazines when FWW was in black and white. Part of the problem for me now is that I have learned alot over the years, so basic technique articles aren't too much interest any more.

What I really miss are the old articles on building tools. Back then, you couldn't get Taiwan and Chinese tools, and the American made tools were frequently out of reach of a home shop budget. I still have a sander that I built from a motor, a collar, a piece of aluminum plate and some misc. pieces of iron. I had a lot of fun building it and probably use is more than any power tool except my tablesaw, drill press and bandsaw.

It would like to see each issue include one really difficult article or project in each issue.

Re: What projects do you want to see in Mags?

#36

Re: on dumb-down measurements..

Jim Shaver - Oakville, Ontario

>So True....

I need another magazine plan for a porch swing like I need another hole in my head.

Take care,

Jim

Re: What projects do you want to see in Mags?

#37

Re: Depends ;-)

wilbur

>I thought about that, once. Laptop CPU heatsink + bare thigh + water (and other fluids) = not a good combination. :@)

Besides, if you happen to drop the thing, laptop vs. tile floor usually results in a victory for the tile. :@)